1. Ifihan
The VOLTCRAFT VC-32 Rotary Field Tester is a specialized instrument designed for determining and verifying the phase sequence in three-phase electrical networks. This device provides a clear, simultaneous display of existing phases and indicates the direction of the rotary field. Its robust design ensures reliable contact through 4 mm spring-loaded plugs, making it an essential tool for electricians and technicians working with three-phase systems.
2. Alaye Aabo
IKILO: Always observe general electrical safety regulations and local accident prevention rules when working with electrical installations. Failure to do so can result in serious injury or death.
- This device is rated for CAT III 400 V. Do not use it on circuits exceeding these voltage limits or in environments not suitable for CAT III measurements.
- Before each use, inspect the tester and its leads for any signs of damage. Do not use if damaged.
- Ensure proper insulation and secure connections when attaching the test leads to the circuit.
- Never touch the metal parts of the test probes when connected to a live circuit.
- Lo ohun elo aabo ti ara ẹni ti o yẹ (PPE) gẹgẹbi awọn ibọwọ idabo ati awọn gilaasi ailewu.
- The device is designed for professional use. If you are not qualified, do not attempt to use this tester.
3. Ọja Ipariview
The VOLTCRAFT VC-32 Rotary Field Tester is a compact and durable device. It features three integrated test leads, each terminated with a 4 mm spring-loaded plug, designed for secure and reliable connection to electrical terminals.
Figure 3.1: The VOLTCRAFT VC-32 Rotary Field Tester with its three test leads and protective caps. The device is black and grey, with blue, red, and black test leads.
3.1 irinše
- Tester Unit: The main body of the device, housing the indicators.
- Awọn itọsọna Idanwo: Three permanently attached leads (typically blue, red, black) with 4 mm spring-loaded plugs.
- Awọn itọkasi LED: Lights on the front panel to show phase presence (L1, L2, L3) and rotary field direction (clockwise/counter-clockwise).
olusin 3.2: Isunmọ view of the VC-32's front panel, highlighting the LED indicators for phase presence and rotation direction.
4. Eto
The VOLTCRAFT VC-32 is a passive device and does not require batteries for operation. It draws power directly from the circuit being tested.
4.1 Nsopọ Awọn itọsọna Igbeyewo
- Ensure the circuit to be tested is within the device's specified voltage range (CAT III 400 V).
- Carefully connect the three test leads to the respective phases (L1, L2, L3) of the three-phase electrical network. The leads are typically color-coded for easier identification, though specific phase assignments should always be verified according to local standards.
- Ensure that the spring-loaded plugs make firm and reliable contact with the terminals.
5. Awọn ilana Iṣiṣẹ
Once the test leads are securely connected to the three-phase circuit, the VC-32 will automatically begin its measurement.
Figure 5.1: User connecting the VC-32 to a three-phase electrical socket for testing.
5.1 Ìtumọ̀ Àwọn Èsì
- Phase Presence: The LEDs labeled L1, L2, and L3 will illuminate if the corresponding phases are present and within the operational voltage range. If an LED does not light up, it indicates a missing or insufficient voltage lori ipele yẹn.
- Rotary Field Direction: The device features two additional LEDs, typically indicating clockwise (right arrow) or counter-clockwise (left arrow) rotation. Only one of these LEDs should illuminate to indicate the detected phase sequence.
- Yiyi to tọ: If the desired rotation direction LED illuminates, the phase sequence is correct.
- Incorrect Rotation: If the undesired rotation direction LED illuminates, the phase sequence is incorrect. To correct this, swap any two of the phase connections (e.g., L1 and L2) at the source or load, then re-test.
6. Itọju
The VOLTCRAFT VC-32 Rotary Field Tester requires minimal maintenance to ensure its longevity and accuracy.
- Ninu: Clean the device and test leads with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.
- Ibi ipamọ: Store the tester in a dry, dust-free environment, away from direct sunlight and extreme temperatures. Keep the protective caps on the test probes when not in use.
- Ayewo: Regularly inspect the test leads and the device casing for any physical damage, cuts, or cracks. Damaged equipment must be taken out of service immediately and repaired by qualified personnel or replaced.
7. Laasigbotitusita
If you encounter issues with your VC-32 Rotary Field Tester, refer to the following common troubleshooting steps:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No LEDs illuminate. | Ko si voltage present on any phase, or poor connection. | Verify the power supply to the circuit. Check all test lead connections for secure contact. |
| Only one or two phase LEDs (L1, L2, L3) illuminate. | Missing phase(s) or insufficient voltage on specific phase(s). | Check the integrity of the circuit and the power supply for the non-illuminated phases. Ensure test leads are correctly connected. |
| No rotary field direction LED illuminates, but phase LEDs are on. | Unstable phase conditions or specific fault. | Re-check all connections. If the problem persists, consult a qualified electrician. |
8. Awọn pato
Technical specifications for the VOLTCRAFT VC-32 Rotary Field Tester:
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | IWULO |
| Nọmba awoṣe | VC-32 |
| Ẹka wiwọn | CAT III 400 V |
| Iwọn Išẹ ti o kere ju Voltage | 400 Volts |
| O pọju Ṣiṣẹ Voltage | 400 Volts |
| Iwọn otutu ti a fun ni oke | Awọn iwọn Celsius 40 |
| Iṣe akọkọ | Rotary Field and Phase Sequence Testing |
| Awọn iwọn Ọja (L x W x H) | 10.5 x 7.1 x 3.1 cm |
| Iwọn Ọja | 9.07 giramu |
| Àwọ̀ | Dudu ati Grey |
| Orisun agbara | Self-powered (draws power from circuit) |
9. Atilẹyin ọja ati Support
VOLTCRAFT products are known for their solid manufacturing and innovative technology. This product comes with a 1-odun wiwa fun apoju awọn ẹya ara.
For technical support, service, or warranty claims, please contact your VOLTCRAFT retailer or visit the official VOLTCRAFT website for further assistance. Ensure you have your product model number (VC-32) and purchase information available when seeking support.
