Ọrọ Iṣaaju
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Aworan: Iwaju view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Key Awọn ẹya ara ẹrọ
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Ibi iwọn otutu ti o tobi: 32 si 572°F (0 si 300°C).
- Programmable Alarms: Set desired temperatures for food and oven; an alarm sounds when reached.
- Iṣẹ Aago: Includes a 10-hour count up/down timer.
- Ikole ti o tọ: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Iṣagbesori pupọ: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Aṣayan Ẹka: Ni irọrun yipada laarin Fahrenheit ati Celsius.
- Agbara: Operates on 1 AAA battery (included).
Ṣeto
- Fifi sori batiri:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Asopọ Iwadi:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- Ibi:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Aworan: Ẹyin view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Awọn ilana Iṣiṣẹ
Iwọn Iwọn otutu
- Fi Iwadi sii: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Agbara Tan: Tẹ awọn TAN/PA button to activate the thermometer.
- Yan Ẹka: Tẹ awọn °F/°C bọtini lati yi laarin ifihan Fahrenheit ati Celsius pada.
- Set Food Temperature Alarm:
- Tẹ awọn MODE button until "FOOD" is selected.
- Tẹ awọn ERAN button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press SET to manually adjust the target temperature using the HR ati MIN awọn bọtini.
- Tẹ ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Tẹ awọn MODE button until "OVEN" is selected.
- Tẹ SET to manually adjust the target oven temperature using the HR ati MIN awọn bọtini.
- Tẹ ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Aago Išė
- Yan Ipo Aago: Tẹ awọn MODE button until "TIMER" is selected.
- Ṣeto Akoko: Lo awọn HR ati MIN buttons to set the desired countdown time (up to 10 hours).
- Bẹrẹ/Duro: Tẹ awọn Bẹrẹ/Duro button to begin or pause the countdown.
- Tun: To clear the timer, press and hold the Bẹrẹ/Duro bọtini.
Itoju
- Ṣiṣe ayẹwo naa: After each use, wipe the stainless steel probe with a damp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Ninu Ẹka naa: Wipe the thermometer unit with a soft, damp asọ. Ma ṣe lo awọn olutọpa abrasive tabi fi omi mọlẹ kuro ninu omi.
- Ibi ipamọ: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Rirọpo Batiri: Replace the AAA battery when the display becomes dim or unresponsive.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si ifihan tabi baibai àpapọ | Kekere tabi okú batiri; fifi sori batiri ti ko tọ. | Rọpo batiri AAA, ki o rii daju pe o tọ polarity. |
| Awọn kika iwọn otutu ti ko pe | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Itaniji ko dun | Alarm function not activated; volume too low. | Tẹ awọn ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Awọn pato
- Awoṣe: DSP1
- Iwọn otutu: 32 si 572°F (0 si 300°C)
- Gigun Iwadii: 6.75 inches (17 cm)
- Gigun USB: 39 inches (1 m)
- Orisun Agbara: 1 x Batiri AAA (pẹlu)
- Iru ifihan: LCD oni -nọmba
- Awọn ohun elo: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- Awọn ẹya: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Awọn iwọn (Ẹyọ): Approximately 7.5 inches (H) x 3 inches (W) x 0.625 inches (D)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Alaye atilẹyin ọja
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.
Atilẹyin
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN webojula.
Olupese: CDN
Webojula: www.cdn-timeandtemp.com
Foonu: 800-338-5594
