Electro-Harmonix Neo Clone Analog Chorus Pedal User Manual

Ọrọ Iṣaaju

The Electro-Harmonix Neo Clone is an analog chorus pedal designed to deliver the classic Small Clone sound in a compact, pedalboard-friendly enclosure. It utilizes a high-quality bucket brigade chip for its true analog design, providing a rich and lush sonic texture.

Awọn ẹya ara ẹrọ

• Compact, pedalboard-friendly footprint.
• Total analog design using a high-quality bucket brigade chip.
• Sultry sonic texture with depth control.
• Operates on a 9V battery (included) or optional 9V power adapter.

Ṣeto

Agbara Efatelese

The Neo Clone can be powered by a 9V battery or an optional 9V DC power adapter. A 9V battery is included with the pedal. To install or replace the battery, remove the four screws on the bottom plate of the pedal. Connect the battery to the battery clip inside the pedal and replace the bottom plate.

For external power, use a 9V DC power adapter with a center-negative plug. The power jack is located at the top of the pedal.

Nsopọ Pedal

1. So ohun èlò orin rẹ (fún àpẹẹrẹ, gítà) mọ́ ÀWỌN Ọ̀RỌ̀ jack ní apá ọ̀tún ti pedal nípa lílo okùn irinṣẹ́ 1/4-inch boṣewa.
2. Sopọ awọn AMP (OUTPUT) jack on the left side of the pedal to your amplifier or the next effect pedal in your signal chain using a standard 1/4-inch instrument cable.
3. If using an external power adapter, plug it into the 9V DC jack.

The Neo Clone is typically placed early in the signal chain, often before distortion or overdrive pedals, to achieve a classic chorus sound.

Ṣiṣẹ Pedal

The Neo Clone features simple controls for intuitive operation:

Awọn iṣakoso

• KỌRỌ RATE: This knob controls the speed of the chorus effect. Turning it clockwise increases the modulation speed, while turning it counter-clockwise decreases it.
• DEPTH Switch: This toggle switch selects between two different depth settings for the chorus effect. The "up" position provides a deeper, more pronounced chorus, while the "down" position offers a more subtle effect.
• Ẹsẹ ẹlẹsẹ: Engages or bypasses the chorus effect. The red LED illuminates when the effect is active.

Ipilẹ Lilo

To activate the chorus effect, press the footswitch. The red LED will light up. To bypass the effect, press the footswitch again. Experiment with the RATE knob and DEPTH switch to find your desired chorus sound. Lower rate settings with higher depth can create lush, swirling textures, while higher rate settings can produce more vibrato-like or rotary speaker effects.

Image: The Electro-Harmonix Neo Clone pedal, showing its Rate knob, Depth switch, and footswitch. Input and Amp (Output) jacks are visible on the sides.

Awọn fidio ifihan

Itoju

• Jẹ́ kí pedal náà mọ́ tónítóní kí ó má ​​sì sí eruku. Lo aṣọ rírọ̀ tí ó gbẹ fún fífọ nǹkan mọ́.
• Yẹra fún fífi ẹsẹ̀ sí ibi tí ó gbóná janjan, ọriniinitutu, tàbí oòrùn tààrà.
• When not in use for extended periods, remove the battery to prevent leakage and damage.
• Ensure all cable connections are secure to prevent signal loss or intermittent operation.

Laasigbotitusita

No Sound or Weak Signal

• Check all cable connections to ensure they are securely plugged into the correct input/output jacks.
• Verify the power supply. If using a battery, ensure it is fresh and correctly installed. If using an adapter, confirm it is the correct voltage (9V DC) àti polarity (aarin-odi).
• Test the pedal with a different instrument cable or amplifier to rule out external equipment issues.

"Pop" Sound When Engaging Effect

Some true bypass pedals, including the Neo Clone, may produce a slight "pop" sound when engaged. This is often a characteristic of the true bypass switching mechanism and typically does not indicate a malfunction. If the pop is excessively loud, ensure proper grounding of your equipment and try engaging the pedal when not actively playing.

Awọn pato

Atilẹyin ọja ati Support

Electro-Harmonix products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Electro-Harmonix webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.