Legrand 003701 DIN Rail Staircase Timer Instruction Manual

1. Ifihan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Legrand 003701 DIN Rail Staircase Timer. This device is designed to automatically control lighting in common areas such as staircases, corridors, and basements, ensuring energy efficiency and convenience.

2. Alaye Aabo

IKILO: Electrical installation should only be performed by qualified personnel. Always disconnect power at the main circuit breaker before installing or servicing this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply matches the device's voltage rating (230V AC).
• Ma ṣe fi ẹrọ naa han si ọrinrin tabi iwọn otutu to gaju.
• Daju pe gbogbo awọn asopọ wa ni aabo ṣaaju mimu-pada sipo agbara.

3. Ọja Ipariview

The Legrand 003701 is a compact, modular staircase timer designed for mounting on a DIN rail. It features adjustable timing and a manual override switch.

olusin 1: Iwaju view of the Legrand 003701 Staircase Timer, showing the time adjustment dial and manual switch.

Figure 2: Diagram of the Legrand 003701 Staircase Timer, illustrating its dimensions and mounting features.

4. Awọn pato

5. fifi sori

The Legrand 003701 staircase timer is designed for quick and secure mounting on a standard 35mm DIN rail within an electrical distribution board.

5.1 Iṣagbesori

1. Ensure all power to the electrical panel is disconnected.
2. Hook the top clip of the timer onto the DIN rail.
3. Press the bottom of the timer firmly until it clicks into place on the rail.

5.2 Onirin

Refer to the wiring diagram printed on the side of the device (see Figure 2) and the specific wiring requirements for your installation (3-wire or 4-wire connection). Ensure correct connection of Line (L), Neutral (N), and Load terminals. The timer supports a 1-way circuit type.

• Connect the incoming phase (L) and neutral (N) to the designated terminals.
• Connect the load (lighting circuit) to the output terminal.
• For push-button control, connect the push-buttons according to the diagram.

6. Isẹ

Once installed and powered, the Legrand 003701 timer operates as follows:

6.1 Time Adjustment

The timer features a rotary dial on the front panel to adjust the lighting duration. The available settings typically range from 2 to 10 minutes. Use a flat-head screwdriver to carefully turn the dial to your desired time setting.

6.2 Aifọwọyi Ipo

In automatic mode, pressing any connected push-button will activate the lights for the set duration. The timer will automatically switch off the lights once the set time has elapsed.

6.3 Afowoyi danu

The device includes a manual override switch (often indicated by a light bulb icon or ON-ON-OFF positions). This switch allows for continuous lighting (ON), automatic operation (AUTO), or permanent off (OFF) functionality, depending on the model variant. Consult the specific markings on your device for exact positions.

7. Itọju

The Legrand 003701 staircase timer requires minimal maintenance. Regular checks can help ensure optimal performance and safety.

• Periodically inspect the device for any signs of physical damage or overheating.
• Ensure all wiring connections remain tight and secure.
• Clean the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.

8. Laasigbotitusita

If you encounter issues with your staircase timer, refer to the following common problems and solutions:

9. Video Resources

The following videos provide additional visual guidance for understanding and installing staircase timers. Please note that these videos may feature similar products from other manufacturers but offer relevant insights into the general functionality and installation process.

10. Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries, please contact your local Legrand distributor or visit the official Legrand webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.