1. Ọja Ipariview
The TFA Dostmann 30.1048 is a digital probe thermometer designed for accurate temperature measurement of liquids, powdered, and plastic substances. It features a long probe and a clear digital display, making it suitable for various applications, including food preparation and industrial use. This thermometer is splash-proof (IP55 rated) and includes an automatic shut-off function to conserve battery life.
Figure 1: TFA Dostmann 30.1048 Digital Probe Thermometer. This image shows the full view of the thermometer with its long stainless steel probe and digital display.
2. Eto
2.1. Fifi sori batiri
The thermometer requires one LR44 battery (included). To install or replace the battery:
- Locate the battery compartment cover on the back of the thermometer's head.
- Use a small coin or screwdriver to gently twist and open the cover.
- Insert the LR44 battery with the positive (+) side facing up.
- Rọpo ideri apoti batiri naa ki o si yi i pada lati le daabobo rẹ.
2.2. Lilo akọkọ
Before first use, remove any protective film from the display and the probe. Clean the probe according to the maintenance instructions.
3. Awọn ilana Iṣiṣẹ
3.1. Agbara Tan / Paa
- To turn the thermometer on, press the TAN/PA bọtini.
- To turn the thermometer off, press the TAN/PA bọtini lẹẹkansi.
- The thermometer features an automatic shut-off function, which will turn off the device after approximately 45 minutes of inactivity to conserve battery life.
3.2. Gbigbe Iwọn kan
- Tan thermometer.
- Carefully insert the stainless steel probe into the substance you wish to measure. Ensure the probe is inserted at least 2 cm (approximately 0.8 inches) into the medium for accurate readings.
- Wait a few seconds for the temperature reading on the digital display to stabilize. The thermometer has a fast response time, typically under 1 second for updates.
- Read the temperature displayed in degrees Celsius ( C).
Figure 2: Proper insertion of the probe for temperature measurement. The image shows a hand holding the thermometer, with the probe inserted into a dark surface, likely an engine compartment, demonstrating its versatility beyond kitchen use.
3.3. Temperature Range and Accuracy
The thermometer measures temperatures within the range of -50 C to +300 C (-58 F to +572 F).
Accuracy specifications:
- 1 C ( 1.8 F) for temperatures between -10 C and +100 C (14 F to 212 F).
- 2 C ( 3.6 F) for temperatures between -50 C and -10 C (-58 F to 14 F) and between +100 C and +200 C (212 F to 392 F).
- 3 C ( 5.4 F) for temperatures above +200 C (392 F).
4. Itọju
4.1. Ninu
To ensure hygiene and prolong the life of your thermometer:
- Clean the stainless steel probe thoroughly with a damp asọ ati ìwọnba detergent lẹhin ti kọọkan lilo.
- Do not immerse the main body of the thermometer in water, as it is only splash-proof (IP55 rated), not waterproof.
- Fi aṣọ rírọ̀ tí ó gbẹ nu ìbòjú àti ara rẹ̀.
- Ensure the probe is completely dry before storing.
4.2. Ibi ipamọ
Store the thermometer in a clean, dry place. Use the included plastic protective sheath for the probe to prevent damage and ensure safety.
5. Laasigbotitusita
5.1. Wọpọ Oran ati Solusan
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan ti ṣofo tabi baibai. | Kekere tabi okú batiri. | Replace the LR44 battery. |
| Awọn kika ti ko pe. | Probe not inserted deep enough; probe tip is dirty; extreme temperature fluctuations. | Ensure probe is inserted at least 2 cm; clean the probe thoroughly; allow thermometer to acclimate to ambient temperature before use. |
| Iwọn otutu ko tan. | Battery incorrectly installed; battery dead. | Check battery orientation; replace battery. |
6. Awọn pato
- Nọmba awoṣe: 30.1048
- Iwọn otutu: -50 C to +300 C (-58 F to +572 F)
- Yiye: 1 C (-10 to 100 C), 2 C (-50 to -10 C / 100 to 200 C), 3 C (>200 C)
- Gigun Iwadii: 140 mm (isunmọ. 5.5 inches)
- Orisun Agbara: 1 x LR44 battery (included)
- Awọn iwọn (L x W x H): 23.5 x 1.7 x 2.49 cm (isunmọ. 9.25 x 0.67 x 0.98 inches)
- Ìwúwo: 22.68 giramu (nǹkan bíi 0.8 ounces)
- Ohun elo: Plastic (body), Stainless Steel (probe)
- Ẹya Pataki: Automatic shut-off, Splash-proof (IP55)
- HACCP Compliant: Bẹẹni
7. Atilẹyin ọja ati Support
7.1. atilẹyin ọja Information
This product typically comes with a 1-year availability of spare parts. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the manufacturer directly.
7.2. Onibara Support
For further assistance, technical support, or inquiries regarding your TFA Dostmann 30.1048 thermometer, please contact TFA customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu apoti ọja rẹ.
