Fluke 113 True-RMS Utility Multimeter User Manual

1. Ifihan

The Fluke 113 True-RMS Utility Multimeter is a versatile digital multimeter designed for general-purpose electrical testing. It provides accurate measurements for various electrical properties, making it an essential tool for industrial and commercial applications.

This manual provides detailed instructions for the safe and effective use of your Fluke 113 multimeter. Please read it thoroughly before operation and retain it for future reference.

olusin 1: Iwaju view of the Fluke 113 True-RMS Utility Multimeter, showing its display, rotary dial, and function buttons.

2. Eto

2.1 Unpacking ati ayewo

Upon receiving your Fluke 113 multimeter, carefully inspect the packaging for any signs of damage. Remove the multimeter and its accessories from the box. The package should contain the UTILITY MULTIMETER and a holster with built-in probe holders.

2.2 Fifi sori batiri

The Fluke 113 multimeter uses a 9V battery. A battery is typically installed from the factory. To access the battery compartment, refer to the maintenance section for instructions on opening the meter. Ensure the battery is correctly oriented according to the polarity markings.

2.3 Nsopọ Awọn itọsọna Igbeyewo

Insert the test leads into the appropriate input jacks on the multimeter. For most measurements, the black lead connects to the COM (common) jack and the red lead connects to the VΩHz jack.

Figure 2: The Fluke 113 multimeter held in a gloved hand, demonstrating its ergonomic design and readiness for use.

3. Awọn ilana Iṣiṣẹ

The Fluke 113 offers both manual and auto-ranging capabilities for user flexibility. Always ensure the meter is set to the correct function and range before making any measurements.

3.1 Titan / Pa a

Rotate the central dial to the desired function to power on the meter. To power off, rotate the dial to the OFF position. The meter has a sleep mode to maximize battery life.

3.2 Iwọn AC / DC Voltage

1. Connect the black test lead to the COM jack and the red test lead to the VΩHz jack.
2. Rotate the dial to the V~ (Ìdìpọ̀ ACtage) tabi V- (DC Voltage) position. The meter supports auto-ranging.
3. Touch the test probes to the circuit points where you want to measure voltage.
4. Ka voltage value on the digital display. The 6000-count resolution, 3-1/2 digit digital display is backlit for readability in low-light conditions.

Figure 3: The Fluke 113 multimeter being used to measure voltage within an electrical panel, highlighting its practical application.

3.3 Idiwọn Resistance

1. Rii daju pe iyika naa ti ni agbara ṣaaju idiwọn resistance.
2. Connect the black test lead to the COM jack and the red test lead to the VΩHz jack.
3. Rotate the dial to the Ω Ipò (àtakò).
4. Touch the test probes across the component or circuit path you wish to measure.
5. Ka iye resistance lori ifihan.

3.4 Idiwọn Capacitance

The Fluke 113 measures capacitance up to 9,999 microfarads.

1. Ensure the capacitor is fully discharged before measuring.
2. Connect the black test lead to the COM jack and the red test lead to the VΩHz jack.
3. Rotate the dial to the CAP (Ipo agbara).
4. Fi ọwọ́ kan àwọn ìwádìí ìdánwò sí àwọn ebute capacitor.
5. Ka iye kapasito lori ifihan.

3.5 Diode Check and Continuity

The meter has a diode check for testing general-purpose germanium, silicon, and power diodes. It also features a continuity beeper which provides audible detection of resistance by turning on at less than 25 ohms and off at 250 ohms. It is also able to simultaneously check for voltage ati itesiwaju.

1. Connect the black test lead to the COM jack and the red test lead to the VΩHz jack.
2. Rotate the dial to the Diode / Itesiwaju ipo.
3. For diode check, place the probes across the diode. The display will show the forward voltage ju.
4. For continuity, place the probes across the circuit path. An audible beep indicates continuity.

3.6 Max/Min and Hold Functions

• O pọju/Iṣẹju: Tẹ awọn MINI MAX button to record signal fluctuations. The meter will display the maximum, minimum, and average readings.
• Duro: Tẹ awọn DIMU button to freeze the current measurement on the display for easier reading.

4. Itọju

Proper maintenance ensures the longevity and accuracy of your Fluke 113 multimeter.

4.1 Ninu

Pa ọran naa pẹlu ipolowoamp cloth and mild detergent. Do not use abrasives or solvents. Keep the input jacks free of dirt and moisture.

4.2 Batiri Rirọpo

The meter uses a 9V battery with a battery life of approximately 300 hours without backlight. When the battery indicator appears on the display, replace the battery promptly.

1. Turn the meter off and disconnect all test leads from the meter.
2. Remove the screw from the battery compartment cover on the back of the meter.
3. Gbe kuro ni ideri.
4. Remove the old battery and replace it with a new 9V battery, observing polarity.
5. Rọpo ideri kompaktimenti batiri ki o ni aabo pẹlu dabaru.

4.3 Fiusi Rirọpo

If the meter fails to measure current, the fuse may need replacement. Refer to the full user guide for detailed instructions on fuse replacement, as this procedure requires opening the meter case.

5. Laasigbotitusita

This section addresses common issues you might encounter with your Fluke 113 multimeter.

6. Awọn pato

• Awọn iwọn: AC/DC voltage, resistance, capacitance
• Awọn idanwo: Itesiwaju, Diode
• Voltage Ibiti: Up to 600V (AC/DC)
• Ibi atako: Up to 60 kiloohms
• Iwọn Agbara: Up to 9,999 microfarads
• Ifihan: 6000-count resolution, 3-1/2 digit digital display, backlit
• RMS otitọ: Yes, for accurate readings on linear or nonlinear loads
• Iwọn: Manual and Auto-ranging
• Awọn iṣẹ: Max/Min recording, Data Hold
• Iwọn Aabo: Category III to 600V, Category IV to 300V (IEC 61010 standards)
• Orisun Agbara: Batiri 9V (fi sori ẹrọ)
• Igbesi aye batiri: Approximately 300 hours (without backlight)
• Awọn iwọn (H x W x D): 6.58 x 3.35 x 1.81 inches
• Ìwúwo: 13 iwon. / 404 g
• To wa: Meter, holster with built-in probe holders

7. Atilẹyin ọja & Atilẹyin

7.1 atilẹyin ọja Alaye

Fluke Corporation warrants this product to be free from defects in material and workmanship under normal use and service. The warranty period is specified in the product's official warranty statement, typically found in the full user manual or on the Fluke webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

7.2 Onibara Support

For technical assistance, service, or repair, please contact Fluke Customer Service. You can find contact information and additional resources, including the full user guide, on the official Fluke webojula: www.fluke.com.

It is recommended to source genuine Fluke products from local authorized distributors to ensure product authenticity and valid warranty coverage.