Cherub WST-500A Chromatic Tuner User Manual

1. Ifihan

Thank you for choosing the Cherub WST-500A Chromatic Tuner. This compact and versatile digital tuner is designed for accurate tuning of various musical instruments, including violin and guitar. It features multiple tuning modes to suit your needs. Please read this manual thoroughly to understand the tuner's functions and ensure optimal performance.

2. Alaye Aabo

To prevent damage to the device or injury to yourself or others, please observe the following safety precautions:

• Do not expose the tuner to extreme temperatures, direct sunlight, high humidity, or corrosive environments.
• Avoid dropping the tuner or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the tuner. Refer all servicing to qualified personnel.
• Use only the specified battery type (2 x AAA batteries). Ensure correct polarity when installing batteries.
• Remove batteries if the tuner will not be used for an extended period to prevent leakage.
• Jeki awọn batiri kuro ni arọwọto awọn ọmọde. Ti o ba gbe, wa itọju ilera lẹsẹkẹsẹ.

3. Ọja Ipariview

The Cherub WST-500A features a clear LCD display and intuitive controls for easy operation.

olusin 1: Iwaju view of the Cherub WST-500A Chromatic Tuner, showing the display, control buttons, speaker, and microphone.

Awọn iṣakoso ati Awọn ẹya:

• Ifihan LCD: Shows note name, tuning accuracy, and mode indicators.
• Bọtini TAN/PA: Powers the tuner on or off.
• AUTO/ITEM Button: Switches between Automatic tuning mode and specific instrument presets (Guitar, Violin).
• FLAT/SOUND Button: In tuning mode, adjusts flat settings. In sound mode, cycles through reference tones.
• Bọtini Afọwọṣe: Activates Manual tuning mode.
• UP/DOWN Buttons (Manual): Used to select notes in Manual mode or adjust settings.
• Gbohungbohun ti a ṣe sinu rẹ (MIC): Detects instrument sound for tuning.
• Agbọrọsọ: Emits reference tones in Sound mode.
• Duro: Integrated stand on the back for upright positioning.

4. Eto

4.1 Fifi sori batiri

1. Wa ibi ipamọ batiri naa ni ẹhin atunto naa.
2. Ifaworanhan ṣii ideri kompaktimenti batiri.
3. Insert two (2) AAA batteries, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
4. Pa ideri batiri naa ni aabo.

4.2 Titan / Pa a

• To turn the tuner ON, press the TAN/PA bọtini. Ifihan naa yoo tan imọlẹ.
• To turn the tuner OFF, press and hold the TAN/PA bọtini fun isunmọ 2 aaya.

5. Awọn ilana Iṣiṣẹ

5.1 Àwọn Ìgbésẹ̀ Àtúnṣe

The WST-500A offers three primary tuning modes:

• Ipo Aifọwọyi: The tuner automatically detects the note being played. This is the default mode.
• Ipo afọwọṣe: Allows you to manually select the target note for tuning.
• Ipo Ohun: The tuner plays a reference tone for you to tune by ear.

5.2 Chromatic Tuning (Automatic Mode)

1. Turn on the tuner. It will typically start in Automatic Chromatic mode.
2. Play a single note on your instrument. Hold the note steadily.
3. The tuner's display will show the detected note name.
4. Adjust your instrument until the needle on the display is centered and the indicator light turns green.
5. If the needle is to the left, the note is flat; tighten the string. If the needle is to the right, the note is sharp; loosen the string.

5.3 Instrument Presets (Guitar/Violin)

The tuner includes specific presets for Guitar and Violin, which can simplify tuning for these instruments.

1. Turn on the tuner.
2. Tẹ awọn AUTO/ITEM button repeatedly to cycle through the available instrument modes (Chromatic, Guitar, Violin). The selected instrument will be indicated on the display.
3. In Guitar or Violin mode, play the desired string. The tuner will display the target note for that string and guide you to tune it.
4. Tune your instrument until the display indicates the correct pitch (centered needle, green light).

5.4 Ipo Afowoyi

Use Manual mode when you need to tune to a specific note or if the automatic detection is challenging.

1. Turn on the tuner.
2. Tẹ awọn Afọwọṣe button to enter Manual mode.
3. Lo awọn UP ati SILE buttons to select your desired target note.
4. Play the corresponding note on your instrument and adjust until the display indicates accurate tuning.

5.5 Ipo Ohun

Sound mode provides an audible reference tone for tuning by ear.

1. Turn on the tuner.
2. Tẹ awọn FLAT/SOUND button to enter Sound mode.
3. Tẹ awọn FLAT/SOUND button again to cycle through the available reference tones (e.g., A4, B4, C5).
4. Listen to the reference tone and tune your instrument's corresponding string to match the pitch.

Figure 2: The Cherub WST-500A Tuner shown in a hand, illustrating its compact and portable design (approximately 3.9 inches / 9 cm in height).

6. Itọju

Proper care will extend the life of your Cherub WST-500A tuner.

• Clean the tuner with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• If the tuner will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
• Tọju tuner ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.

7. Laasigbotitusita

If you encounter issues with your tuner, refer to the following table:

8. Awọn pato

• Ibiti Tuning: Db (69.296Hz) - d3 (1174.66Hz)
• Awọn ọna Iyipada: Chromatic, Guitar, Violin
• Ọna Iwari: Gbohungbohun
• Agbara: 2 x AAA batiri
• Awọn iwọn: Isunmọ 5.8 x 2.7 x 0.9 inches (14.7 x 6.9 x 2.3 cm)
• Ìwúwo: Approximately 3.2 ounces (90 grams) (without batteries)

9. Atilẹyin ọja ati Support

Cherub products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your local Cherub distributor or retailer. For technical support or further inquiries, please visit the official Cherub webojula tabi kan si wọn onibara iṣẹ Eka.

Jọwọ ṣe idaduro ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.