1. Ọja Ipariview
The Sunlite PLT26/E/SP27K is a 26-watt compact fluorescent plug-in light bulb designed for use with external electronic ballasts. This 4-pin bulb provides 1800 lumens of light output with a color rendering index (CRI) of 80, ensuring accurate color perception. It features a 2700K color temperature, producing a warm white light similar to traditional incandescent bulbs. The bulb is engineered for longevity, offering an average lamp life of 10,000 hours, and is compatible with GX24Q-3 4-Pin sockets.
Figure 1: Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb. This image displays the overall structure of the 4-pin compact fluorescent bulb.
2. Alaye Aabo
Please read and understand all safety instructions before installing or replacing the light bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Agbara Pa: Always turn off the power to the fixture at the circuit breaker or fuse box before attempting any installation, removal, or maintenance.
- Fara bale: Allow the bulb to cool completely before handling or replacing it to prevent burns.
- Sisọnu Todara: This compact fluorescent lamp contains a small amount of mercury. Dispose of the bulb according to local, state, and federal regulations. Do not dispose of in regular household trash.
- Ibamu Ballast: Ensure that the fixture's electronic ballast is compatible with a 26-watt, 4-pin CFL bulb (GX24Q-3 base). Using an incompatible ballast can damage the bulb or fixture.
- Lilo inu ile Nikan: A ṣe àgbékalẹ̀ gílóòbù yìí fún lílo nínú ilé nínú àwọn ohun èlò tó yẹ.
- Ti kii ṣe Dimmable: This bulb is generally not dimmable unless explicitly stated on the packaging or fixture. Using it with a dimmer not designed for CFLs may cause damage or malfunction.
3. fifi sori
Follow these steps to properly install your Sunlite PLT26/E/SP27K light bulb:
- Ṣe àyẹ̀wò Pípa Agbára: Confirm that the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Yọ Bulb atijọ kuro (ti o ba wulo): If replacing an existing bulb, gently grasp the base of the old bulb and pull it straight out from the socket. Avoid twisting the glass tubes.
- Ṣayẹwo Socket: Ensure the GX24Q-3 4-pin socket is clean and free from debris.
- So awọn Pinni pọ: Carefully align the four pins on the base of the new Sunlite bulb with the corresponding slots in the fixture's socket.
- Fi Bọlubu sii: Push the bulb firmly and straight into the socket until it is securely seated. Do not force the bulb or twist the glass tubes.
olusin 2: Isunmọ view of the 4-pin base of the Sunlite PLT26/E/SP27K bulb. This image highlights the GX24Q-3 base for proper alignment during installation.
4. Isẹ
Once the bulb is securely installed and the power is restored, the Sunlite PLT26/E/SP27K bulb will illuminate when the light switch is turned on. Compact fluorescent lamps typically require a brief warm-up period to reach full brightness and stable color output. This is normal operation and not an indication of a defect.
5. Itọju
The Sunlite PLT26/E/SP27K light bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Ninu: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass tubes with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb.
- Rọpo: When the bulb reaches the end of its operational life (approximately 10,000 hours), it will need to be replaced. Follow the installation steps in Section 3 in reverse to safely remove the old bulb and install a new one.
6. Laasigbotitusita
If you encounter issues with your Sunlite PLT26/E/SP27K light bulb, refer to the following troubleshooting tips:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Boolubu ko ni tan imọlẹ | Ko si agbara lati ṣeto Boolubu ko joko daradara boolubu ti ko ni abawọn Ballast ti ko ni abawọn | Ṣayẹwo Circuit fifọ ati odi yipada Ensure bulb is fully inserted into socket Ropo boolubu pẹlu titun kan Consult an electrician to check/replace ballast |
| Bulb flickers or cycles on/off | Incompatible or failing ballast Boolubu sunmo opin ti aye Asopọ alaimuṣinṣin | Ensure ballast is compatible; replace if failing Rọpo boolubu Re-seat bulb firmly in socket |
| Ijade ina jẹ baibai | Boolubu ko ni kikun warmed soke Boolubu sunmo opin ti aye | Allow a few minutes for bulb to reach full brightness Rọpo boolubu |
7. Awọn pato
Detailed technical specifications for the Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb:
Figure 3: Sunlite PLT26/E/SP27K bulb illustrating its approximate length of 5.20 inches.
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | Sunlite |
| Nọmba awoṣe | PLT26/E/SP27K |
| Imọlẹ Iru | CFL, Fuluorisenti |
| Wattage | 26 Wattis |
| Imọlẹ | 1800 Lumens |
| Iwọn otutu awọ | 2700 Kelvin (Gbona Funfun) |
| Atọka Rendering Awọ (CRI) | 80 |
| Bulb Base | GX24Q-3 4-Pin |
| Apapọ Life | Awọn wakati 10,000 |
| Voltage | 100-120 folti, 60 Hertz |
| Bulb Gigun | Isunmọ 5.20 inches |
| Ohun elo | Copper (pins) |
| inu ile / ita gbangba Lilo | Ninu ile |
8. Atilẹyin ọja ati Support
For specific warranty information regarding your Sunlite PLT26/E/SP27K light bulb, please refer to the product packaging or contact Sunlite customer support directly. General support and product inquiries can be directed to the manufacturer's official channels.
Olupese: Sunlite
Webojula: Visit the Sunlite Store on Amazon
