1. Ifihan
This manual provides essential information for the proper installation, operation, and maintenance of your Rubbermaid 1315-L3 12-inch Replacement Wheel. Please read these instructions carefully before proceeding to ensure safe and efficient use. Retain this manual for future reference.
2. Alaye Aabo
Always prioritize safety when handling and installing replacement parts. Failure to follow safety guidelines may result in injury or damage to equipment.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE), gẹgẹbi awọn ibọwọ ati aabo oju, lakoko fifi sori ẹrọ.
- Ensure the tilt truck is stable and secured before attempting any wheel replacement.
- Do not exceed the weight capacity of the tilt truck after wheel replacement.
- Pa awọn ọmọde ati awọn oṣiṣẹ laigba aṣẹ kuro ni agbegbe iṣẹ.
3. Ọja Ipariview
The Rubbermaid 1315-L3 is a 12-inch replacement wheel designed specifically for the Rubbermaid 1315 Tilt Truck. It is engineered for durability and smooth operation, ensuring the continued mobility of your equipment.
Figure 1: The Rubbermaid 1315-L3 12-inch replacement wheel. This image shows a black wheel with a gray hub, designed for the 1315 Tilt Truck.
4. Eto ati fifi sori
Follow these steps to replace a wheel on your Rubbermaid 1315 Tilt Truck:
- Prepare the Tilt Truck: Ensure the tilt truck is empty and clean. Position it on a flat, stable surface. If possible, elevate the side requiring wheel replacement using a suitable lifting device or blocks to allow access to the wheel axle. Ensure it is securely supported to prevent accidental movement.
- Yọ Kẹ̀kẹ́ Àtijọ́ kúrò:
- Locate the retaining pin or bolt securing the existing wheel to the axle.
- Carefully remove the retaining pin or unfasten the bolt using appropriate tools (e.g., pliers, wrench).
- Slide the old wheel off the axle. Note the orientation of any washers or spacers for correct reassembly.
- Ṣe ayẹwo Axle naa: Clean the axle thoroughly and inspect it for any damage, bends, or excessive wear. Replace the axle if necessary.
- Fi Kẹ̀kẹ́ Tuntun Sílẹ̀:
- Slide the new Rubbermaid 1315-L3 replacement wheel onto the axle, ensuring any washers or spacers are placed in their original positions.
- Align the hole in the wheel hub with the hole in the axle.
- Insert the retaining pin or re-insert and tighten the bolt to secure the wheel. Ensure it is firmly seated and cannot come loose during operation.
- Ṣe idanwo fifi sori ẹrọ: Gently lower the tilt truck to the ground. Push and pull the truck to verify that the new wheel rotates freely and is securely attached. Check for any wobbling or unusual noises.
5. Awọn ero ṣiṣe
Once the replacement wheel is installed, the tilt truck can be operated as usual. Ensure that the load capacity of the truck is not exceeded, and always distribute weight evenly to prevent undue stress on the wheels and frame.
6. Itọju
Regular maintenance helps extend the life of your replacement wheel and ensures optimal performance of your tilt truck.
- Ninu: Periodically clean the wheel and axle area to remove dirt, debris, and tangled materials that could impede rotation.
- Ayewo: Regularly inspect the wheel for signs of wear, cracks, or damage. Check the axle and retaining pin for security and integrity.
- Lubrication: If the wheel hub or axle assembly includes grease fittings or requires lubrication, follow the original tilt truck manufacturer's recommendations for lubrication frequency and type.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Wheel does not spin freely | Debris caught in axle; axle bent; insufficient lubrication; wheel installed incorrectly. | Clean axle area; inspect and replace axle if bent; lubricate if applicable; re-install wheel correctly. |
| Wheel wobbles | Loose retaining pin/bolt; damaged wheel hub; bent axle. | Tighten retaining pin/bolt; inspect wheel for damage and replace if necessary; inspect and replace axle if bent. |
| Ariwo dani nigbati isẹ | Lack of lubrication; damaged bearings (if applicable); debris. | Lubricate wheel; inspect bearings and replace if damaged; clean wheel area. |
8. Awọn pato
- Awoṣe: 1315-L3
- Brand: Rubbermaid
- Iwọn Kẹkẹ: 12 inches (Iwọn ila opin)
- Ìwọ̀n Nkan: Ni isunmọ 10.87 poun
- Irú Iṣẹ́ Ọkọ́: Tilt Truck (specifically Rubbermaid 1315 Tilt Truck)
- UPC: 086876139433
9. atilẹyin ọja Information
This Rubbermaid product is covered by the manufacturer's standard warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation provided with your original Rubbermaid Tilt Truck or visit the official Rubbermaid webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.
10. Onibara Support
For technical assistance, replacement parts, or further inquiries, please contact Rubbermaid customer support. You can typically find contact information on the official Rubbermaid webaaye tabi nipasẹ alagbata ti o ti ra ọja naa.
Awọn orisun Ayelujara: www.rubbermaid.com
