1. Ifihan
The Intermatic EI400C Electronic Countdown In-Wall Timer is designed to provide automatic shut-off functionality for various electrical loads, including indoor and outdoor lighting, bathroom fans, whole house fans, and other appliances. This timer offers precise control from 1 second to 24 hours, enhancing convenience and energy efficiency in your home or office. Its silent operation and simple push-button interface make it user-friendly, while its no-neutral wire requirement simplifies installation in most standard wall boxes.
2. Alaye Aabo pataki
WARNING: Risk of Electric Shock. Improper installation can lead to serious injury or death.
- Always turn off power at the circuit breaker or fuse box before installing or servicing the timer.
- Fifi sori yẹ ki o ṣe nipasẹ oṣiṣẹ ina mọnamọna tabi ni ibamu pẹlu gbogbo awọn koodu itanna agbegbe ati ti orilẹ-ede.
- Do not use this timer with sunlamps, saunas, or any loads that could cause personal injury if timed incorrectly or if the timer malfunctions.
- Rii daju pe gbogbo awọn asopọ waya wa ni aabo ati idabobo daradara.
- Ẹrọ yii jẹ ipinnu fun lilo inu ile nikan.
3. Ọja Ipariview
The Intermatic EI400C is an electronic countdown timer designed for in-wall installation. It features a digital display and intuitive controls for setting countdown durations.
3.1 irinše
- Ifihan Digital: Shows current time and countdown status.
- Bọtini Tan/Pa: Activates or deactivates the timer.
- Plus (+) / Iyokuro (-) Awọn bọtini: Adjust countdown duration.
- Bọtini idaduro: Temporarily stops the countdown.
- Abala Batiri: Batiri lithium CR2 ni o wa ninu rẹ.
3.2 ọja Images
4. Eto ati fifi sori
The Intermatic EI400C timer is designed for easy installation, compatible with single-pole or 3-way switch configurations and does not require a neutral wire connection.
4.1 Pre-Fifi Igbesẹ
- Pa Agbara: Locate the circuit breaker or fuse that controls the switch you are replacing and turn off the power. Verify power is off using a voltage idanwo.
- Yọ Yipada to wa kuro: Fi pẹ̀lẹ́pẹ̀lẹ́ yọ àwo ògiri náà kúrò kí o sì tú switch tó wà tẹ́lẹ̀ kúrò nínú àpótí ògiri. Jà àwọn wáyà náà kúrò nínú switch àtijọ́.
4.2 Awọn itọnisọna Wiring
The EI400C timer is compatible with both single-pole and 3-way switch setups. Refer to the diagram provided with your product for specific wiring configurations. Generally, the timer will have two load wires and a ground wire. For 3-way applications, one of the traveler wires from the existing 3-way switch will be connected to the timer.
- Connect the timer's wires to the corresponding house wires using wire nuts.
- Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
- The EI400C does not require a neutral wire, simplifying installation in older homes.
4.3 Mounting and Finalizing Installation
- Carefully push the wired timer into the wall box.
- Secure the timer to the wall box with the provided screws.
- Attach the decorative wall plate.
- Pada Agbara pada: Tan agbara pada si ẹrọ fifọ.
4.4 Fifi sori batiri
The timer comes with a replaceable CR2 lithium battery, which powers the internal clock and settings memory. The battery is typically pre-installed or needs to be inserted upon initial setup.
- Open the small front cover of the timer to access the battery compartment.
- Insert the CR2 lithium battery, observing the correct polarity.
- Pa ideri batiri naa ni aabo.
5. Awọn ilana Iṣiṣẹ
The EI400C timer offers simple, push-button operation for setting countdown durations from 1 second to 24 hours.
5.1 Setting a Countdown Time
- Awọn iṣakoso Iwọle: Gently open the front cover of the timer to reveal the control buttons.
- Ṣatunṣe Akoko: Lo awọn + ati - buttons to set the desired countdown duration. The display will show the selected time.
- Aago Ibẹrẹ: Tẹ awọn Tan/Pa a button to activate the timer. The connected load will turn on, and the timer will begin counting down.
