Ọrọ Iṣaaju
Thank you for choosing the Bobrick B-398 Medicine Cabinet. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before installation and retain them for future reference.
Alaye Aabo
- Always ensure power is disconnected before working near electrical outlets or wiring, if applicable.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE) gẹgẹbi awọn gilaasi ailewu ati awọn ibọwọ lakoko fifi sori ẹrọ.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the cabinet and its contents.
- Jeki awọn ẹya kekere ati awọn ohun elo iṣakojọpọ kuro lọdọ awọn ọmọde lati ṣe idiwọ awọn eewu gige.
- Handle glass components (mirror) with care to avoid breakage and injury.
Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- Bobrick B-398 Medicine Cabinet Assembly
- Adjustable Shelves (Quantity: As specified for model)
- Mounting Hardware (Screws, anchors, etc.)
- Awoṣe fifi sori ẹrọ (ti o ba wa pẹlu)
Figure 1: Bobrick B-398 Medicine Cabinet. This image shows the cabinet with its mirrored door slightly open, revealing the interior storage shelves. The cabinet is designed for recessed mounting.
Eto ati fifi sori
Awọn irinṣẹ ti a beere:
- Teepu Idiwọn
- Ikọwe
- Ipele
- Lu pẹlu awọn ege liluho ti o yẹ
- Screwdriver (Phillips or Flathead, as needed)
- Stud Finder (recommended for wall mounting)
Recessed Mount Installation (Wall Mount)
- Mura Ṣii silẹ: For recessed mounting, a rough opening in the wall is required. The dimensions for the rough opening should be slightly larger than the cabinet's recessed body dimensions. Refer to the specifications section for exact dimensions. Ensure there are no electrical wires or plumbing in the wall cavity where the cabinet will be installed.
- Ipo: Determine the desired height and location for the cabinet. Use a level to mark the precise outline of the rough opening on the wall.
- Ge Ṣii silẹ: Carefully cut the marked opening in the drywall or plaster. If cutting into studs, ensure proper framing is added to support the cabinet.
- Insert Cabinet: Gently slide the cabinet body into the prepared wall opening. Ensure the front flange of the cabinet sits flush against the wall surface.
- Àpótí Ààbò: Use the provided mounting screws to secure the cabinet to the wall studs or framing through the pre-drilled holes inside the cabinet. Ensure the cabinet is level and plumb before tightening all screws.
- Fi sori ẹrọ Awọn apoti: Insert the adjustable shelves into the desired positions using the shelf clips or supports provided.
Awọn ilana Iṣiṣẹ
Opening and Closing the Door:
The Bobrick B-398 features a swing-out door. To open, gently pull the door handle or edge. To close, push the door until it is fully seated and flush with the cabinet frame.
Awọn selifu ti n ṣatunṣe:
The cabinet includes adjustable shelves. To reposition a shelf, carefully lift it from its current supports, move the supports to the desired height, and then re-insert the shelf. Ensure shelves are securely seated before placing items on them.
Itoju
Ninu Igbimọ Ile-igbimọ:
- Ipari Irin Alagbara: Mu awọn oju ilẹ pẹlu asọ, damp cloth and a mild, non-abrasive cleaner. For stubborn spots, use a stainless steel cleaner. Always wipe in the direction of the grain. Avoid abrasive pads or harsh chemicals.
- Digi: Clean the mirror with a glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into edges.
- Gbogboogbo: Regularly dust the interior and exterior of the cabinet. Ensure the cabinet remains dry to prevent rust, especially in humid bathroom environments.
Awọn ayewo:
Periodically check all mounting screws to ensure they are tight. Inspect hinges for smooth operation and lubricate if necessary with a silicone-based lubricant.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Door does not close flush. | Àwọn ìdè tí kò tọ́ tàbí ìdènà. | Check hinges for tightness and alignment. Remove any obstructions. |
| Cabinet feels loose on wall. | Awọn skru iṣagbesori jẹ alaimuṣinṣin. | Tighten all mounting screws. Ensure cabinet is properly secured to wall studs/framing. |
| Shelves are wobbly. | Shelves not seated correctly on clips. | Ensure shelf clips are fully inserted and shelves are resting securely on them. |
Awọn pato
- Brand: Bobrick
- Awoṣe: B-398
- Awọn iwọn ọja: 5"D x 17"W x 27"H
- Ṣii odi ti o ni inira: Approximately 15-3/4" W x 25-3/4" H x 3-3/4" D (Note: Always measure actual unit for precise rough opening.)
- Ìwọ̀n Nkan: 32 iwon
- Iru fifi sori: Recessed Oke
- Ara ilekun: Swing Out
- Pari Iru: Irin ti ko njepata
- Ẹya Pataki: ipata sooro
- Awọn eroja to wa: Awọn selifu
- Awọn lilo ti a ṣe iṣeduro: Baluwe ẹya ẹrọ
- Àwọ̀: Pupa (Note: Color may vary by specific product variant.)
- ASIN: B005LTM9G8
- Ọjọ Akọkọ Wa: Oṣu Kẹta Ọjọ 24, Ọdun 2010
Atilẹyin ọja ati Support
For warranty information and customer support, please refer to the official Bobrick webojula tabi kan si wọn onibara iṣẹ Eka. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Bobrick Contact Information:
- Webojula: www.bobrick.com
- Iṣẹ onibara: Tọkasi si webAaye fun awọn alaye olubasọrọ agbegbe.
