Intermec PB22 Direct Thermal Portable Printer User Manual

1. Ifihan

The Intermec PB22 Direct Thermal Portable Printer is a rugged, compact mobile device designed for on-the-go label and receipt printing. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB22 printer, ensuring optimal performance and longevity.

This image displays the Intermec PB22 Direct Thermal Portable Printer, a compact and rugged mobile device. A thermal label with a barcode and text is shown exiting the printer's front slot, indicating its primary function for label and receipt printing. The printer features a dark gray and black casing with a blue indicator light on the side.

2. Alaye Aabo

Please read all safety instructions before using the printer to prevent injury or damage to the device.

• Do not expose the printer to extreme temperatures, direct sunlight, or high humidity.
• Use only Intermec-approved power adapters and batteries.
• Keep the printer away from liquids. If liquid enters the device, disconnect power immediately.
• Do not attempt to disassemble or modify the printer. Refer all servicing to qualified personnel.
• Rí i dájú pé afẹ́fẹ́ ń yọ́ dáadáa nígbà tí a bá ń ṣiṣẹ́ àti nígbà tí a bá ń gba agbára.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Intermec PB22 Portable Printer Unit
• Batiri gbigba agbara
• Adaparọ Agbara AC
• Okun USB
• Quick Start Guide or Documentation
• Sample Roll of Thermal Media (may vary by region)

4. Eto

4.1. Unpacking

Carefully remove the printer and all accessories from the packaging. Retain the packaging for future storage or shipping.

4.2. Ngba agbara si Batiri naa

1. Insert the rechargeable battery pack into the battery compartment on the printer, ensuring it clicks into place.
2. Connect the AC power adapter to the printer's power port.
3. Plug the power adapter into a wall outlet. The charging indicator light will illuminate.
4. Allow the battery to fully charge before first use (approximately 2-4 hours).

4.3. Loading Thermal Media

1. Open the media cover latch and lift the cover.
2. Place the thermal media roll into the media compartment, ensuring the print side faces the print head.
3. Pull a small amount of media out past the print head and align it with the media guides.
4. Close the media cover firmly until it latches.

4.4. Asopọmọra

The PB22 printer supports USB and Bluetooth connectivity.

Asopọ USB:

• Connect one end of the USB cable to the printer's USB port.
• Connect the other end to your host device (e.g., computer, smartphone with appropriate adapter).
• Install the necessary drivers or applications as prompted by your operating system or device.

Asopọ Bluetooth:

• Ensure Bluetooth is enabled on your host device (e.g., smartphone, tablet).
• Turn on the PB22 printer.
• On your host device, search for available Bluetooth devices. The PB22 should appear in the list.
• Select the PB22 and follow the pairing instructions. You may be prompted for a PIN (default is usually 0000 or 1234).

4.5. App Installation (for Android Devices)

For control via an Android device, download and install the appropriate Intermec printing application from your device's app store or Intermec's official support website. This app will facilitate printing and configuration.

5. Ṣiṣẹ itẹwe

5.1. Agbara lori / Paa

• To power on: Press and hold the power button until the indicator light illuminates.
• To power off: Press and hold the power button until the indicator light turns off.

5.2. Ipilẹ Printing

1. Ensure the printer is powered on and connected to your host device (via USB or Bluetooth).
2. Open the document or application from which you wish to print (e.g., a label design software, a mobile app).
3. Yan aṣayan titẹ laarin ohun elo naa.
4. Choose the Intermec PB22 as your printer.
5. Confirm print settings (e.g., number of copies, label format) and initiate the print job.

5.3. Awọn afihan ipo

The printer features indicator lights that provide information about its status:

• Alawọ ewe ri to: Printer is on and ready.
• Alawọ ewe didan: Data is being received or processed.
• Pupa ti o lagbara: Error condition (e.g., out of paper, print head open).
• Pupa didan: Batiri kekere.
• Ri to Blue: Bluetooth ti sopọ.

6. Itọju

6.1. Ninu awọn Print Head

Regular cleaning of the print head ensures optimal print quality. Use a lint-free cloth dampened pẹlu isopropyl oti.

1. Pa ẹ̀rọ ìtẹ̀wé náà kí o sì yọ ohun tí ń darí agbára kúrò.
2. Ṣii ideri media.
3. Gently wipe the print head surface from center to edge.
4. Allow the print head to dry completely before closing the cover and powering on.

6.2. Ninu Ode

Mu ese ita ti itẹwe pẹlu asọ, damp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.

6.3. Itọju batiri

• Yago fun gbigba agbara si batiri ni kikun nigbagbogbo.
• Store the printer with a partially charged battery if not used for extended periods.
• Replace the battery if its capacity significantly diminishes.

6.4. Ibi ipamọ

Store the printer in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for a long period, remove the battery.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

For information regarding warranty coverage, technical support, and service options for your Intermec PB22 printer, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) support website. You can typically find drivers, firmware updates, and detailed user guides there.

For direct assistance, contact Intermec/Honeywell customer support through their official channels.