Peerless Paramount PF640 Universal Flat Panel Wall Mount Instruction Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe and proper installation and use of the Peerless Paramount PF640 Universal Flat Panel Wall Mount. This mount is designed to securely hold flat panel displays ranging from 23 inches to 46 inches, with a maximum load capacity of 150 lbs. Please read all instructions carefully before beginning installation.

Alaye Aabo

• Agbara iwuwo: Do not exceed the maximum load capacity of 150 lbs (68 kg). Exceeding this limit can result in serious injury or property damage.
• Ilana Odi: Ensure the mounting surface can safely support the combined weight of the mount and the display. Consult a qualified professional if unsure.
• Awọn irinṣẹ: Use appropriate tools for installation. Wear safety glasses and other protective gear as needed.
• Awọn ọmọde: Keep children away from the installation area during setup.
• Afẹfẹ: Ensure adequate ventilation around the mounted display.

Awọn ẹya Akojọ

Rí i dájú pé gbogbo àwọn ẹ̀yà ara wà níbẹ̀ kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ. Tí àwọn ẹ̀yà ara kan bá sọnù tàbí tí wọ́n bá bàjẹ́, má ṣe tẹ̀síwájú pẹ̀lú fífi sori ẹ̀rọ náà kí o sì kan sí ìrànlọ́wọ́ àwọn oníbàárà.

• Wall Apejọ
• Display Adapter Brackets (2)
• Mounting Hardware Kit (various screws, washers, spacers for display and wall)
• Fifi sori Àdàkọ

Eto ati fifi sori

Follow these steps carefully for proper installation. Two people are recommended for safe installation.

1. Ṣetan Odi naa:
   • Locate wall studs using a stud finder. Mark the center of the studs.
   • Position the installation template on the wall at the desired height. Ensure it is level.
   • Mark the drilling locations through the template onto the wall.
2. So Awo Odi:
   • Lilu awọn ihò awaoko ni awọn ipo ti o samisi.
   • Secure the wall plate assembly to the wall using the appropriate lag bolts and washers. Ensure it is firmly attached and level.
3. Attach Adapter Brackets to Display:
   • Carefully place the display face down on a soft, clean surface.
   • Ṣe àwárí àwọn ihò ìsopọ̀ VESA tí ó wà lẹ́yìn ìfihàn rẹ.
   • Select the correct screws, washers, and spacers from the hardware kit that fit your display's mounting holes.
   • Attach the two display adapter brackets to the back of the display. Ensure the hooks on the brackets are facing upwards and are positioned to engage with the wall plate.
4. Mount Display to Wall Plate:
   • With assistance, carefully lift the display with the attached adapter brackets.
   • Hook the top edge of the display adapter brackets onto the top rail of the wall plate.
   • Gently lower the display until the brackets fully engage with the wall plate.
   • Secure the bottom of the display adapter brackets to the wall plate using the provided security screws or locking mechanisms to prevent accidental dislodgement.
5. Adjusting Display (if applicable):
   • The PF640 allows for horizontal screen adjustment up to 6 inches for centering the screen on the wall. Loosen the appropriate screws on the display adapter brackets, slide the display to the desired position, and re-tighten the screws.

Ṣiṣẹ

Once installed, the Peerless Paramount PF640 provides a secure, flat mounting solution. While primarily a fixed flat mount, it offers minor horizontal adjustment for optimal positioning.

• Atunse petele: As noted in the installation section, the display can be shifted horizontally up to 6 inches after initial mounting to achieve perfect centering. This is done by loosening the securing screws on the display brackets, sliding the display along the wall plate, and then re-tightening the screws.
• Iṣakoso USB: Ensure all cables connected to your display are routed safely and do not interfere with the mount or put strain on the connections.

Itoju

Regular maintenance ensures the longevity and safety of your wall mount.

• Ninu: Nu oke naa pẹlu asọ ti o gbẹ. Yago fun abrasive ose tabi epo.
• Ayewo Igbakọọkan: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or minor shifts can cause fasteners to loosen.
• Ṣíṣàyẹ̀wò Ìwúwo: Do not add additional weight to the display or mount beyond its specified capacity.

Laasigbotitusita

Ti o ba pade awọn ọran lakoko tabi lẹhin fifi sori ẹrọ, tọka si awọn iṣoro ti o wọpọ ati awọn solusan atẹle.

• Display is not level:

  Ojutu: Ensure the wall plate was installed level. If the wall plate is level, check if the display adapter brackets are properly aligned and secured to the display. Some mounts allow for minor post-installation leveling adjustments; refer to the specific design of the PF640 for this feature.

• Òkè kan rí àìdúróṣinṣin:

  Ojutu: Immediately remove the display. Re-check all wall mounting screws to ensure they are securely fastened into wall studs or appropriate anchors. Verify the wall structure can support the weight. If unsure, consult a professional.
• Cannot attach display to wall plate:

  Ojutu: Ensure the display adapter brackets are correctly oriented and attached to the display, and that the hooks are properly aligned with the wall plate's top rail. Verify that the display's VESA pattern is compatible with the mount's adapter brackets.

Awọn pato

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the official Peerless webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.

Olupese: Aini ẹlẹgbẹ

Webojula: www.peerless-av.com