Brinno ATM100 Motion Sensor User Manual

Ọrọ Iṣaaju

The Brinno ATM100 Motion Sensor is an accessory designed to enhance the functionality of Brinno TLC200 and TLC200 f1.2 time lapse cameras. When connected, it transforms your time lapse camera into a motion-activated recording device, capturing events only when movement is detected.

This sensor is ideal for applications such as property surveillance, monitoring wildlife, or capturing specific events without continuous recording. Its portable design allows for flexible placement in various environments.

Image: The Brinno ATM100 Motion Sensor, showing its compact design and integrated cable with a 3.5mm jack.

Ibamu

• Ni ibamu pẹlu: Brinno TLC200 and Brinno TLC200 f1.2 Time Lapse HD Video Cameras.
• Ko ni ibamu pẹlu: Brinno TLC200 Pro model.

Package Awọn akoonu

The Brinno ATM100 Motion Sensor package typically includes:

• Brinno ATM100 Motion Sensor unit with integrated cable.
• Magnetic attachment ring (pre-installed or separate).

Awọn ilana iṣeto

1. Mura Kamẹra naa: Ensure your Brinno TLC200 or TLC200 f1.2 camera is powered off before connecting the motion sensor.
2. So sensọ naa pọ mọ: The ATM100 Motion Sensor features a magnetic attachment. Align the sensor's ring with the camera's lens ring. The sensor will magnetically snap into place above the camera's lens.
3. So okun pọ: Locate the 3.5mm audio jack input on your Brinno camera. Insert the ATM100's cable jack firmly into this port. A tight connection is essential for proper function. Ensure the jack is fully seated.
4. Ipo: Mount your camera with the attached motion sensor in the desired location. Consider the sensor's detection range and angle (detailed below) when positioning for optimal coverage.

Image: The Brinno ATM100 Motion Sensor magnetically attached to a Brinno TLC200 series camera, with its cable connected.

Awọn ilana Iṣiṣẹ

1. Agbara Tan: After connecting the ATM100, power on your Brinno camera. The camera should automatically recognize the motion sensor and switch to motion detection mode.
2. Iwari išipopada: When the ATM100 detects movement within its range, the camera will activate and begin recording.
3. Gbigbasilẹ Iye: The camera will typically record for 10 seconds after motion is detected. If continuous motion is detected, the camera may reactivate to continue recording.
4. File Ilana: Recorded photos are stored as an AVI file on the camera's memory card for easy viewing.
5. Abojuto: Use the camera's display to confirm motion detection and recording status.

Image: An illustration depicting the Brinno ATM100 Motion Sensor attached to a camera, with a red cone indicating its detection range.

Detection Range and Angle

• Ibiti o pọju: The sensor can detect movement up to 4 meters (approximately 13.1 feet).
• Igun Wiwa: The sensor has a detection angle of 90 degrees, covering 45 degrees in every direction from its central axis.

For optimal performance, ensure that the area you wish to monitor falls within these parameters. Obstructions can reduce the effective detection range.

Itoju

• Ninu: Use a soft, dry cloth to gently clean the sensor lens and body. Avoid abrasive cleaners or solvents.
• Ibi ipamọ: When not in use, store the sensor in a cool, dry place away from direct sunlight and extreme temperatures.
• Itọju USB: Avoid bending or crimping the sensor's cable excessively to prevent internal damage.

Laasigbotitusita

Sensọ ti ko rii išipopada:

• Ṣayẹwo Asopọmọra: Ensure the 3.5mm jack is fully and firmly inserted into the camera's port. The connection can be tight, requiring a firm push.
• Jẹrisi Ibamu: Confirm that your camera is a Brinno TLC200 or TLC200 f1.2 model. The ATM100 is not compatible with the TLC200 Pro.
• Ṣayẹwo Ipo: Ensure the object or person you are trying to detect is within the 4-meter range and 90-degree detection angle.
• Awọn idilọwọ: Remove any objects that might be blocking the sensor's view.
• Ipo kamẹra: Power cycle the camera after connecting the sensor to ensure it enters motion detection mode.

Camera not recording after motion detection:

• Kaadi Iranti: Check if the camera's memory card has sufficient space and is properly inserted.
• Eto kamẹra: Review your camera's settings to ensure it is configured to record when motion is detected.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries, please refer to the official Brinno website or contact Brinno customer service directly. Keep your purchase receipt as proof of purchase.

Brinno Official Webojula: www.brinno.com