EUFAB APA 16540 Power Pack with Compressor and Jump Starter 12V - Instruction Manual

Ọrọ Iṣaaju

Thank you for choosing the EUFAB APA 16540 Power Pack. This versatile device combines a 12V jump starter, an air compressor, and a portable 12V power source, making it an essential tool for automotive, camping, and marine applications. This manual provides important information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference.

Awọn Itọsọna Aabo

ÌKÌLỌ̀: Àìtẹ̀lé àwọn ìlànà ààbò wọ̀nyí lè yọrí sí ìkọlù iná mànàmáná, iná, àti/tàbí ìpalára ńlá.

• Always wear eye protection and protective gloves when working with batteries.
• Do not smoke or allow sparks or flames in the vicinity of the battery or power pack. Batteries generate explosive gases.
• Ensure proper ventilation when charging or using the jump starter.
• Keep the device away from children and unauthorized persons.
• Do not expose the power pack to rain or wet conditions.
• Never short-circuit the jump starter clamps.
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of clean water and seek medical attention.
• Maṣe gbiyanju lati fo-bẹrẹ batiri tio tutunini.
• Rí i dájú pé iná ọkọ̀ náà ti pa kí o tó so olùbẹ̀rẹ̀ fífò náà pọ̀.
• Do not use the compressor for more than 10 minutes continuously to prevent overheating. Allow it to cool down before further use.

Ọja Pariview

The EUFAB APA 16540 Power Pack is designed for portability and multi-functionality. It features a robust casing with an integrated carrying handle, making it easy to transport.

olusin 1: Iwaju view of the EUFAB APA 16540 Power Pack, showing the integrated compressor with pressure gauge and the main power switch.

Awọn eroja:

• Jump Start Cables: Pupa (+) ati Dudu (-) clamps for vehicle battery connection.
• Igbese afẹfẹ: Integrated compressor with a hose and various adapters for inflation.
• Iwọn titẹ: Displays current air pressure during inflation.
• Socket DC 12V: For powering 12V accessories.
• Imọlẹ iṣẹ LED: Pese itanna ni awọn ipo ina kekere.
• Atọka Ipele Batiri: LEDs to show the charge status of the internal battery.
• Awọn ibudo gbigba agbara: Input for 230V AC adapter and 12V DC car charger.
• Ọwọ́ gbígbé tí a ṣepọ: Fun irọrun gbigbe.

olusin 2: Top view of the Power Pack, highlighting the ON/OFF switch, LED work light, and battery level indicators.

Eto ati Gbigba agbara Ibẹrẹ

Before first use, fully charge the EUFAB APA 16540 Power Pack for at least 12-15 hours. Regular charging is crucial for maintaining battery life and performance.

Gbigba agbara Pack agbara:

1. Using the 230V AC Adapter:
   • Connect the 230V AC adapter to the charging port on the power pack.
   • Pulọọgi ohun ti nmu badọgba sinu iṣan ogiri boṣewa.
   • The charging indicator LED will illuminate (typically red during charging, turning green when fully charged).
   • Charge until the indicator shows full charge.
2. Using the 12V DC Car Charger:
   • Connect the 12V DC car charger to the charging port on the power pack.
   • Plug the other end into your vehicle's 12V cigarette lighter socket.
   • The charging indicator LED will illuminate.
   • Charge until the indicator shows full charge.

It is recommended to recharge the power pack every 2-3 months, even when not in use, to ensure optimal battery health.

Isẹ

1. Fo Bibẹrẹ Ọkọ

Use this function to start vehicles with a discharged 12V battery.

1. Rí i dájú pé iná ọkọ̀ náà ti pa, àti pé gbogbo àwọn ohun èlò míìrán (ìmọ́lẹ̀, rédíò, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ) ni a ti pa.
2. Sopọ awọn pupa (+) jump start clamp si awọn rere (+) terminal of the vehicle's discharged battery.
3. Sopọ awọn dudu (-) jump start clamp to a clean, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do NOT connect to the negative (-) battery terminal directly.
4. Rii daju pe gbogbo awọn asopọ wa ni aabo.
5. Turn on the power pack's jump start function (if applicable, refer to specific switch on your model).
6. Attempt to start the vehicle. If it doesn't start after 5-6 seconds, wait at least 3 minutes before trying again.
7. Ni kete ti ọkọ ba bẹrẹ, ge asopọ naa lẹsẹkẹsẹ dudu (-) clamp from the chassis, then disconnect the pupa (+) clamp lati batiri.
8. Turn off the power pack.

