Ìwé Ìtọ́sọ́nà Olùlò Infrared Motion Detector Goobay 95175

1. Ọja Ipariview

The Goobay 95175 is a wall-mounted infrared motion detector designed for both indoor and outdoor applications. It features a 180-degree detection area and a range of up to 12 meters, making it suitable for automatically switching lights, lamps, and LEDs. Its IP44 rating ensures protection against splashing water, allowing for reliable operation in outdoor environments.

This sensor accurately detects the movement of people and animals, particularly effective in darkness or low-light conditions. The sensor head is rotatable and tiltable, enabling optimal adjustment of the detection area to suit specific requirements.

Image 1: Goobay 95175 Infrared Motion Detector. This image shows the white, wall-mounted motion detector with its adjustable sensor lens and control knobs for time and light sensitivity.

2. Awọn ilana aabo

• Aabo Itanna: Onímọ̀ ẹ̀rọ iná mànàmáná tó mọṣẹ́ gbọ́dọ̀ ṣe iṣẹ́ ìfisílé àti ìtọ́jú rẹ̀ ní ìbámu pẹ̀lú àwọn òfin àti ìlànà iná mànàmáná agbègbè.
• Ge asopọ agbara: Always disconnect power to the circuit at the main fuse box or circuit breaker before performing any installation, wiring, or maintenance.
• Voltage: Rii daju pe iṣẹ voltage of 230V (AC) is correctly supplied.
• Idiwon IP44: The device is protected against splashing water (IP44). Do not immerse in water or expose to direct high-pressure water jets.
• Iṣagbesori: Mount the device securely to a stable surface.
• Awọn ọmọde: Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde.

3. Awọn ẹya Ọja

• Igun Wiwa: 180 iwọn.
• Ibi idanimọ: Titi di mita 12.
• Kilasi Idaabobo: IP44 (splash-proof), suitable for outdoor use.
• Atunse sensọ: Rotatable and tiltable sensor head for precise area coverage.
• Ifamọ Imọlẹ: A le ṣatunṣe lati 3 lux (òkunkun) si 2000 lux (imọlẹ ọsan).
• Iye akoko iṣẹ: Adjustable from 10 seconds to 420 seconds (7 minutes).
• Agbara Yipada: Maximum 300W, minimum 1W.
• Awọn ọna Voltage: 230V (AC).
• Giga fifi sori ẹrọ: Recommended between 1.8 meters and 2.5 meters.

4. Eto ati fifi sori

This motion detector is designed for surface wall mounting. Ensure the mounting location is stable and provides the desired detection coverage.

4.1 Mounting Location Considerations

• Avoid mounting near heat sources (e.g., vents, direct sunlight) that could cause false triggers.
• Do not point the sensor directly at moving objects like trees or busy roads if not desired.
• The recommended installation height is between 1.8 m and 2.5 m for optimal performance.

4.2 Awọn itọnisọna Wiring

1. Ge Agbara: Pa ipese agbara akọkọ si agbegbe fifi sori ẹrọ ni fifọ Circuit.
2. Mura Awọn okun waya: Strip the insulation from the electrical wires (Live, Neutral, Load) according to standard electrical practices.
3. So awọn onirin: Use the screw terminals inside the detector to connect the wires. Typically:
   • Connect the Live (L) wire from the power supply to the Live terminal on the detector.
   • Connect the Neutral (N) wire from the power supply to the Neutral terminal on the detector.
   • Connect the Load (L') wire (to the light fixture) to the Load terminal on the detector.
4. Asopọmọra to ni aabo: Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
5. Oluwadi Oke: Secure the detector to the wall using appropriate screws and anchors.
6. Pada Agbara pada: Nígbà tí a bá ti parí ìfisílẹ̀ àti ìwádìí, dá agbára padà sí àyíká náà.

5. Awọn ilana Iṣiṣẹ

The Goobay 95175 motion detector features adjustable settings for light sensitivity and operating duration.

5.1 Adjusting Light Sensitivity (LUX)

The 'LUX' knob controls the ambient light level at which the detector becomes active. Rotate the knob:

• Towards the 'moon' symbol (lower lux value) for activation only in darker conditions (e.g., night).
• Towards the 'sun' symbol (higher lux value) for activation in brighter conditions (e.g., twilight or even daylight).

5.2 Adjusting Operating Duration (TIME)

The 'TIME' knob sets how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the knob:

• Towards '-' for a shorter duration (minimum 10 seconds).
• Towards '+' for a longer duration (maximum 420 seconds / 7 minutes).

5.3 Adjusting Sensor Angle

The sensor head can be manually rotated and tilted to precisely define the detection area. Adjust the sensor to cover the desired zone and avoid unwanted triggers.

6. Itọju

The Goobay 95175 motion detector requires minimal maintenance.

• Ninu: Periodically wipe the sensor lens with a soft, dry cloth to remove dust or dirt that might obstruct detection. Do not use abrasive cleaners or solvents.
• Ayewo: Regularly check the device for any signs of damage or loose connections.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Goobay customer service directly. Keep your proof of purchase for any warranty claims.

Olupese: Wentronic GmbH