1. Ifihan
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ELRO VD60/BYRVD62 2-Family Video Door Intercom System. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Awọn ilana aabo
- Rí i dájú pé gbogbo ìsopọ̀ iná mànàmáná ni ògbóǹtarìgì tó ní ìmọ̀ ṣe, kí ó sì tẹ̀lé àwọn ìlànà iná mànàmáná agbègbè.
- Disconnect power before performing any installation, maintenance, or repair work.
- Do not expose the outdoor unit to direct water spray or immerse it in water.
- Avoid placing the indoor units in areas with high humidity, extreme temperatures, or direct sunlight.
- Use only the specified power supply for the system.
- Jeki ọja naa kuro ni arọwọto awọn ọmọde.
3. Package Awọn akoonu
The ELRO VD60/BYRVD62 system typically includes the following components:
- 1x Outdoor Unit (Door Station with Camera and Call Buttons)
- 2x Indoor Units (Monitor with Handset)
- 1x Power Adapter for Outdoor Unit
- Ohun elo iṣagbesori (skru, awọn pilogi ogiri)
- Itọsọna olumulo
Nọmba 3.1: Pariview of the ELRO VD60/BYRVD62 outdoor unit and two indoor units. The outdoor unit features a camera, speaker, microphone, and two illuminated call buttons. Each indoor unit includes a monitor screen, a handset for communication, and control buttons.
4. Ọja Ipariview
4.1 ita gbangba Unit
- Kamẹra: Captures video of visitors. Features night vision capabilities.
- Agbọrọsọ: For audio output from the indoor unit.
- Gbohungbohun: For audio input to the indoor unit.
- Call Buttons (2a, 2b): Illuminated buttons for visitors to call specific indoor units.
- Imọlẹ LED: Provides illumination for the call buttons and potentially for night vision.
4.2 Ipele inu
- Atẹle: Displays video feed from the outdoor camera.
- Amudani: For two-way audio communication with the outdoor unit.
- Bọtini itusilẹ ilẹkun: Activates the electric door opener (if connected).
- Bọtini Atẹle: Allows manual activation of the camera to view outside without a call.
- Bọtini Ọrọ sisọ: Used to initiate or end communication via the handset.
- Ringtone Settings: DIP switch for ringtone repetition (2x or 6x) and a volume wheel for handset audio.
Nọmba 4.1: Diagram illustrating key features of the ELRO VD60/BYRVD62 system, including the 2.4"/6cm monitor, wired connection, camera, LED lighting, two-way communication, and call buttons.
5. Eto ati fifi sori
Careful planning and execution are essential for optimal performance.
5.1 Wiring awọn ibeere
- The system requires a four-wire connection between the outdoor unit and each indoor unit.
- For distances up to 20 meters, standard wiring may suffice. For longer distances, up to a theoretical maximum of 30 meters, it is recommended to use a multi-strand cable with a cross-section of at least 0.75mm² to maintain sound quality.
- Ensure proper polarity for all connections. Refer to the wiring diagram provided in the packaging for detailed connection points.
5.2 Mounting the Outdoor Unit
- Choose a suitable location for the outdoor unit, typically near the entrance, at a height that allows the camera to capture visitors' faces clearly.
- Mark the drilling points for mounting the outdoor unit. A drilling template is not included, so careful measurement is required.
- Drill holes, insert wall plugs, and secure the outdoor unit using the provided screws.
- Connect the wiring from the indoor units and the power supply to the outdoor unit.
5.3 Mounting the Indoor Units
- Select a convenient indoor location for each monitor, away from direct heat or moisture.
- Mark and drill mounting holes, then secure the indoor unit bracket to the wall.
- Connect the four-wire cable from the outdoor unit to the indoor unit.
- Attach the indoor unit to its bracket.
5.4 Ipese Agbara
- The outdoor unit is powered by the included power adapter (typically 15V). Connect this adapter to a suitable power outlet.
