Scosche HA1710B Double DIN Radio Install Dash Kit Instruction Manual

1. Ifihan

This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.

Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.

2. Ibamu

This dash kit is compatible with select Ọdun 2001-05 Honda Civic models. It is not compatible with Civic Si awọn awoṣe.

For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.

Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.

Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.

Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• Radio Bezel (Dash Kit)
• Ilana itọnisọna
• Mounting Brackets (Left and Right)
• Hardware (screws, clips)

Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.

Aworan: Angled view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.

Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.

4. Alaye Aabo

• Máa yọ ibi tí ọkọ̀ náà ń so mọ́ kúrò kí o tó bẹ̀rẹ̀ iṣẹ́ iná mànàmáná láti dènà ìyípo kúkúrú àti ìkọlù iná mànàmáná.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ, gẹgẹbi awọn gilaasi ailewu.
• Rii daju pe ọkọ ayọkẹlẹ ti duro lori ipele ipele kan pẹlu idaduro idaduro duro.
• Refer to your vehicle's service manual for specific instructions on removing factory components.
• If you are unsure about any step, consult a qualified professional installer.

5. fifi sori

The following video provides a comprehensive overview of the installation process, from preparation to final testing. Detailed steps are also provided below.

5.1. Igbaradi

1. Ge batiri kuro: Ge asopọ ebute batiri odi ti ọkọ rẹ.
2. Review Awọn ilana: Read through the entire instruction manual provided with the dash kit and your new stereo.
3. Identify Tabs: Lẹhin ti tunviewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.

5.2. Yiyọ Redio Ile-iṣẹ

4. Yọ awọn panẹli gige kuro: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
5. Yọ Rédíò Ilé Iṣẹ́ kúrò: Locate and unscrew the mounting screws holding the factory radio in place.
6. Yọ awọn ìdènà kuro: Gently pull out the factory radio and unplug all electrical harnesses and antenna cables from the back.

5.3. Wiring Awọn isopọ

Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).

• Use splice connectors or solder connections for secure and reliable electrical contact.
• Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
• Some wires, such as amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.

5.4. Dash Kit Assembly

7. So awọn akọmọ: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
8. Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.

5.5. Fifi sori ẹrọ Sitẹrio Tuntun

9. Asopọmọra Waya: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
10. Mount Stereo: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
11. Tun fi Trim sori ẹrọ: Reattach all removed trim panels, ensuring they snap securely into place.

5.6. Ik Igbesẹ

12. Batiri Atunso: Tun ebute batiri odi so pọ.
13. Awọn iṣẹ idanwo: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.

6. Isẹ

This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.

7. Itọju

• Periodically check the mounting screws for tightness.
• Clean the dash kit and stereo faceplate with a soft, damp asọ. Yẹra fun awọn kẹmika lile tabi awọn olutọpa abrasive.
• Ensure no debris accumulates around the stereo or in the dash opening.

8. Laasigbotitusita

• Stereo does not power on:
  • Ṣayẹwo awọn asopọ batiri.
  • Verify all wiring harness connections are secure and correct.
  • Check the stereo's fuse.
• Poor fit of stereo in dash kit:
  • Ensure all unnecessary tabs on the dash kit were removed.
  • Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
  • Verify factory radio brackets are used as required.
• Dash kit does not fit vehicle:
  • Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
  • Ensure all factory components were removed correctly.

9. Awọn pato

10. Atilẹyin ọja ati Support

The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.

For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche webaaye tabi apoti ọja fun alaye olubasọrọ.