1. Ifihan
This manual provides instructions for the safe and effective use of your ANEX Ultra Low Profile Offset Ratcheting Screwdriver and Hex Wrench, Model No.429. Designed for accessing fasteners in confined spaces, this tool combines a compact form factor with a versatile bit set.
2. Ọja Ipariview
The ANEX No.429 is a specialized hand tool featuring an ultra-low profile, offset design, and a ratcheting mechanism. Its primary function is to facilitate tightening and loosening screws and hex fasteners in areas where traditional screwdrivers or wrenches cannot reach. The tool includes a set of 9 magnetic bits for various applications.
Image 2.1: ANEX Ultra Low Profile Offset Ratcheting Screwdriver with included 9 bits.
Awọn Bits to wa:
- Phillips: +1, +2, +3 mm
- Flathead: -6 mm
- Hex: 2.5, 3, 4, 5, 6 mm
3. Awọn irinše
The tool consists of a flat, ergonomic handle, a ratcheting head with a bit holder, and a direction switch. The bit holder is magnetic to secure bits during use and replacement.
Aworan 3.1: Isunmọ view of the ratcheting head and bit holder.
4. Eto
To install a bit, select the appropriate bit from the included set. Insert the bit into the magnetic bit holder on the ratcheting head. The magnet will secure the bit in place. To remove, simply pull the bit out.
Image 4.1: Demonstrating the magnetic bit insertion into the tool's head.
5. Awọn ilana Iṣiṣẹ
5.1. Ratcheting Mechanism
The ratcheting mechanism allows for continuous turning of a fastener without repositioning the tool. A small switch on the ratcheting head controls the direction: forward for tightening, reverse for loosening. Position the switch to the desired direction before use.
5.2. Accessing Tight Spaces
The offset and upwards-angled head design enables access to fasteners in very confined areas. The flat handle allows for firm grip and application of pressure, which is crucial for breaking loose or securely tightening fasteners.
Image 5.1: The screwdriver in use, demonstrating its ability to reach fasteners in confined areas.
Image 5.2: Diagram showing the correct method for applying pressure to the tool.
6. Itọju
Keep the tool clean and free from debris. Wipe down the handle and metal parts with a dry cloth after each use. Store the tool and bits in a dry environment to prevent corrosion. Do not use abrasive cleaners or solvents.
7. Laasigbotitusita
7.1. Bit Not Holding
Ensure the bit is fully inserted into the magnetic holder. If the magnet appears weak, clean the bit holder and bit shank to remove any metallic dust or debris.
7.2. Ratcheting Mechanism Stiff or Not Engaging
Inspect the ratcheting head for any obstructions. A small amount of light machine oil can be applied to the mechanism if it feels stiff, but avoid over-lubrication.
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Lapapọ Gigun | 4.25 inches (108 mm) |
| Sisanra | 0.82 inches (21 mm) |
| Iwọn Ara | 2.18 oz (0.1 kg / 3.52 ounces) |
| Mu Ohun elo | Irin |
| Bits Material | Carbon tool steel |
| Ori Style | Hex (for bits) |
| Ipo Isẹ | Ẹ̀rọ |
| Awọn Bits to wa | Phillips (+1, +2, +3 mm), Flathead (-6 mm), Hex (2.5, 3, 4, 5, 6 mm) |
Image 8.1: Dimensional diagram of the ANEX Ultra Low Profile Offset Ratcheting Screwdriver.
9. Atilẹyin ọja ati Support
This ANEX tool is manufactured in Japan, reflecting high-quality craftsmanship. For product support or inquiries, please refer to the retailer or manufacturer's official contact channels.
