Kerubu WMT-555C Tuner ati Metronome pẹlu Afọwọṣe Olumulo Gbigba
Model: WMT-555C | Brand: Cherub
Ọrọ Iṣaaju
The Cherub WMT-555C is a versatile electronic device designed for musicians, combining a chromatic tuner and a digital metronome into a single, portable unit. It is suitable for a wide range of instruments, including guitars and orchestral instruments, and features a clip-on pickup for accurate acoustic instrument tuning.
This manual provides detailed instructions for the setup, operation, and maintenance of your WMT-555C to ensure optimal performance and longevity.
Ọja Pariview
Image: Cherub WMT-555C Tuner and Metronome with Pickup. The device features a large LCD screen, control buttons, a speaker, and input jacks. Below it is the clip-on pickup with a 1/4" jack.
The WMT-555C unit includes:
- Integrated Chromatic Tuner
- Digital Metronome
- Gbohungbohun ti a ṣe sinu
- 1/4" Jack ìṣípò
- Agbọrọsọ Jack
- Clip-on Pickup (for acoustic instruments)
Key Controls and Display Elements (Refer to image above):
- Ifihan LCD: Shows Metronome settings (Tempo, Time Signature, Rhythm) or Tuner information (Note, Pitch).
- Vol. (Volume): Ṣe atunṣe iwọn didun ti o wu jade.
- Jack Earphone: Fun ikọkọ gbigbọ.
- Bọtini Ohùn: Activates the tone generator in Tuner mode.
- VALUE Buttons (Up/Down): Adjusts values like tempo, pitch, or rhythm.
- TEMPO Buttons (Up/Down): Specifically adjusts metronome tempo.
- PITCH Buttons (Up/Down): Adjusts the reference pitch in Tuner mode.
- ITEM Button: Navigates through settings or parameters.
- Bọtini MODE: Switches between Tuner and Metronome modes.
- BEAT Button: Adjusts the beat pattern in Metronome mode.
- Bọtini PA / PA: Ṣe agbara ẹrọ naa tan tabi pa.
- PLAY Metronome Button: Starts or stops the metronome.
- Jack INPUT: 1/4" input for instruments or pickup.
- MIC: Built-in microphone for tuning acoustic instruments without the pickup.
Ṣeto
1. Fifi sori batiri
The WMT-555C requires 1 AAA battery for operation. Ensure the battery is inserted with the correct polarity as indicated inside the battery compartment. A fresh alkaline battery is recommended for optimal performance and battery life.
2. Agbara lori / Paa
Tẹ awọn TAN/PA button to power the unit on. Press and hold the TAN/PA button again to power it off.
3. Connecting the Pickup (Optional)
For tuning acoustic instruments, connect the provided clip-on pickup to the ÀWỌN Ọ̀RỌ̀ jack on the side of the unit. Attach the clip securely to your instrument, typically near the bridge or soundboard, to best capture vibrations.
Awọn ilana Iṣiṣẹ
Ipo Tuner
- Select Tuner Mode: Tẹ awọn MODE button until "Tuner" is displayed on the screen.
- Ọna igbewọle:
- Gbohungbohun inu: For acoustic instruments, ensure no cable is plugged into the INPUT jack. The built-in MIC will detect sound.
- Pickup/Instrument Cable: Plug the clip-on pickup or your instrument's 1/4" cable into the ÀWỌN Ọ̀RỌ̀ jaki.
- Tun ohun elo rẹ ṣe: Play a single note on your instrument. The display will show the detected note and indicate whether it is sharp, flat, or in tune. Adjust your instrument's tuning pegs until the display indicates the note is in tune.
- Key Selection: The tuner supports chromatic tuning in 4 keys: C, F, B♭, and E♭. Use the Nkan button to cycle through these key options if needed.
- Pitch Calibration: The reference pitch can be calibrated from 435Hz to 445Hz. Use the PITCH buttons to adjust the A4 reference frequency. The default is typically 440Hz.
- Olupilẹṣẹ ohun orin: Tẹ awọn OHUN button to activate the built-in tone generator, which produces a reference tone for manual tuning.
Ipo Metronome
- Select Metronome Mode: Tẹ awọn MODE button until "Metronome" is displayed on the screen.
- Ṣatunṣe Tempo: Lo awọn TEMPO buttons (Up/Down) to set the desired beats per minute (BPM). The range is 30-230 BPM.
- Set Time Signature: Tẹ awọn Nkan button to select the time signature setting. Use the IYE buttons to choose from available time signatures: -/4 (0), 1/4, 2/4, 3/4, 4/4, 3/8, 6/8.
- Yan Rhythm: Tẹ awọn Lu button to cycle through various rhythm patterns (e.g., quarter notes, eighth notes, triplets).
- Start/Stop Metronome: Tẹ awọn PLAY Metronome button to start the metronome click. Press it again to stop.
- Ṣatunṣe Iwọn didun: Lo awọn Vol. slider to adjust the metronome's output volume.
Itoju
- Ninu: Use a soft, dry cloth to clean the unit. Do not use liquid cleaners or abrasive materials.
- Itọju Batiri: Remove the battery if the unit will not be used for an extended period to prevent leakage.
- Ibi ipamọ: Store the WMT-555C in a cool, dry place, away from direct sunlight and extreme temperatures.
- Mimu: Avoid dropping the unit or subjecting it to strong impacts, as this can damage internal components.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni agbara lori. | Batiri ti ku tabi ti ko tọ. | Rọpo batiri AAA, ki o rii daju pe o tọ polarity. |
| Tuner is not detecting sound. | Incorrect input method selected; low instrument volume; faulty pickup/cable. | Ensure pickup is securely connected or use the built-in MIC. Increase instrument volume. Check pickup/cable for damage. |
| Metronome sound is too quiet. | Volume slider set too low; speaker obstruction. | Ṣatunṣe awọn Vol. slider to increase output. Ensure the speaker grille is clear. Consider using headphones. |
| Tuner response is slow. | Weak signal from instrument; noisy environment. | Ensure a clear, sustained note is played. Use the clip-on pickup in noisy environments. |
Awọn pato
- Awoṣe: WMT-555C
- Ibiti Tuning: A0 (27.5Hz) - A3 (1760Hz)
- Itọkasi ipolowo: 435Hz - 445Hz (Adjustable)
- Awọn bọtini Iyipada: C, F, B♭, E♭
- Ibiti Tempo: 30 - 230 BPM
- Time Signatures: -/4 (0), 1/4, 2/4, 3/4, 4/4, 3/8, 6/8
- Agbara: 1 x Batiri AAA (pẹlu)
- Awọn iwọn: Isunmọ 8 x 1 x 5 inches
- Ìwúwo: Isunmọ 4.2 iwon
- Iṣawọle: 1/4" Jack, Built-in Microphone
- Abajade: Earphone Jack, Built-in Speaker
