Ìwé Ìtọ́sọ́nà Olùlò fún Módù Ìfẹ̀síwájú JOHNSON

1. Ifihan

This manual provides essential information for the installation, operation, and maintenance of the Johnson Controls LP-XP91D05-000C Expansion Module. This module is designed to expand control system capabilities by adding 8 digital inputs and is suitable for DIN rail mounting in industrial environments. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

2. Alaye Aabo

Ikilọ: Installation and servicing must be performed by qualified personnel only. Disconnect all power before working on the module or connected equipment. Failure to follow these instructions may result in personal injury or equipment damage.

• Rí i dájú pé gbogbo ohun èlò náà ní ìpìlẹ̀ tó yẹ.
• Ṣe akiyesi gbogbo awọn koodu itanna agbegbe ati ti orilẹ-ede.
• Dabobo module lati ọrinrin, eruku, ati awọn iwọn otutu to gaju.
• Má ṣe lo module náà bí ó bá dàbí ẹni pé ó ti bàjẹ́.

3. Ọja Ipariview

The LP-XP91D05-000C is an expansion module designed to integrate additional digital input capabilities into a compatible control system. It features 8 digital inputs and is built for robust performance in industrial settings, with a convenient DIN rail mountable design.

Awọn ẹya pataki:

• 8 Awọn igbewọle oni-nọmba
• DIN Rail Mountable
• Designed for industrial control applications

Àwọn Ẹ̀yà Modulu:

Nọmba 1: Iwaju view of the Johnson Controls LP-XP91D05-000C Expansion Module. The image shows the module itself, labeled with "FACILITY EXPLORER" and "JOHNSON CONTROLS XP91D05", along with labels for digital inputs DI1 through DI8. A portion of the packaging box with the model number is also visible in the background.

The module features clearly labeled digital input terminals (DI1-DI8) on its front face, facilitating easy connection to sensors or other input devices. The DIN rail mounting mechanism is located on the rear of the unit.

4. Eto ati fifi sori

4.1 Iṣagbesori

1. Ensure the DIN rail is securely mounted within the control panel.
2. Align the module's DIN rail clip with the top edge of the DIN rail.
3. Press the module firmly downwards until it clicks into place on the rail.
4. Verify that the module is securely fastened and does not wobble.

4.2 Wiring Digital Inputs

The LP-XP91D05-000C provides 8 digital inputs (DI1-DI8). Refer to your main control system's documentation for specific wiring diagrams and input signal requirements. Generally, digital inputs are used for sensing on/off states from devices such as switches, relays, or digital sensors.

• Use appropriate gauge wiring for all connections.
• Rí i dájú pé gbogbo àwọn ìsopọ̀ wà ní ìdúróṣinṣin àti ní ààbò láti dènà ìṣiṣẹ́ lẹ́ẹ̀kọ̀ọ̀kan.
• Observe polarity if the digital inputs are sensitive to it (consult main controller manual).

5. Awọn ilana Iṣiṣẹ

Once installed and wired, the LP-XP91D05-000C module operates as an extension of your main control system. The digital inputs will transmit their state (e.g., open/closed, on/off) to the connected controller.

1. Power on the main control system after all wiring is complete and verified.
2. Configure the digital inputs within your control system's programming environment according to your application requirements.
3. Monitor the status of the digital inputs through the control system's interface to confirm correct operation.

6. Itọju

The LP-XP91D05-000C Expansion Module is designed for reliable, low-maintenance operation. Regular maintenance typically involves:

• Ayewo wiwo: Periodically check the module for any signs of physical damage, loose connections, or excessive dust accumulation.
• Ninu: If necessary, gently clean the exterior of the module with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Iduroṣinṣin asopọ: Ensure all wiring terminals remain secure.

7. Laasigbotitusita

If the module is not functioning as expected, consider the following:

• Kò sí Ìdáhùn Ìṣíwọlé:
  • Verify power to the main control system.
  • Check wiring connections to the digital inputs (DI1-DI8) for looseness or incorrect termination.
  • Confirm the input device (sensor, switch) is functioning correctly.
  • Review the control system's programming for correct input configuration.
• Modulu Ko ṣe idanimọ:
  • Ensure the module is correctly seated on the DIN rail and properly connected to the main controller's expansion bus (if applicable).
  • Consult the main control system's manual for module detection and addressing procedures.
• Iṣiṣẹ Laarin:
  • Ṣayẹwo awọn asopọ onirin alaimuṣinṣin.
  • Inspect for environmental factors such as excessive vibration, temperature fluctuations, or electromagnetic interference.

If issues persist, contact Johnson Controls technical support.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official Johnson Controls website or contact your authorized distributor. Keep your purchase receipt and product serial number (if applicable) for warranty claims.

Iṣẹ́ Ìṣàkóso Johnson Webojula: www.johnsoncontrols.com