1. Ifihan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Goobay 30003 LED Transformer. This device is designed to convert AC power to 12V DC, suitable for powering LED lighting systems with a total load of up to 30 watts.
Jọwọ ka awọn ilana wọnyi ni pẹkipẹki ṣaaju lilo ati mu wọn duro fun itọkasi ọjọ iwaju.
2. Awọn ilana aabo
- Aabo Itanna: Installation and connection must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations.
- Ge asopọ agbara: Always disconnect the power supply before performing any installation, maintenance, or troubleshooting.
- Agbara fifuye: Do not exceed the maximum load of 30 watts. Overloading can damage the transformer and connected LEDs, and poses a fire risk.
- Afẹfẹ: Ensure adequate ventilation around the transformer to prevent overheating. Do not cover the unit.
- Ayika: This transformer is designed for indoor use. Avoid exposure to moisture, direct sunlight, and extreme temperatures.
- Kilasi Idaabobo II: The transformer features safe electronic separation as per protection class II, meaning it has reinforced insulation and does not require a protective earth connection.
- Furniture Installation: This unit is approved for installation in furniture, provided proper ventilation and safety clearances are maintained.
3. Ọja Ipariview
The Goobay 30003 LED Transformer is a compact and efficient power supply for 12V DC LED applications. Key features include:
- DC current source for LEDs with electronic ballast unit.
- Flat design for space-saving installation.
- Approved for installation in furniture.
- Safe electronic separation as per protection class II.
- Abajade ibakan voltage for parallel circuits.
Nọmba 1: Goobay 30003 LED Transformer. This image displays the top view of the white rectangular transformer, showing the input terminals (PRI: 200-240V~) on the left and output terminals (SEC: 12V===) on the right, with clear labeling for N, L, + and - connections.
4. Eto ati fifi sori
Tẹle awọn igbesẹ wọnyi fun fifi sori ẹrọ to dara:
- Ge asopọ agbara: Ensure the main power supply is switched off before beginning any installation work.
- Iṣagbesori: Select a suitable location for the transformer, ensuring it is dry, well-ventilated, and within the specified operating temperature range. The flat design allows for space-saving installation, including within furniture.
- Input Connection (PRI): Connect the AC mains supply (200-240V~, 50/60 Hz) to the input terminals labeled 'N' (Neutral) and 'L' (Live) on the transformer. Use appropriate wiring and ensure secure connections.
- Output Connection (SEC): Connect your 12V DC LED lighting system to the output terminals labeled '+' and '-' on the transformer. Ensure correct polarity (+ to + and - to -) for your LED devices. The transformer provides a constant 12V DC output suitable for parallel circuits.
- Load Check: Jẹrisi pe lapapọ wattage of all connected LED devices does not exceed 30 watts.
- Awọn isopọ to ni aabo: Double-check all wiring connections to ensure they are tight and correctly insulated.
- Agbara Tan: Nígbà tí gbogbo àwọn ìsopọ̀ bá ti wà ní ààbò tí a sì ti fìdí rẹ̀ múlẹ̀, dá agbára padà sí àyíká náà.
Nọmba 2: Goobay 30003 LED Transformer with dimensions. This image shows the transformer with its length (150 mm), width (45 mm), and height (17 mm) clearly indicated, alongside its weight (140 g).
5. Awọn ilana Iṣiṣẹ
The Goobay 30003 LED Transformer operates automatically once correctly installed and powered. It provides a stable 12V DC output for your connected LED devices.
- Ensure the total load of connected LEDs does not exceed 30W.
- The transformer is designed for continuous operation within its specified parameters.
6. Itọju
The Goobay 30003 LED Transformer requires minimal maintenance.
- Ninu: Disconnect power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Ayewo: Periodically check the wiring for any signs of damage or loose connections.
- Afẹfẹ: Ensure that ventilation openings are not obstructed.
7. Laasigbotitusita
If you encounter issues with your transformer, refer to the following table:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Awọn LED ko tan imọlẹ | Ko si ipese agbara Asopọmọra ti ko tọ Faulty LED(s) Idaabobo apọju ti mu ṣiṣẹ | Check mains power and circuit breaker. Verify input and output connections and polarity. Test LEDs with a known working power source. Reduce the total load; disconnect power, wait a few minutes, then reconnect. |
| Awọn LED flicker tabi baibai | Asopọ alaimuṣinṣin Insufficient power (near max load) Faulty LED(s) | Ṣayẹwo gbogbo awọn isopọ onirin. Ensure total load is well within the 30W limit. Test individual LEDs. |
| Transformer makes buzzing noise | Awọn paati alaimuṣinṣin Incompatible LED load (rare for constant voltage) Apọju | Ensure secure mounting. If noise persists and performance is affected, discontinue use. Verify total load is within specifications. |
| Transformer is hot | Afẹfẹ ti ko dara Apọju | Ensure adequate airflow around the unit. Do not cover. Reduce the total load of connected LEDs. |
If the problem persists after following these steps, disconnect the power and contact customer support or a qualified electrician.
8. Awọn pato
- Nọmba awoṣe: 30003
- Brand: Goobay
- Iṣagbewọle Voltage (Primary): 200-240V ~, 50/60 Hz
- O wujade Voltage (Secondary): 12V DC
- O pọju Ijade lọwọlọwọ: 2.5 Amps
- O pọju Apapọ fifuye: 30 Wattis
- Orisun Agbara: Electricity, Male Plug
- Kilasi Idaabobo: II (Safe electronic separation)
- Ijẹrisi: CE
- Iru fifi sori: Bodenmontage (Floor Mounting - typically refers to surface mounting)
- Awọn iwọn ọja: 1.77 x 0.67 x 5.91 inches (45 x 17 x 150 mm)
- Ìwúwo: Isunmọ 5.59 iwon (140 g)
- Operating Temperature (ta): 45 °C
- Case Temperature (tc): 85 °C
9. Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
