Ọrọ Iṣaaju
This manual provides instructions for the installation, operation, and maintenance of the Sunlite Replacement 2-Hole Foot for Bike Cases. This component is designed to replace an existing foot on compatible Sunlite bike cases from the 2010-2013 model years, ensuring proper support and stability for your bike case.
Figure 1: Sunlite Replacement 2-Hole Foot
Please read this manual thoroughly before attempting any installation or maintenance to ensure safe and correct usage.
Eto ati fifi sori
The Sunlite Replacement 2-Hole Foot is intended for direct replacement of a damaged or missing foot on compatible Sunlite bike cases. Ensure your bike case model is compatible with this 2-hole foot design (models from 2010-2013).
Awọn irinṣẹ ti a beere:
- Appropriate screwdriver or wrench (depending on existing fastener type)
- New fasteners (if not included with the replacement foot and old ones are damaged)
Awọn igbesẹ fifi sori ẹrọ:
- Prepare the Bike Case: Place the bike case on a stable, flat surface. If replacing an existing foot, carefully remove the old foot by unscrewing any fasteners.
- Align the Replacement Foot: Position the new Sunlite Replacement 2-Hole Foot against the designated mounting area on the bike case. Ensure the two holes on the foot align perfectly with the mounting points on the case.
- Secure the Foot: Insert the appropriate fasteners (screws or bolts) through the holes in the replacement foot and into the bike case. Tighten the fasteners securely using your screwdriver or wrench. Do not overtighten, as this may damage the foot or the bike case.
- Jẹrisi Iduroṣinṣin: Once installed, gently test the stability of the bike case by placing it upright. Ensure the new foot provides firm and level support.
If you encounter any difficulty during installation, consult a professional bike mechanic or contact Sunlite customer support.
Awọn ilana Iṣiṣẹ
The Sunlite Replacement 2-Hole Foot functions as a static support component for your bike case. Once properly installed, no specific "operation" is required beyond ensuring the bike case is placed on a stable surface and the foot is not subjected to excessive lateral force or impact.
- Always place the bike case on a flat, stable surface to prevent tipping.
- Avoid dragging the bike case across rough surfaces, which can cause premature wear or damage to the foot.
Itoju
Regular maintenance will extend the lifespan of your Sunlite Replacement 2-Hole Foot and ensure the continued stability of your bike case.
- Ninu: Wipe the foot clean with a damp cloth as needed to remove dirt and debris. Avoid harsh chemicals that may degrade the material.
- Ṣayẹwo Fastener: Periodically inspect the fasteners securing the foot to the bike case. If they appear loose, gently tighten them. Do not overtighten.
- Ayẹwo ibajẹ: Regularly check the foot for any signs of cracks, excessive wear, or deformation. If significant damage is observed, replace the foot immediately to maintain the structural integrity of your bike case.
Laasigbotitusita
This section addresses common issues you might encounter with the Sunlite Replacement 2-Hole Foot.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Foot feels loose or wobbly. | Fasteners are loose. | Tighten the fasteners securely. |
| Foot is cracked or broken. | Ibajẹ ikolu tabi rirẹ ohun elo. | Replace the foot with a new Sunlite Replacement 2-Hole Foot. |
| Foot does not align with mounting holes. | Incorrect foot model or incompatible bike case. | Verify that your bike case is a compatible Sunlite model (2010-2013) and that you have the correct 2-hole replacement foot. |
Awọn pato
The following are the technical specifications for the Sunlite Replacement 2-Hole Foot:
- Brand: Sunlite
- Nọmba awoṣe: 96842
- Ìwọ̀n Nkan: 0.94 Poun (isunmọ 0.43 kg)
- Awọn Iwọn Nkan (LxWxH): 3.75 x 1.95 x 1.95 inches (isunmọ 9.53 x 4.95 x 4.95 cm)
- Ìwúwo Apo: 1.3 Poun (isunmọ 0.59 kg)
- Awọn Iwọn Idiwọn (LxWxH): 15 x 14 x 10 inches (isunmọ 38.1 x 35.56 x 25.4 cm)
- Olupese: Sunlite
- ASIN: B007BWREZY
- Ọjọ Akọkọ Wa: Oṣu Kẹta Ọjọ 22, Ọdun 2012
- Ibamu: Sunlite Bike Cases, 2010-2013 models with 2-hole foot design.
Alaye atilẹyin ọja
Specific warranty details for the Sunlite Replacement 2-Hole Foot are not provided in the product information. Please refer to the official Sunlite website or contact Sunlite customer service directly for current warranty policies and terms.
Onibara Support
For further assistance, technical support, or inquiries regarding the Sunlite Replacement 2-Hole Foot, please contact Sunlite customer service through their official channels. Contact information can typically be found on the Sunlite brand webaaye tabi apoti ọja.
Note: Always use genuine Sunlite replacement parts to ensure compatibility and maintain product integrity.
