Ọrọ Iṣaaju
Thank you for choosing the Sunlite TL-L200 Griplite Tail Light. This manual provides essential information for the proper installation, operation, and maintenance of your new tail light. Designed for enhanced visibility and safety, this light features bright LEDs and a durable, water-resistant silicone body. Please read this manual thoroughly before use and retain it for future reference.
Alaye Aabo
- Always ensure the tail light is securely mounted before riding.
- Do not look directly into the LED light as it may cause temporary vision impairment.
- While the light is water-resistant, avoid prolonged submersion.
- Regularly check battery life to ensure consistent performance.
- This light is intended to increase visibility to others; it does not replace the need for safe riding practices.
Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- 1 x Sunlite TL-L200 Griplite Tail Light
- 2 x CR2032 Lithium Batteries (pre-installed)
Ṣeto
Battery Installation (If not pre-installed or for replacement)
- Gently open the silicone casing láti wọ inú yàrá ìpamọ́ batiri náà.
- Insert two CR2032 lithium batteries, ensuring correct polarity (+/-).
- Close the silicone casing securely to maintain water resistance.
Iṣagbesori Light Iru
The Sunlite Griplite Tail Light features an integrated silicone mounting strap for versatile attachment.
- Identify a suitable mounting location on your bicycle, such as the seat post, seat stay, or rear rack. Ensure the light will be visible from the rear.
- Wrap the integrated silicone strap around the desired mounting point.
- Hook the end of the strap onto the designated tab on the light's body, pulling it taut to secure the light firmly in place.
- Adjust the light's angle to ensure optimal visibility.
Image: The Sunlite TL-L200 Griplite Tail Light securely mounted on a bicycle seat post, demonstrating its flexible silicone strap attachment.
Awọn ilana Iṣiṣẹ
The Sunlite TL-L200 Griplite Tail Light operates with a simple one-button control located on the top of the light.
Aworan: Iwaju view of the Sunlite TL-L200 Griplite Tail Light, highlighting the prominent power button on its top surface.
- Titan/Apapa: Press the button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
- Yi awọn ọna pada: With the light on, press the button repeatedly to cycle through the available lighting modes:
- Ipo iduro: Provides a continuous beam of red light for constant visibility.
- Ipo didan: Emits a pulsating red light, designed to attract attention and enhance safety.
Image: The Sunlite TL-L200 Griplite Tail Light illuminated in a dark environment, demonstrating its bright red light output and visibility.
Itoju
Ninu
To clean your tail light, wipe the silicone body and lens with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material or lens.
Batiri Rirọpo
When the light appears dim or stops functioning, it's time to replace the batteries. Refer to the "Battery Installation" section under "Setup" for detailed instructions. Always use two new CR2032 lithium batteries for optimal performance.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Awọn batiri ti o ku tabi fifi sori ẹrọ batiri ti ko tọ. | Replace batteries with new CR2032 cells, ensuring correct polarity. |
| Imọlẹ jẹ baibai. | Agbara batiri kekere. | Rọpo awọn batiri. |
| Ina flickers. | Asopọ batiri ti o ni alaimuṣinṣin tabi agbara batiri ti o kere. | Check battery compartment for secure fit; replace batteries if necessary. |
| Light falls off during ride. | Iṣagbesori ti ko tọ. | Ensure the silicone strap is pulled taut and securely hooked onto the tab. |
Awọn pato
- Awoṣe: Sunlite TL-L200 Griplite Tail Light (Part Number: 97525)
- Orisun Imọlẹ: 2 x Bright Nichia LEDs
- Orisun Agbara: 2 x CR2032 Lithium Batteries (included)
- Akoko Ṣiṣe: Up to 100 hours (depending on mode and battery quality)
- Awọn ọna: 1 Steady, 1 Flashing
- Ohun elo: Water-resistant Silicone Body
- Iru fifi sori: Integrated Silicone Strap (Seat Mount)
- Ìwọ̀n Nkan: To 0.94 iwon
- Awọn iwọn (LxWxH): Isunmọ 4.7 x 3.25 x 1.45 inches
- Ipele Resistance Omi: Omi sooro
- UPC: 072774975259
Atilẹyin ọja ati Support
Sunlite products are manufactured to high standards. For specific warranty information or technical support, please refer to the product packaging or visit the official Sunlite webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.
For further assistance, please contact Sunlite customer service through their official channels.
