Ọrọ Iṣaaju
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Intermatic P1353ME 3-Circuit Pool/Spa Digital Time Switch. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.
The Intermatic P1353ME is designed for aftermarket retrofit applications, allowing for an upgrade to a digital control system without replacing the existing enclosure. It features 3 timed circuits for various pool and spa components, including filter pumps (up to 3 HP), 2-speed pumps, pool lights, landscape lights, fountain pumps, blowers, and cleaner pumps.
Alaye Aabo pataki
WARNING: Risk of Electrical Shock.
Always turn off power at the main panel before servicing this switch or the equipment it controls. Use 75°C copper conductors only. Reinstall the insulator after wiring.
This device must be installed by a qualified electrician in accordance with all local and national electrical codes.
Observe all safety precautions to prevent injury or damage to the equipment.
Ọja Pariview
The Intermatic P1353ME is a versatile digital time switch designed for precise control of pool and spa equipment. Key features include:
- Controls single- and two-speed pumps, along with cleaner/booster pumps.
- Three ON/OFF events per circuit per day for customizable scheduling.
- Seven preprogrammed modes for easy setup.
- Built-in freeze and heater protection.
- Olona-voltage input and output (120V or 208-240V).
- LCD display for clear monitoring.
- Memory back-up.
- Fireman switch capability.
Aworan: Iwaju view of the Intermatic P1353ME Digital Time Switch, showing the LCD display, control buttons (MODE, PROG, ENTER, UP/DOWN arrows), and ON/OFF buttons for Circuit 1, Circuit 2, and Circuit 3. A caution label regarding electrical shock and mode key usage is visible at the bottom.
Eto ati fifi sori
Atokọ iṣaju fifi sori ẹrọ:
- Ensure power is OFF at the main breaker.
- Verify existing enclosure compatibility (designed to snap into any Intermatic enclosure).
- Confirm required voltage (120V or 208-240V) matches the unit's capabilities.
- Kó àwọn irinṣẹ́ pàtàkì jọ: screwdriver, àwọn ohun èlò ìgé wáyà, voltage idanwo.
Awọn igbesẹ fifi sori ẹrọ:
- Ge asopọ agbara: Turn off power to the existing time switch at the main electrical panel. Verify power is off using a voltage idanwo.
- Remove Old Mechanism: Carefully remove the old mechanical time switch mechanism from the Intermatic enclosure.
- Install New Mechanism: Snap the P1353ME digital mechanism into the existing Intermatic enclosure. Ensure it is securely seated.
- Asopọmọra: Connect the electrical wiring according to the wiring diagram provided with the unit. Ensure all connections are tight and secure. Use 75°C copper conductors only.
- Reinstall Insulator: After wiring, reinstall any insulators or protective covers that were removed.
- Ti Àpótí Pa: Securely close the enclosure cover.
- Pada Agbara pada: Turn power back on at the main electrical panel.
For detailed wiring diagrams, refer to the official product documentation or consult a qualified electrician.
Awọn ilana Iṣiṣẹ
Initial Power-Up and Time Setting:
- Upon initial power-up, the LCD display will illuminate.
- Set the current time and date using the PROG, ENTER, and UP/DOWN arrow keys. Follow the on-screen prompts.
Programming Circuits:
The P1353ME allows for three ON/OFF events per circuit per day.
- Access Programming: Tẹ awọn PROG key to cycle through menu options.
- Lilọ kiri awọn Eto: Lo awọn UP ati SILE arrow keys to change program settings (e.g., ON/OFF times for each circuit).
- Confirm Changes: Tẹ awọn WOLE key to save changes and exit programming mode.
Isẹ afọwọṣe:
To manually turn devices ON or OFF:
- Tẹ igbẹhin TAN/PA buttons located below the LCD display for Circuit 1, Circuit 2, or Circuit 3.
Preprogrammed Modes:
The unit features seven preprogrammed modes for common applications. Consult the full user manual (PDF link provided in product details) for details on selecting and customizing these modes.
Itoju
The Intermatic P1353ME is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Ayewo Igbakọọkan: Lododun, maa ṣe ayẹwo ohun elo naa fun eyikeyi ami ibajẹ ara, asopọ ti o bajẹ, tabi ibajẹ.
- Ninu: Keep the exterior of the unit clean and free of dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Yiyipo Agbara: If the unit behaves unexpectedly, try cycling the power off and on at the main breaker for a few minutes.
- Batiri Afẹyinti: The unit includes memory back-up. While not user-serviceable, prolonged power outages may eventually deplete the internal battery. If settings are lost after a power outage, reprogram the unit.
CAUTION: Always disconnect power before performing any maintenance inside the enclosure.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan jẹ òfo. | Ko si agbara si ẹrọ naa. | Check main breaker. Ensure wiring connections are secure. |
| Unit does not turn ON/OFF at programmed times. | Incorrect programming; Time/date incorrect. | Verify programmed ON/OFF times. Check and correct current time/date. Ensure unit is not in manual override mode. |
| Equipment (pump, light) does not respond. | Faulty equipment; Wiring issue; Overload. | Check the equipment directly. Inspect wiring for loose connections. Check for tripped circuit breakers on the equipment's circuit. |
| Awọn eto ti sọnu lẹhin agbara outage. | Internal memory backup battery depleted. | Reprogram the unit. The internal battery is designed for long life but can eventually deplete. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support or a qualified electrician.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | P1353ME |
| Olupese | Intermatic |
| Iṣagbewọle Voltage | 120V tabi 208-240V |
| Awọn iyika | 3 timed circuits |
| Ibamu fifa | Single- and two-speed pumps up to 3 HP |
| ON/OFF Events | 3 per circuit per day |
| Idaabobo Awọn ẹya ara ẹrọ | Freeze and Heater Protection |
| Ifihan | Ikawe LCD |
| Iwọn Nkan | 1.55 iwon |
| Ọja Mefa | 1 x 1 x 1 inches |
| Ijẹrisi | CSA |
Alaye atilẹyin ọja
The Intermatic P1353ME is covered by a manufacturer's warranty. According to the product specifications, the warranty description is "Replace product". For specific terms, conditions, and duration of the warranty, please refer to the official warranty statement provided with your product or contact Intermatic customer support.
Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Atilẹyin ati Alaye olubasọrọ
For technical assistance, product inquiries, or warranty claims, please contact Intermatic customer support:
- Olupese: Intermatic
- Webojula: www.intermatic.com (Please note: This is a general placeholder, actual support link may vary. Refer to product packaging or official website for precise contact details.)
- Iwe afọwọkọ olumulo osise (PDF): Ṣe igbasilẹ PDF
When contacting support, please have your product model number (P1353ME) and purchase date available.