Figure 3: The Power Pack connected to a vehicle's battery terminals for jump-starting. Note the correct connection order for safety.

2. Lilo Air Compressor

The integrated compressor can inflate tires, sports equipment, and other inflatables.

1. Ensure the power pack is adequately charged.
2. Screw the compressor hose adapter onto the valve stem of the item to be inflated. For different items (e.g., bicycle tires, inflatable mattresses), use the appropriate adapter provided.
3. Check the pressure gauge for the current pressure.
4. Tan konpireso yipada.
5. Monitor the pressure gauge closely. Once the desired pressure is reached, turn off the compressor switch.
6. Unscrew the hose adapter from the valve stem.

Pataki: Do not over-inflate. Refer to the manufacturer's recommended pressure for the item you are inflating. Do not operate the compressor for more than 10 minutes continuously. Allow a cooling period of at least 15 minutes between uses.

Figure 4: The Power Pack's compressor in use, inflating a car tire. The pressure gauge is visible for monitoring.

3. Using the 12V DC Power Socket

The 12V DC socket can power various 12V accessories (e.g., car vacuum cleaners, portable coolers) up to a maximum current draw.

1. Ensure the power pack is adequately charged.
2. Plug your 12V accessory into the 12V DC socket on the power pack.
3. Turn on the power pack's 12V output switch (if available).
4. When finished, turn off the output switch and unplug the accessory.

Akiyesi: The 12V socket is protected by an internal fuse. If an accessory does not work, check the accessory's power requirements and the power pack's charge level.

4. Lilo Imọlẹ Iṣẹ LED

The integrated LED light provides convenient illumination.

• Locate the switch for the LED light (refer to Figure 2).
• Toggle the switch to turn the light ON or OFF.

Itoju

Itọju Batiri:

• Recharge the power pack immediately after each use.
• If not in frequent use, recharge the power pack every 2-3 months to prevent deep discharge and prolong battery life.
• Do not store the power pack in extreme temperatures (hot or cold).

Ninu:

• Wipe the exterior of the power pack with a soft, damp asọ.
• Maṣe lo awọn kemikali lile tabi awọn afọmọ abrasive.
• Rí i dájú pé gbogbo èbúté àti àwọn ibi tí ó ṣí sílẹ̀ kò ní eruku àti ìdọ̀tí.

Ibi ipamọ:

• Store the power pack in a cool, dry place, away from direct sunlight and moisture.
• Keep the jump start clamps mọ ki o si free ti ipata.

Laasigbotitusita

Awọn pato

• Awoṣe: APA 16540
• Iru Batiri: Olori Acid
• Batiri Voltage: 12 V
• Agbara Batiri: 7 Ah (7000 mAh) / 10 Ah (10000 mAh) - Note: Discrepancy in source data, using both for clarity.
• Lọ Bẹrẹ Lọwọlọwọ: 250 A (o pọju 500 A)
• Compressor Pressure: Pẹpẹ 18 (260 PSI)
• 12V DC Socket Output: 1 x 12 V
• Iṣagbewọle gbigba agbara: 230V AC adapter or 12V DC car charger
• Awọn iwọn (L x W x H): Isunmọ 25.5 x 23 x 16.5 cm (10 x 9 x 6.5 inches)
• Ìwúwo: Isunmọ 3.8 kg (8.38 lbs)
• Awọn ẹya pataki: LED Light, Portable
• Awọn iwe-ẹri: CE

Atilẹyin ọja ati Support

The EUFAB APA 16540 Power Pack is designed for durability and performance. Spare parts availability is typically 1 year from the date of purchase.

For technical support, warranty claims, or questions not covered in this manual, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty purposes.

Manufacturer: APA

Orúkọ ìtajà: EUFAB