Teknetics T2LTD-BLK Special Edition Metal Detector User Manual

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.

Alaye Aabo pataki

• Always exercise caution when digging to avoid underground utilities or hazardous objects.
• Do not operate the detector in thunderstorms or severe weather conditions.
• Keep the control housing dry. The search coils are waterproof, but the control housing is not.
• Lo awọn batiri ti a ṣe iṣeduro nikan.
• This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.

Ọja irinše

Your Teknetics T2LTD-BLK package includes the following main components:

• Control Housing with Display
• Oke yio
• Isalẹ Isalẹ
• Armrest
• 11-inch DD Waterproof Search Coil
• 5-inch DD Waterproof Search Coil
• Coil Mounting Bolt and Washers

Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.

Eto ati Apejọ

1. So Okun Iwadi naa:

   Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.

2. Assemble the Stems:

   Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.

3. Gbe Ile Iṣakoso naa:

   Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
4. So okun okun naa pọ:

   Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.

5. Fi Awọn batiri sii:

   The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.

Aworan: Isunmọ view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.

Awọn ilana Iṣiṣẹ

Titan / Paa

To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.

Basic Operation Modes

• All Metal Mode: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
• Ipo iyasoto: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.

Awọn Eto bọtini

• Ifamọ: Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
• Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
• Iwontunwonsi ilẹ: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
• Nọmba Awọn ohun orin: Selects the audio tone response for different target IDs.

Trigger-Actuated Pinpointing

To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.

Itọju ati Itọju

• Ninu: Nu ẹrọ wiwa naa kuro pẹlu ipolowoamp Aṣọ lẹ́yìn lílo kọ̀ọ̀kan. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun olómi.
• Ibi ipamọ: Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
• Coil Care: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
• Rirọpo Batiri: Rọpo awọn batiri nigbati itọka batiri kekere ba han loju iboju.

Laasigbotitusita

Awọn pato

Alaye atilẹyin ọja

Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Onibara Support

For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics webojula tabi nipasẹ rẹ ni aṣẹ onisowo.

Official Teknetics Webojula: Teknetics Store on Amazon