- It is recommended to install the power adapter in a protected indoor location, as it is not designed for outdoor exposure.
5.5 Door Opener Connection
- The system supports connection to an electric door opener. The door opener connects directly to the outdoor unit.
- Note on Security: Connecting the door opener directly to the outdoor unit may present a security vulnerability if the outdoor unit is compromised. Consider additional security measures for your door.
6. Awọn ilana Iṣiṣẹ
6.1 Ngba ipe kan
- When a visitor presses a call button on the outdoor unit, the corresponding indoor unit will ring, and the monitor will automatically display the video feed from the outdoor camera.
- Lift the handset to begin two-way communication with the visitor.
- Press the "Talk" button on the indoor unit to speak. Release to listen.
6.2 Nsii ilekun
- During a call, press the "Door Release" button on the indoor unit to activate the electric door opener.
- The door will typically remain unlocked for approximately 7 seconds before automatically re-locking.
6.3 Monitoring Outside
- Si view the outdoor camera feed without a visitor calling, press the "Monitor" button on the indoor unit.
- You can also initiate two-way communication by lifting the handset and pressing the "Talk" button while monitoring.
- Akiyesi: Only one indoor unit can actively monitor or communicate at a time. If one unit is in use, the other will be temporarily unavailable for monitoring.
6.4 Siṣàtúnṣe Eto
- Ringtone Repetition: On the back of the indoor unit, locate the DIP switch. This switch allows you to select between 2 or 6 ringtone repetitions when a call is received.
- Iwọn foonu: A small adjustable wheel on the indoor unit (often near the DIP switch) controls the volume of the handset audio.
- Iwọn didun ohun orin ipe: The ringtone volume has three possible settings. Even at the lowest setting, the ringtone can be quite loud.
7. Itọju
- Ninu: Use a soft, dry cloth to clean the outdoor and indoor units. Do not use abrasive cleaners or solvents.
- Awọn isopọ: Lokọọkan ṣayẹwo gbogbo awọn asopọ onirin lati rii daju pe wọn wa ni aabo ati ominira lati ipata.
- Ẹrọ ita gbangba: Ensure the camera lens and microphone/speaker grilles are clear of dirt, dust, or spiderwebs fun ti aipe išẹ.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No video or audio | Loose wiring connection, no power, faulty unit. | Check all 4-wire connections. Ensure the outdoor unit's power adapter is plugged in and receiving power. Contact support if issues persist. |
| Didara fidio ti ko dara | Dirty camera lens, insufficient lighting, long cable run with inadequate wire gauge. | Clean the camera lens. Ensure adequate lighting. Verify cable gauge for long runs (0.75mm² recommended for over 20m). |
| Poor audio quality (crackling, low volume) | Loose wiring, microphone/speaker obstruction, handset volume setting. | Check wiring. Ensure microphone and speaker grilles are clear. Adjust handset volume wheel. |
| Door opener not working | Incorrect wiring to door opener, faulty door opener, system malfunction. | Verify door opener wiring to the outdoor unit. Test the door opener independently if possible. |
| Night vision is ineffective | Insufficient ambient light for IR, camera obstruction. | While the system has night vision, it performs best with some ambient light. Ensure no obstructions block the camera. |
9. Awọn pato
- Brand: ELRO
- Nọmba awoṣe: BYRVD62
- Awọn iwọn ọja: 26.01 x 11 x 22 cm (Outdoor unit and indoor units combined package dimensions); 1.7 kg (Total weight)
- Ara: 2-Family Video Door Intercom
- Ohun elo: Ṣiṣu
- Asopọmọra: Oníwáyà (ètò oníwáyà méjì)
- Ibi ti ina elekitiriki ti nwa: External power adapter (for outdoor unit, typically 15V)
- Iwon Atẹle: Approximately 2.4 inches / 6 cm (from image diagram)
- Kamẹra: Integrated with night vision capability
10. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official ELRO webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
