The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 Tester for the Air User Manual
Model: GOX 100 (Part Number: 600437)
1. Ifihan
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Alaye Aabo
- Read this manual thoroughly before operating the device.
- Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, imọlẹ orun taara, tabi ọrinrin pupọ.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Keep the device and its components out of reach of children.
- Sọ awọn batiri ati ẹrọ naa sọnu ni ibamu si awọn ilana agbegbe.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Itọsọna olumulo
- 9V Block Battery (may not be included, check packaging)
4. Eto
4.1 Fifi sori batiri
- Wa yara batiri ni ẹhin ẹrọ naa.
- Ṣii ideri iyẹwu batiri naa.
- Insert a 9V block battery, ensuring correct polarity.
- Pa ideri batiri naa ni aabo.
4.2 Sensọ Asopọ
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Awọn ilana Iṣiṣẹ
5.1 Titan / Pa a
- Lati fi agbara sori ẹrọ, tẹ bọtini naa tan/pa bọtini. Ifihan naa yoo tan imọlẹ.
- Lati fi agbara si pipa ẹrọ naa, tẹ mọlẹ tan/pa bọtini titi ti ifihan yoo wa ni pipa.
5.2 Gbigba Idiwon
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- Tẹ awọn mode button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Iṣatunṣe
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- Tẹ mọlẹ cal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Itọju
7.1 Sensọ Rirọpo
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Pa ẹrọ naa kuro.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Perform a calibration as described in Section 6.
7.2 Ninu
- Nu ẹrọ naa casing pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8. Laasigbotitusita
| Isoro | Owun to le Fa / Solusan |
|---|---|
| Ẹrọ naa ko ṣiṣẹ | Check battery installation and charge. Replace battery if necessary. |
| Awọn kika ti ko pe | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Imọ ni pato
| Paramita | Iye |
|---|---|
| Iwọn Iwọn | 0 - 100 % Oxygen |
| Ipinnu | 0.1% |
| Yiye wiwọn | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Ibi ti ina elekitiriki ti nwa | 9V batiri Àkọsílẹ |
| Iru Idaabobo | IP65 |
| Awọn iwọn (H x W) | 106 mm x 67 mm |
| Iwọn | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Thermal Compensation | Laifọwọyi |
10. Atilẹyin ọja ati Support
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER webojula.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe ọja rẹ.
