Ọrọ Iṣaaju
The STI 6405 Exit Stopper is a highly effective multi-function door alarm designed to deter unauthorized exits and entries through emergency doors. This device provides an immediate, loud alarm when activated, drawing attention to the door. It features a momentary reset option for convenience. This manual provides detailed instructions for the installation, operation, and maintenance of your STI 6405 Exit Stopper.
Alaye Aabo
IKILO:
- Ensure proper installation to prevent false alarms or system failure.
- The alarm produces a loud sound (105 dB). Avoid prolonged exposure to prevent hearing damage.
- This device is intended as a deterrent and an alert system. It does not replace proper security measures or emergency protocols.
- Do not attempt to modify or repair the unit. Refer all servicing to qualified personnel.
Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn nkan wa ninu package:
- STI 6405 Exit Stopper Multi-Function Door Alarm Unit
- Ohun elo iṣagbesori (awọn skru, awọn ìdákọró)
- Two (2) Reset Keys
- Ilana Afowoyi (iwe yii)
This image displays the red octagonal STI 6405 Exit Stopper Multi-Function Door Alarm. The top face of the alarm has 'STOP' and 'ALARM WILL SOUND' printed in white. Below this, there's a speaker grille and two speaker icons indicating sound output. At the bottom, a keyhole for resetting the alarm is visible, labeled 'RESET'. Two silver keys are shown next to the alarm.
Eto ati fifi sori
Yiyan Ibi:
Install the alarm on or near the door frame of the emergency exit. Ensure it is easily visible and accessible for authorized personnel, but difficult for unauthorized individuals to tamper pẹlu.
Gbigbe Ẹka naa:
- Position the alarm unit on the desired surface.
- Mark the locations for the mounting screws through the designated holes on the unit's backplate.
- Drill pilot holes if necessary, using an appropriate drill bit for your wall material.
- Secure the alarm unit to the surface using the provided mounting screws. Ensure it is firmly attached and does not wobble.
Agbara Ẹka naa:
The STI 6405 operates on a 9-volt battery (not included). Open the battery compartment (usually on the back or side of the unit) and insert a fresh 9V alkaline battery, observing the correct polarity. Close the compartment securely.
Awọn ilana Iṣiṣẹ
Gbigbe Itaniji naa:
The alarm is typically armed automatically when the door it monitors is closed and the unit is powered. Some models may have an arming switch; refer to the specific markings on your unit.
Gbigbe itaniji:
When the monitored door is opened, the alarm will sound immediately at 105 dB. The message "ALARM WILL SOUND" on the unit serves as a visual warning.
Atunto Itaniji:
To silence and reset the alarm, insert one of the provided keys into the keyhole labeled "RESET" on the front of the unit. Turn the key to the reset position (usually clockwise) and hold it momentarily until the alarm stops. Return the key to the original position and remove it. The alarm will re-arm once the door is closed.
Itoju
Rirọpo Batiri:
Replace the 9-volt battery annually or when the low battery indicator (if present) illuminates, or if the alarm sound becomes weak. Always use a fresh, high-quality 9V alkaline battery.
Ninu:
Wipe the unit periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing tabi ti abẹnu irinše.
Idanwo:
Regularly test the alarm (e.g., monthly) by briefly opening the monitored door to ensure it functions correctly. Reset the alarm immediately after testing.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Alarm does not sound when door opens. | Dead or low battery. Unit not properly armed. Sensor misalignment. | Replace battery. Check arming switch/status. Verify sensor alignment with door. |
| Alarm sounds weakly. | Batiri kekere. | Rọpo batiri. |
| Alarm cannot be reset. | Key not fully inserted or turned. Internal malfunction. | Ensure key is fully inserted and turned to the reset position. If issue persists, contact support. |
| Àwọn ìkìlọ̀ èké. | Loose mounting. Vibration. Sensor interference. | Ensure unit is securely mounted. Check for sources of vibration. Inspect sensor area for obstructions. |
Awọn pato
- Awoṣe: Sti-6405
- Olupese: SAFETY TECHNOLOGY STI
- Orisun Agbara: 9 Volts (9V battery, not included)
- Ipele Ohun: 105 dB (at 1 meter)
- Awọn iwọn: Isunmọ 15.24 x 12.7 x 5.08 cm (6 x 5 x 2 inches)
- Ìwúwo: Isunmọ 454 g (1 lb)
- Awọn ẹya: Multi-function, Momentary Reset Option
Atilẹyin ọja ati Support
For warranty information or technical support, please contact your authorized STI dealer or visit the official SAFETY TECHNOLOGY STI webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Olupese: SAFETY TECHNOLOGY STI
Webojula: www.sti-usa.com (Eksample ọna asopọ, ọna asopọ gangan le yatọ)