5.2 Turning Off Before Countdown Ends
If you wish to turn off the connected load before the set countdown time expires, simply press the Tan/Pa a button again. This will immediately turn off the load and reset the timer.
5.3 Iṣẹ idaduro
Tẹ awọn Sinmi button to temporarily halt the countdown. The connected load will remain on. Press Sinmi lẹẹkansi lati tun bẹrẹ kika naa.
5.4 Lockable Settings
The timer features lockable settings to prevent unintended changes to the program. Refer to the detailed instructions included in the product packaging for how to activate and deactivate this feature.
5.5 Visual/Audible Warnings
The EI400C can be configured to provide a visual or audible warning before the timer turns off. Consult the full product manual for steps on enabling and customizing these warning options.
5.6 fidio itọnisọna
Fidio 1: An official Intermatic video providing an overview of their in-wall timers, including the EI400 series. This video demonstrates general features and benefits of Intermatic in-wall timers, which are applicable to the EI400C model.
6. Itọju
The Intermatic EI400C timer requires minimal maintenance, primarily focusing on battery replacement.
6.1 Batiri Rirọpo
The internal CR2 lithium battery provides power for the timer's memory and display, typically lasting up to three years. When the battery is low, a 'LoBatt' indicator may appear on the display.
- Open the front cover of the timer.
- Carefully remove the old CR2 battery from its compartment.
- Insert a new CR2 lithium battery, ensuring correct polarity.
- Pa ideri iwaju ni aabo.
Akiyesi: Some users have reported that the battery compartment cover can be difficult to open or may not stay securely closed after multiple battery changes. Exercise care when opening and closing the compartment. If the cover does not stay closed, ensure the battery makes proper contact.
7. Laasigbotitusita
This section addresses common issues you might encounter with your Intermatic EI400C timer.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Timer display is blank or shows 'LoBatt' | Low or dead CR2 battery, or poor battery contact. | Replace the CR2 lithium battery. Ensure the battery is inserted correctly and the compartment cover is securely closed to maintain contact. |
| Timer shows 'NoOP' error | Indicates a problem with battery contact or internal operation. | Check and re-seat the CR2 battery. If the issue persists, the unit may require replacement. |
| Connected load does not turn on/off | No power to the timer, incorrect wiring, or faulty load. | Verify power at the circuit breaker. Double-check wiring connections according to the installation instructions. Test the connected load (e.g., light bulb) with a different switch or power source. |
| Difficulty opening battery compartment cover | Tight fit or worn plastic tabs. | Use a small, flat-head screwdriver to gently pry open the cover. Be careful not to damage the plastic tabs. |
| Timer does not hold settings after power outage | Dead or missing CR2 battery. | The CR2 battery maintains settings during power outages. Ensure it is installed and functional. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | EI400C |
| Brand | Intermatic |
| Àwọ̀ | Eyo |
| Ohun elo | Ṣiṣu |
| Voltage | 120-277 VAC |
| O pọju fifuye | 20 Amps |
| Ibiti Aago | 1 Second to 24 Hours |
| Yipada Iru | Single-pole or 3-way |
| Iṣagbesori Iru | Standard Wall Box, Rectangular Decorator Wall Plate |
| Batiri ti a beere | 1 CR2 Lithium (included) |
| Igbesi aye batiri | Titi di ọdun 3 |
| Awọn iwọn | 4.13 x 1.75 x 1.2 inches |
| Iwọn Nkan | 6 iwon (0.38 iwon) |
| Ijẹrisi | CSA Ifọwọsi |
| UPC | 078275101371 |
9. Atilẹyin ọja & Atilẹyin
9.1 atilẹyin ọja Alaye
The Intermatic EI400C Electronic Countdown In-Wall Timer comes with a 5-odun lopin atilẹyin ọja. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
9.2 Onibara Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic webAaye tabi apoti ọja fun alaye olubasọrọ tuntun julọ.
Awọn orisun Ayelujara: Ṣabẹwo si Intermatic Store on Amazon fun afikun ọja alaye ati oro.
