iRobot Roomba 650

iRobot Roomba 650 Robot Vacuum User Afowoyi

Model: R650 | Brand: iRobot

Ọrọ Iṣaaju

The iRobot Roomba 650 Robot Vacuum is designed to provide automated floor cleaning. This manual provides essential information for the proper setup, operation, and maintenance of your device.

Key Awọn ẹya ara ẹrọ

iRobot Roomba 650 Robot Vacuum, top view
olusin 1: Top view of the iRobot Roomba 650 Robot Vacuum, showing the control panel with CLEAN, SPOT, DOCK, DAY, HOUR, MINUTE, and SCHEDULE buttons.

Ṣeto

  1. Yọọ kuro: Remove the Roomba robot and all accessories from the packaging.
  2. Batiri Gba agbara: Ensure the battery is fully charged before first use. Place the Roomba on its Home Base. The CLEAN button will pulse amber while charging and turn solid green when fully charged. A full charge can take up to 3 hours.
  3. Position Home Base: Place the Home Base on a hard, level surface against a wall. Ensure there is at least 1.5 feet (0.5 meters) of clear space on each side of the Home Base and 4 feet (1.2 meters) in front of it. Keep the area clear of obstacles and virtual walls.
  4. Mura Agbegbe Isọgbẹ: Remove excess clutter from floors, such as cables, small rugs, or lightweight items that could obstruct the robot.

Awọn ilana Iṣiṣẹ

Bibẹrẹ Ayika Cleaning

  1. Ibẹrẹ Afowoyi: Tẹ awọn MỌ button once to wake up the Roomba. Press MỌ again to start a cleaning cycle.
  2. Ibi Mọ: For concentrated cleaning of a small area, place the Roomba over the debris and press the ASIBI button. The robot will clean in a spiral pattern approximately 3 feet (1 meter) in diameter.
  3. Daduro/Tẹ bẹrẹ: Lati daduro akoko mimọ, tẹ awọn MỌ bọtini. Tẹ MỌ lẹẹkansi lati bẹrẹ.
  4. End Cycle/Dock: To end a cleaning cycle and send the Roomba back to its Home Base, press the DOCK bọtini.

Scheduling Cleaning Times

  1. Ṣeto aago: Tẹ Aago, lẹhinna lo WAKATI ati ISEJU lati ṣeto akoko lọwọlọwọ. Tẹ Aago lẹẹkansi lati fipamọ.
  2. Ṣeto Iṣeto: Tẹ Iṣeto, lẹhinna lo OJO, WAKATI, ati ISEJU to set your desired cleaning time for each day. Press Iṣeto lẹẹkansi lati fipamọ.
iRobot Roomba 650 Robot Vacuum cleaning a room with hardwood and carpet
Figure 2: The iRobot Roomba 650 Robot Vacuum operating on a floor, transitioning between hardwood and a patterned rug, demonstrating its multi-surface cleaning capability.

Itoju

Regular maintenance ensures optimal performance of your Roomba. Perform these steps regularly:

Laasigbotitusita

OroOjutu
Roomba not charging or docking.Ensure the Home Base is placed in an open area with sufficient clearance. Clean the charging contacts on both the robot and the Home Base. Verify the power cord is securely plugged into the Home Base and the wall outlet.
Roomba gets stuck frequently.Clear the cleaning area of loose cables, small rugs, or other obstacles. Use Virtual Wall barriers to block off problem areas. Ensure the brushes are free of tangled hair and debris.
Iṣẹ́ ìwẹ̀nùmọ́ tí ó dínkù.Empty the dust bin. Clean or replace the filter. Clean the main brushes and side brush to remove tangled hair and debris.
Roomba is unusually loud.Check the brushes for any obstructions or tangled hair. Ensure the dust bin is properly seated. If the noise persists, contact customer support.

Awọn pato

Atilẹyin ọja ati Support

The iRobot Roomba 650 Robot Vacuum comes with a 1-odun lopin atilẹyin ọja from the date of purchase. For detailed warranty information, product support, or to purchase replacement parts, please visit the official iRobot website or contact iRobot customer service.

O le wa awọn afikun oro ati alaye olubasọrọ lori awọn iRobot Store on Amazon.