Ìwé Ìtọ́sọ́nà Olùlò Ètò Agbọ́hùnsọ Legrand On-Q MS3651 6.5-Inch In-Winch

1. Ifihan

Thank you for choosing the Legrand On-Q MS3651 6.5-inch In-Wall Speaker System. These speakers are designed for multi-room audio installations, offering high-efficiency sound reproduction. Featuring blue mica fiber woofers and silver mylar tweeters, they deliver excellent sound quality and a smooth frequency response for an immersive audio experience in your home or office environment.

2. Alaye Aabo pataki

Please read all safety instructions before installation and use.

• A ṣe iṣeduro fifi sori Ọjọgbọn: Installation of in-wall speakers requires knowledge of electrical wiring and building codes. If you are unsure, consult a qualified electrician or audio installer.
• Agbara Pa: Always disconnect power to the circuit before performing any installation or wiring.
• Asopọmọra: Use appropriate gauge speaker wire for your installation length to prevent signal loss and ensure safe operation. Ensure all connections are secure and insulated.
• Iduroṣinṣin Igbekale: Verify that the wall structure can support the weight of the speakers and that there are no electrical wires, plumbing, or other obstructions behind the intended mounting location.
• Afẹfẹ: Ensure adequate air circulation around any connected audio equipment (amplifier/receiver) to prevent overheating.
• Ọrinrin: Do not install speakers in areas prone to excessive moisture or direct water exposure, as these speakers are not waterproof.

3. Package Awọn akoonu

Your Legrand On-Q MS3651 speaker system package should contain the following items:

• One pair (2 speakers) of Legrand On-Q 3000 Series 6.5-inch In-Wall Speakers.
• Two paintable speaker grilles.

Image: Two Legrand On-Q in-wall speakers with their paintable grilles installed, ready for integration into a wall.

4. Itọsọna fifi sori ẹrọ

4.1. Awọn irinṣẹ ti a beere

• Oluwari okunrinlada
• Drywall saw or utility knife
• Teepu wiwọn ati pencil
• Speaker wire (appropriate gauge)
• Waya strippers
• Screwdriver (ori Philips)
• Lílu (àṣàyàn, fún àwọn ihò atọ́kọ̀)

4.2. Aṣayan ipo

Careful placement is crucial for optimal sound performance. Consider the following:

• Wall Cavity: Ensure sufficient depth and clear space behind the wall surface.
• Awọn idilọwọ: Use a stud finder to locate studs, electrical wires, and plumbing. Avoid these areas.
• Agbegbe gbigbọ: Position speakers to create a balanced sound field in your primary listening area.

4.3. Gígé Ìṣíṣẹ́ náà

1. Using the provided template (if included) or the speaker's outer frame, carefully trace the cutout dimensions onto the wall at your chosen location.
2. Using a drywall saw or utility knife, carefully cut along the traced line. Ensure the cut is clean and precise.

4.4. Wiring awọn Agbọrọsọ

Aworan: Iwaju view of the in-wall speaker without the grille, showing the blue mica fiber woofer and silver mylar tweeter.

1. Run speaker wire from your amplifier/receiver to each speaker opening. Leave enough slack for easy connection.
2. Strip approximately 1/2 inch of insulation from the ends of the speaker wires.
3. So ebute rere (+) ti agbọrọsọ naa mọ ebute rere (+) ti agbọrọsọ naa amplifier, and the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier. Ensure correct polarity for all speakers in your system.
4. Securely fasten the wires into the speaker's spring-loaded or screw terminals.

4.5. Iṣagbesori awọn Agbọrọsọ

Image: An installed Legrand On-Q in-wall speaker seamlessly integrated into a modern living room wall, demonstrating its discreet design.

1. Carefully insert the speaker assembly into the wall opening.
2. Tighten the mounting screws located on the front baffle of the speaker. These screws will engage the dog-ear clamps that pivot out and secure the speaker to the drywall. Do not overtighten.

4.6. grille fifi sori

Once the speaker is securely mounted, align the paintable grille with the speaker frame and gently press it into place until it is flush with the wall surface. The grilles can be painted to match your wall color if desired.

5. Awọn ilana Iṣiṣẹ

After successful installation and connection to your amplifier or receiver, operating your Legrand On-Q in-wall speakers is straightforward:

1. Rii daju rẹ ampA ti tan lifier/receiver naa o si ti ṣeto si orisun titẹ sii to tọ.
2. Ṣatunṣe iwọn didun lori rẹ ampohun èlò ìfọkànsí/olùgbà sí ìpele ìgbọ́ran tí ó rọrùn.
3. Enjoy high-quality audio playback through your discreetly installed in-wall speakers.

6. Itọju

Your Legrand On-Q in-wall speakers require minimal maintenance to ensure long-lasting performance:

• Ninu: Use a soft, dry cloth to gently wipe dust from the speaker grilles and surrounding areas. Avoid using harsh chemicals or abrasive cleaners.
• Itọju Grille: If you have painted the grilles, handle them carefully to avoid chipping the paint. If repainting, ensure the paint is thin and does not clog the grille perforations, which could affect sound quality.
• Ayewo: Periodically check the speaker grilles for any damage or loose fit.

7. Laasigbotitusita

Ti o ba pade awọn ọran pẹlu awọn agbọrọsọ rẹ, tọka si awọn iṣoro ati awọn ojutu ti o wọpọ wọnyi:

8. Awọn pato

Below are the technical specifications for the Legrand On-Q MS3651 In-Wall Speakers:

9. Atilẹyin ọja ati Support

The Legrand On-Q MS3651 In-Wall Speaker System comes with a Lopin tabi Atilẹyin ọja ni kikun. For specific details regarding your warranty coverage, please refer to the warranty card included with your purchase or visit the official Legrand On-Q webojula.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Legrand On-Q customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe ọja rẹ.

Awọn orisun Ayelujara: Legrand On-Q Official Webojula