Ọja Pariview
This manual provides essential information for the safe and effective use of your GE Soft White Light Bulbs. These incandescent bulbs are designed to provide warm, pleasing everyday light without harsh glares and shadows, ideal for various indoor lighting applications.
Figure 1: GE Soft White Light Bulb (A19 shape, medium base).
Each bulb uses 25 watts, produces 210 lumens, and has a 2500K soft white light appearance. They are suitable for use in table lamps and enclosed fixtures.
Alaye Aabo
Always read and follow all safety instructions before installing or using the light bulbs.
- Ensure power is turned off at the switch or circuit breaker before installation or removal.
- Do not use with dimmers unless explicitly stated as compatible. These bulbs are non-dimmable.
- Maṣe kọja wat ti o pọjutage Rating ti imuduro.
- Yẹra fún fífi ọwọ́ kan bulọọbu náà nígbà tí a bá ń ṣiṣẹ́ tàbí lẹ́sẹ̀kẹsẹ̀ lẹ́yìn tí a bá ti pa á, nítorí pé ó lè gbóná.
- Fun lilo inu ile nikan.
- Jeki kuro ni arọwọto awọn ọmọde.
Eto ati fifi sori
- Agbara Pa: Before beginning, ensure the power to the light fixture is completely turned off at the wall switch and, if necessary, at the circuit breaker.
- Yọ Bulb atijọ kuro (ti o ba wulo): Carefully unscrew the old light bulb from the socket by turning it counter-clockwise.
- Fi Bọlubu Tuntun sii: Gently screw the GE Soft White Light Bulb into the empty socket by turning it clockwise until it is snug. Do not overtighten.
- Pada Agbara pada: Turn the power back on at the wall switch and circuit breaker.
- Idanwo: Verify that the new bulb illuminates correctly.
Figure 2: Bulb dimensions for proper fit (approximately 4.5 inches / 11 cm in height).
Awọn ilana Iṣiṣẹ
These light bulbs operate like standard incandescent bulbs. Simply use the wall switch or fixture switch to turn the light on or off. No special operating procedures are required.
- Lilo ti a pinnu: Designed for general purpose lighting in residential and commercial settings.
- Awọn ọna Voltage: 120 Volts.
- Iwọn Iṣiṣẹ: Suitable for typical indoor ambient temperatures.
Itoju
GE Soft White Light Bulbs require minimal maintenance.
- Ninu: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners.
- Rọpo: Replace the bulb when it burns out. Follow the installation steps outlined above.
- Idasonu: Dispose of used incandescent bulbs according to local regulations.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Boolubu ko ni tan imọlẹ. |
|
|
| Boolubu flickers. |
|
|
Awọn pato
- Brand: Imọlẹ GE
- Nọmba awoṣe: 570613
- Irú Imọlẹ: Ohu
- Wattage: 25 Wattis
- Imọlẹ: 210 Lumens
- Iwọn awọ: 2500 Kelvin (Asọ funfun)
- Iwon Apẹrẹ Boolubu: A19
- Ipilẹ Bulbu: E26 Alabọde
- Voltage: 120 Volts
- Apapọ Igbesi aye: 2500 Hours (based on 3 hours per day usage)
- Awọn iwọn ọja: Approximately 4"W x 3"H (refer to Figure 2 for detailed height)
- Ìwọ̀n Nkan: 2.39 iwon
- Ilu isenbale: China
Alaye atilẹyin ọja
This product comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact GE Lighting customer support. The estimated yearly energy cost is $3.01 based on 3 hours per day at $0.11 per kWh, and the bulb lasts approximately 2.3 years based on 3 hours per day usage.
Atilẹyin
For further assistance or inquiries, please visit the official GE Lighting website or contact their customer service department. You can often find support resources, FAQs, and contact information on the manufacturer's webojula.
GE Lighting Official Webojula: www.gelighting.com
