Ọja Pariview
The Timken 34000 Series single cone with a stamped steel cage is designed to pair with a single cup (outer ring, sold separately) to form a complete single tapered roller bearing. This assembly is engineered to effectively support both radial and axial loads in various applications. The cone assembly maintains its structural integrity without contracting or expanding within an operating temperature range of -54 to 120 degrees C (-65 to 250 degrees F). Constructed from Timken's high-alloy steel, it offers exceptional durability, heat tolerance, and resistance to deformation under heavy loads. The integrated stamped steel cage ensures proper spacing of the rollers, minimizing friction, vibration, and noise during operation. As a separable tapered roller bearing unit, its open design facilitates easy lubrication and precise adjustments. This single tapered roller bearing is ideal for high-load, moderate-speed applications, including automotive axle systems and conveyor systems in demanding industries such as mining, construction, and agriculture.
Key Awọn ẹya ara ẹrọ
- Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing.
- Supports both radial and axial loads between a rotating and non-rotating member.
- Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F).
- Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
- Open configuration for lubrication applied in place.
Eto ati fifi sori
Awọn sọwedowo fifi sori ẹrọ tẹlẹ
- Inspect the bearing for any signs of damage, such as nicks, burrs, or corrosion.
- Ensure that all mating components, including the shaft and housing bore, are thoroughly clean and free of any debris or burrs.
- Verify that the dimensions of the shaft and housing correspond to the bearing specifications.
Ilana fifi sori ẹrọ
- Clean all surfaces that will come into contact with the bearing.
- Apply a thin, even film of compatible lubricant to the bearing surfaces, especially the rollers and raceways.
- Using appropriate installation tools, press fit the cone (inner ring) onto the shaft. Avoid direct impact on the rollers or cage, which can cause damage.
- Install the cup (outer ring, sold separately) into the housing bore, ensuring it is seated squarely and fully.
- Carefully assemble the cone and cup, ensuring proper alignment.
- Adjust the bearing setting (end play or preload) according to the specific requirements of your application and equipment manufacturer's guidelines.
Awọn Itọsọna Isẹ
The Timken 34306 tapered roller bearing is engineered for reliable performance in high-load, moderate-speed applications. Adhering to the following guidelines will ensure optimal operation and longevity:
- This bearing is designed to effectively support both radial and axial loads, making it versatile for various mechanical systems.
- Maintain operating temperatures within the specified range of -54 to 120 degrees C (-65 to 250 degrees F) to prevent material degradation and ensure consistent performance.
- Proper and consistent lubrication is paramount for the bearing's optimal performance, reducing friction and extending its service life.
- Always operate the bearing within its specified load and speed limits to prevent premature wear and potential failure. Consult technical specifications for precise limits.
Itọju ati Lubrication
Lubrication
The Timken 34306 bearing features an open configuration, which means lubrication must be applied in place during installation and periodically throughout its service life.
- Lubricant tó báramu mu: Grease is the recommended lubricant for this bearing.
- Regularly inspect the condition of the lubricant. If it appears discolored, contaminated, or degraded, replenish or replace it immediately.
- Always use a high-quality grease that is suitable for tapered roller bearings and the specific operating environment (temperature, moisture, load).
Ayewo
- Periodically check the bearing for any visible signs of wear, such as pitting, spalling, or corrosion on the raceways and rollers.
- Listen for any unusual noise or vibration during operation, which can indicate a problem with lubrication, contamination, or damage.
- Ensure that the bearing setting (end play or preload) remains within the specified tolerances to prevent excessive wear or overheating.
Laasigbotitusita
This section provides guidance on common issues that may arise during the operation of your Timken 34306 Tapered Roller Bearing.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ariwo Pupọ | Lack of lubrication, improper installation, contamination, bearing damage. | Check and replenish lubrication. Re-install bearing correctly, ensuring proper alignment and setting. Clean or replace if contaminated or damaged. |
| Gbigbona pupọ | Insufficient lubrication, excessive load, improper bearing setting (too tight), misalignment. | Verify adequate lubrication. Reduce applied load if exceeding limits. Adjust bearing setting to recommended end play or preload. Correct misalignment. |
| Ti tọjọ Wear | Contamination (dirt, moisture), improper or insufficient lubrication, misalignment, excessive vibration. | Ensure clean operating environment. Use correct type and amount of lubricant. Correct misalignment. Address sources of excessive vibration. |
Imọ ni pato
Detailed specifications for the Timken 34306 Tapered Roller Bearing.
| Sipesifikesonu | Iye |
|---|---|
| Brand | TIMKEN |
| Nọmba awoṣe | 34306 |
| Ohun elo | Alloy Irin |
| Ti nso Iru | Tapered Roller Ti nso |
| Ìwọ̀n Ìwọ̀n Inú (ID) | 3.0625 inches |
| Ìbú | 0.9060 inches |
| Iwọn Nkan | 1.3 iwon (0.59 kilo) |
| Awọn iwọn otutu ti nṣiṣẹ | -54 si 120 iwọn C (-65 si 250 iwọn F) |
| Ibaramu lubricant | girisi |
| UPC | 053893268606 |
| Awọn iwọn Ọja (L x W x H) | 1 x 1 x 1 inches |
| Olupese Apá Number | 34306 |
Atilẹyin ọja ati Support
For detailed warranty information, technical assistance, or any product-related inquiries regarding your Timken 34306 Tapered Roller Bearing, please contact TIMKEN customer service directly or visit their official website. Timken is committed to providing high-quality products and support.
