1. Ifihan
This manual provides instructions for the installation, operation, and maintenance of the Broan-NuTone S97017706 Ventilation Fan Motor Assembly. This genuine replacement part is designed to restore the functionality of compatible Broan-NuTone ventilation fans, ensuring efficient air movement and quiet operation in your bathroom or other designated areas.
2. Alaye Aabo
IKILO: Lati dinku eewu ina, mọnamọna, tabi ipalara si eniyan, ṣe akiyesi atẹle naa:
- Always disconnect power at the service panel before installing or servicing this unit. Lock out the service panel to prevent power from being turned on accidentally.
- Iṣẹ fifi sori ẹrọ ati onirin itanna gbọdọ ṣee ṣe nipasẹ eniyan ti o peye ni ibamu pẹlu gbogbo awọn koodu ati awọn iṣedede to wulo, pẹlu awọn koodu ikole ti ina ati awọn iṣedede.
- Lo ẹyọkan yii nikan ni ọna ti a pinnu nipasẹ olupese. Ti o ba ni awọn ibeere, kan si olupese.
- This motor assembly is UL listed for use in tub/shower with GFI branch circuit wiring. Ensure your existing setup complies with these requirements.
- Ma ṣe lo ọja yii pẹlu eyikeyi ẹrọ iṣakoso iyara ipinle to lagbara.
3. Package Awọn akoonu
The Broan-NuTone S97017706 package includes:
- 1 x Broan-NuTone S97017706 Motor Assembly (includes motor and blower wheel)
Image: The Broan-NuTone S97017706 Ventilation Fan Motor Assembly, showing the motor and attached blower wheel.
4. Awọn pato
| Nọmba awoṣe | S97017706 |
| Ọja Mefa | 9"L x 6"W x 9"H |
| Voltage | 120 Volts |
| Wattage | 144 watt |
| Ọna Itutu | Fan-based |
| Ariwo Ipele | 5 Awọn ọmọ |
| Iyara Yiyipo ti o pọju | 1550 RPM |
| Air Sisan Agbara | Ẹsẹ onigun 100 fun Iṣẹju kan (CFM) |
| Iwọn Nkan | 3 iwon |
| Ijẹrisi | UL Akojọ |
5. Ibamu
This S97017706 Motor Assembly is compatible with the following NuTone/Broan ventilation fan models:
- NuTone 8814R
- NuTone 8664RP
- NuTone 8673
Always verify your existing fan's model number before purchasing láti rí i dájú pé ó báramu àti iṣẹ́ rẹ̀ mu.
6. Awọn ilana fifi sori ẹrọ
This section outlines the general steps for replacing your ventilation fan motor assembly. Specific fan models may have slight variations.
- Ge Agbara: Before beginning any work, turn off the power to the ventilation fan at your home's circuit breaker or fuse box. Verify power is off using a voltage idanwo.
- Remove Fan Cover and Light Fixture: Carefully remove the decorative fan cover and any light fixture components (bulb, lens) to expose the fan housing and motor assembly.
- Locate and Remove Old Motor Assembly: The existing motor assembly is typically secured by one or more screws and may have flanges that fit into slots. Identify the securing screw(s) and remove them. Gently disconnect the electrical plug from the receptacle within the fan housing.
- Fi Àkójọpọ̀ Ẹ̀rọ Tuntun Sílẹ̀:
- Connect the electrical plug of the new S97017706 motor assembly into the receptacle in the fan housing. Ensure a secure connection.
- Align the new motor assembly with the mounting slots and screw holes in the fan housing.
- Secure the assembly with the screw(s) removed in step 3. Ensure the assembly is firmly seated.
- Reinstall Fan Cover and Light Fixture: Reattach the light fixture components and the decorative fan cover.
- Pada Agbara pada: Turn the power back on at the circuit breaker or fuse box. Test the fan for proper operation.
If you encounter difficulties or are unsure about any step, consult a qualified electrician.
7. Awọn ilana Iṣiṣẹ
Once installed, the Broan-NuTone S97017706 Motor Assembly operates as part of your ventilation fan system. Activate the fan using its wall switch or integrated control. The fan, with this motor assembly, is designed to provide 100 Cubic Feet Per Minute (CFM) of airflow, effectively ventilating areas up to 95 square feet.
For optimal performance, operate the fan during and after activities that generate moisture or odors, such as showering or cooking, to maintain good indoor air quality.
8. Itọju
Regular maintenance helps ensure the longevity and efficient operation of your ventilation fan.
- Ge Agbara: Always turn off power at the service panel before cleaning.
- Clean Fan Cover: Remove the fan cover and wash it with mild soap and water. Rinse thoroughly and dry completely before reinstalling.
- Clean Blower Wheel: Gently wipe the blower wheel and motor housing with a damp cloth to remove dust and debris. Avoid getting moisture into the motor windings. A vacuum cleaner with a brush attachment can also be used.
- Ṣayẹwo fun ibajẹ: Periodically check the motor assembly and wiring for any signs of wear or damage.
- Reassemble and Restore Power: Reinstall all components and restore power.
Perform cleaning at least once a year, or more frequently in dusty environments.
9. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Fan ko ni tan-an. | No power to the fan; faulty switch; loose wiring connection; motor failure. | Check circuit breaker/fuse. Ensure switch is functional. Verify all electrical connections are secure. If motor is new and still not working, contact support. |
| Afẹ́fẹ́ náà ń pariwo púpọ̀. | Loose mounting screw; debris in blower wheel; worn motor bearings (if old motor). | Ensure motor assembly is securely mounted. Clean blower wheel of any obstructions. If noise persists with a new motor, ensure it is correctly installed and not vibrating against the housing. |
| Afẹfẹ ti o dinku. | Clogged fan cover or blower wheel; obstructed ductwork. | Clean fan cover and blower wheel. Inspect ductwork for blockages (requires access to attic/ceiling space). |
10. Atilẹyin ọja ati Support
This is a genuine Broan-NuTone replacement part. For specific warranty information and technical support, please refer to the official Broan-NuTone webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Broan-NuTone Official Webojula: www.broan-nutone.com
