BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape User Manual

Ifihan ati Alaye Aabo

This manual provides essential information for the safe and effective use of your BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape. Please read all instructions carefully before installation and operation.

AKIYESI AABO PATAKI: A temperature controller is beere for the safe operation of this heating tape. Failure to use a temperature controller can result in overheating, product damage, fire, or personal injury. This heating tape is designed for industrial and scientific applications and should only be used by qualified personnel.

The heating tape is moisture and chemical resistant and suitable for electrically conductive surfaces. Do not exceed the maximum exposure temperature of 450°F (232°C).

Ọja Pariview

Nọmba 1: BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape. This image shows the flexible silicone rubber heating tape, which is wrapped around a metallic rod, illustrating its application for heating cylindrical objects or pipes. The tape has a distinct reddish-brown color and a textured surface.

The BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape features a silicone rubber extruded outer sheath with a fiberglass knitted and braided construction, ensuring durability and flexibility. It incorporates a multi-stranded resistance wire for efficient heating.

• Ohun elo: Silicone Rubber Extruded Outer Sheath with Fiberglass, Knitted and Double-Braided.
• Atako: Moisture and chemical resistant.
• Irọrun: Exceptional flexibility for various applications.
• Awọn asiwaju: 24in (610mm) power leads on the same end with a separable standard 2-prong power plug (NEMA 1-15).

Eto ati fifi sori

1. Inspect the Tape: Before installation, visually inspect the heating tape for any signs of damage, cuts, or abrasions. Do not use if damaged.
2. Mura Ilẹ: Ensure the surface to be heated is clean, dry, and free from sharp edges that could damage the tape.
3. Pa teepu naa: Carefully wrap the heating tape around the object or surface requiring heat. Ensure even contact and avoid overlapping the tape excessively, which can lead to hot spots. For optimal heat distribution, maintain consistent spacing between wraps.
4. So teepu naa mọ: Use appropriate high-temperature tape or clamps (not included) to secure the heating tape in place, preventing it from unwrapping or shifting during operation.
5. Connect to Controller: Connect the 2-prong power plug of the heating tape to a suitable temperature controller (sold separately). Ensure the controller's specifications match the heating tape's requirements (120VAC, 627 Watts).
6. Ilẹ: Ensure proper grounding of the system as per local electrical codes.

Akiyesi: This heating tape is suitable for electrically conductive surfaces.

Awọn ilana Iṣiṣẹ

1. Set Temperature Controller: Power on your temperature controller and set the desired operating temperature. Refer to your temperature controller's manual for specific instructions on setting parameters.
2. Bojuto iwọn otutu: Continuously monitor the temperature of the heated object or surface to ensure it remains within safe and desired limits.
3. Awọn ohun elo: This heating tape is ideal for a wide range of applications, including:
   • Heating laboratory apparatus
   • Gas tubing
   • Temporary heat applications
   • Valves and pipes
   • Idaabobo di
4. Agbara Pa: When heating is no longer required, turn off the temperature controller and disconnect the heating tape from the power source.

Itoju

• Ayẹwo igbagbogbo: Periodically inspect the heating tape for any signs of wear, damage, or degradation of the silicone sheath. Pay close attention to the power leads and connections.
• Ninu: If necessary, clean the heating tape with a soft, damp cloth. Do not use abrasive cleaners or solvents that could damage the silicone. Ensure the tape is completely dry before re-applying power.
• Ibi ipamọ: When not in use, store the heating tape in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks that could damage the internal heating element.
• Atunṣe Ọjọgbọn: Do not attempt to repair damaged heating tape. Contact BriskHeat or a qualified technician for assistance.

Laasigbotitusita

If problems persist after attempting these solutions, contact BriskHeat customer support.

Awọn pato

• Awoṣe: BS0201060L
• Àwọn ìwọ̀n (W x L): 2ni (51mm) x 72in (1830mm)
• Lapapọ Wattis: 627 Wattis
• Voltage: 120VAC
• Ìwọ̀n Agbara: 4.3w/sq in (0.007w/sq mm)
• O pọju iwọn otutu Ifihan: 450°F (232°C)
• Ohun elo: Silicone Rubber Extruded Outer Sheath with Fiberglass, Knitted and Double-Braided
• Awọn asiwaju: 24in (610mm) power leads on the same end with a separable standard 2-prong power plug (NEMA 1-15)
• Atako: Moisture and chemical resistant
• Ibamu: Suitable for electrically conductive surfaces
• Ohun elo ti a beere: Temperature Controller (Sold Separately)

Atilẹyin ọja ati Support

For information regarding product warranty, please refer to the official BriskHeat warranty policy available on their website or contact BriskHeat directly.

For technical support, product inquiries, or service, please contact BriskHeat customer service.
Visit the BriskHeat Store on Amazon