Ìwé Ìtọ́sọ́nà Olùlò Látọwọ́dá Látọwọ́dá DISH211 fún Ẹ̀rọ 4

Ọrọ Iṣaaju

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DISH DISH211 4-Device Universal Remote. Designed for ease of use, this remote supports DISH TV receivers and can control up to four different devices, including TVs and other entertainment systems. Its ability to learn commands from original remotes makes it a versatile replacement.

Figure 1: The DISH DISH211 4-Device Universal Remote, showcasing apẹrẹ ergonomic rẹ ati ipilẹ bọtini.

Ṣeto

1. Fifi sori batiri

The DISH211 remote requires two (2) AA batteries for operation. To install:

1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
2. Gbe ideri batiri naa si isalẹ ki o gbe soke lati ṣii.
3. Fi awọn batiri AA meji sii, ki o rii daju pe awọn ebute rere (+) ati odi (-) ba awọn itọkasi inu yara naa mu.
4. Rọpo ideri batiri naa nipa gbigbe e soke titi ti yoo fi tẹ sinu ipo rẹ.

2. Device Pairing and Programming

The DISH211 remote can be programmed to control your DISH receiver and other devices. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication, depending on your receiver model.

Figure 2: Cover of the official DISH Remote User Guide, which provides detailed programming instructions.

For DISH Receiver Pairing (UHF/IR):

Some DISH receivers may require setting the remote's address and communication type (UHF or IR). A small switch near the battery compartment may allow selection between UHF and IR modes. Ensure this switch is set correctly for your receiver type.

To address the remote to your receiver:

1. Tẹ awọn Alaye eto button on the front of your receiver to access the system information screen.
2. Tẹ mọlẹ SAT button on the remote until all mode lights illuminate.
3. Enter a number between 1-15 on the remote keypad. This number corresponds to the TV-2 UHF address displayed on your receiver's screen.
4. Tẹ awọn # (pound) button once.
5. Tẹ awọn Gba silẹ bọtini ni igba mẹta.
6. Yan Ti ṣe on the system info screen and test the remote's functionality.

For Other Devices (TV, DVD, AUX):

The remote has a large code library and can learn commands from your original remotes. Refer to the official DISH remote user guide (often included with the product or available online) for specific programming codes and learning instructions for various brands and device types.

Figure 3: The back of the DISH remote packaging, indicating compatible DISH receiver models for both IR and IR/UHF configurations.

Awọn ilana Iṣiṣẹ

The DISH211 remote is designed for intuitive control of your entertainment system. It features backlit active MODE keys for visibility in low light conditions and dedicated DVR controls.

1. Aṣayan Ipo

Press the desired mode button (e.g., SAT for DISH receiver, TV for television, DVD for DVD player, AUX for auxiliary device) at the top of the remote to select the device you wish to control. The selected mode button will illuminate.

2. Awọn iṣakoso ipilẹ

• Agbara: Tẹ awọn AGBARA bọtini lati tan tabi pa ẹrọ ti a yan.
• Iwọn didun: Lo awọn Iwọn didun soke/isalẹ buttons to adjust the audio level of your television.
• Ikanni: Lo awọn Ikanni soke / isalẹ buttons to change channels on your DISH receiver or television.
• Pa ẹnu mọ́: Tẹ awọn IKU bọ́tìnì láti pa ohùn náà lẹ́nu mọ́.
• Iṣawọle: Tẹ awọn ÀWỌN Ọ̀RỌ̀ button to cycle through video inputs on your television.

3. DVR Controls

The remote includes dedicated buttons for DVR functionality:

• Igbasilẹ: Ó bẹ̀rẹ̀ sí í gba ìforúkọsílẹ̀ ètò ìsinsìnyí.
• Ṣiṣẹ/Daduro: Starts or pauses playback of recorded content or live TV.
• Duro: Duro ṣiṣiṣẹsẹhin.
• Dapada sẹhin/Siwaju Sare: Controls playback speed and direction.
• Skip Forward (DISH Skip Forward): Allows quick skipping through commercials or segments.
• Rekọja Pada: Skips backward in recorded content.

olusin 4: Isunmọ view of the DISH DISH211 remote, highlighting the central navigation and DVR control buttons.

Itoju

1. Batiri Rirọpo

When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

2. Ninu

To clean your remote, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using excessive liquid or harsh chemicals, as these can damage the remote's electronics or finish.

Laasigbotitusita

Latọna jijin Ko Dahun

• Ṣayẹwo awọn batiri: Rii daju pe awọn batiri ti fi sori ẹrọ daradara ati pe wọn ni idiyele ti o to. Rọpo ti o ba wulo.
• Ìlà Ìríran (IR): If using IR mode, ensure there is a clear line of sight between the remote and the device's IR receiver. Obstructions can block the signal.
• Aṣayan Ipo: Verify that the correct mode button (e.g., SAT, TV) is selected for the device you are trying to control.
• Remote Address/UHF-IR Switch: For DISH receivers, confirm the remote's address is correctly set and the UHF/IR switch (if present) matches your receiver's configuration. Incorrect settings can prevent communication.

Iṣẹ-ṣiṣe intermittent

• Ìjánu: Other electronic devices or strong light sources (like plasma TV IR interference) can sometimes interfere with IR signals. Try operating the remote from a different angle or location.
• DVR Directory Update: If experiencing lag or unresponsiveness with DVR functions, ensure your DVR's directory is updated. Consult your DISH receiver's manual for instructions on updating its software or directory.

Awọn bọtini ko ṣiṣẹ

• Latọna jijin mimọ: Dirt or debris under buttons can cause them to stick or become unresponsive. Clean the remote as described in the Maintenance section.
• Àtúntò ètò: If specific buttons for a device are not working, the remote may need to be reprogrammed for that device.

Awọn pato

Atilẹyin ọja ati Support

Alaye atilẹyin ọja

The DISH DISH211 Universal Remote typically comes with a Atilẹyin ọja to lopin 90-ọjọ. Please refer to the documentation enclosed with your product for specific terms, conditions, and details regarding warranty claims.

Onibara Support

For further assistance with programming, troubleshooting, or general inquiries, it is recommended to consult the official DISH Network support resources. This may include their website, online user guides, or customer service contact information. The manufacturer of this product is Audiovox Accessories Corporation.