1. Ifihan
This manual provides instructions for the safe and efficient operation of your Intermec Easycoder PC41 Thermal Label Printer. The PC41 is a desktop barcode label printer designed for direct thermal printing, featuring a 4-inch print width and multiple connectivity options including Serial, Parallel, and USB interfaces. Please read this manual thoroughly before operating the device.
2. Alaye Aabo
Observe the following safety precautions to prevent injury and damage to the printer:
- Nigbagbogbo so itẹwe pọ mọ iṣan agbara ti ilẹ.
- Do not operate the printer in wet or excessively humid environments.
- Pa itẹwe naa mọ kuro ninu oorun taara ati awọn orisun ooru.
- Rii daju pe fentilesonu to dara ni ayika itẹwe.
- Ge asopọ agbara ṣaaju ṣiṣe mimọ tabi ṣiṣe itọju.
- Avoid touching the print head immediately after printing, as it may be hot.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- Intermec Easycoder PC41 Thermal Label Printer
- Okùn Agbára (Okùn Agbára Amẹ́ríkà)
- Okun USB
- Itọsọna Ibẹrẹ kiakia (le wa pẹlu)
- Driver CD (may be included, or drivers available online)
4. Eto
4.1 Ṣiṣii ati Gbe
Carefully remove the printer from its packaging. Place the printer on a stable, level surface with adequate space for label loading and output.
4.2 Nsopọ Agbara
- Connect the power cord to the printer's power input port.
- Pulọọgi opin miiran ti okun agbara sinu iṣan itanna ti o wa lori ilẹ.
- Tẹ bọtini agbara lati tan itẹwe.
4.3 Nsopọ si Kọmputa kan
The PC41 printer supports USB, Serial, and Parallel connections.
- Asopọ USB: Connect one end of the USB cable to the printer's USB port and the other end to an available USB port on your computer.
- Asopọmọra ni tẹlentẹle: Connect a serial cable (not included) to the printer's serial port and to your computer's serial port.
- Isopọ ti o jọra: Connect a parallel cable (not included) to the printer's parallel port and to your computer's parallel port.
4.4 ikojọpọ Labels
The PC41 is designed for direct thermal labels. Ensure the labels are compatible with direct thermal printing.
- Ṣí ideri orí ẹ̀rọ ìtẹ̀wé náà.
- Place the roll of labels onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
- Feed the leading edge of the labels through the media guides and under the print head assembly.
- Adjust the media guides to fit the width of your labels snugly but without restricting movement.
- Close the top cover. The printer may automatically calibrate or feed a few labels.
Figure 1: Intermec Easycoder PC41 Thermal Label Printer in operation, showing a label exiting the printer. This image illustrates the compact design and the label output mechanism.
4.5 Driver fifi sori
Install the appropriate printer drivers on your computer. Drivers are typically available on a provided CD or can be downloaded from the Intermec (now Honeywell) support webojula. Tẹle awọn ilana loju iboju fun fifi sori awakọ.
5. Awọn ilana Iṣiṣẹ
5.1 Ipilẹ titẹ sita
- Rii daju pe itẹwe ti wa ni titan ati ti sopọ si kọnputa rẹ.
- Load the desired labels into the printer.
- Ṣí ẹ̀rọ ìṣàpẹẹrẹ tàbí ohun èlò ìṣàpẹẹrẹ àmì rẹ.
- Select the Intermec PC41 as your printer.
- Configure print settings such as label size, orientation, and quantity.
- Initiate the print job from your software.
5.2 Awọn imọlẹ Atọka
The printer features indicator lights to communicate its status:
- Alawọ ewe ri to: Printer is ready.
- Alawọ ewe didan: Data is being received or processed.
- Pupa ti o lagbara: Error condition (e.g., out of labels, cover open). Refer to troubleshooting.
- Pupa didan: Print head overheating or other critical error.
6. Itọju
Itọju deedee n ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati gigun igbesi aye ẹrọ itẹwe rẹ.
6.1 Ninu awọn Print Head
The print head should be cleaned periodically, especially if print quality degrades.
- Paa ati yọọ atẹwe naa kuro.
- Ṣii ideri oke.
- Using a lint-free cloth or a print head cleaning pen moistened with isopropyl alcohol, gently wipe the print head surface.
- Jẹ́ kí orí ìtẹ̀wé náà gbẹ pátápátá kí o tó ti ìbòrí náà kí o sì fi agbára sí ẹ̀rọ ìtẹ̀wé náà.
6.2 Gbogbogbo Cleaning
Mu ese ita ti itẹwe pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
7. Laasigbotitusita
This section addresses common issues you might encounter with your PC41 printer.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹ̀rọ ìtẹ̀wé kò ṣiṣẹ́. | Okun agbara ko sopọ; agbara iṣan aṣiṣe. | Rii daju pe okun agbara ti sopọ ni aabo. Ṣe idanwo iṣan jade pẹlu ẹrọ miiran. |
| No labels are printing. | Out of labels; labels loaded incorrectly; printer not connected to computer; driver issue. | Load new labels correctly. Check cable connections. Reinstall printer drivers. |
| Poor print quality (faded, lines). | Dirty print head; incorrect media type; print head wear. | Clean the print head (see Section 6.1). Ensure correct direct thermal labels are used. If issue persists, contact support. |
| Printer status light is red. | Cover open; out of labels; media jam. | Close the top cover. Load labels. Clear any jammed media. |
8. Awọn pato
Key technical specifications for the Intermec Easycoder PC41 Thermal Label Printer:
- Orukọ awoṣe: PC41A000000
- Brand: Intermec (now Honeywell)
- Imọ-ẹrọ titẹ sita: Gbona taara
- Ijade itẹwe: Monochrome
- Titẹ sita Iwọn: 4 inches (as per description)
- Iranti: 512KB RAM / 1MB Flash (as per description)
- Imọ-ẹrọ Asopọmọra: USB, Serial (IEEE 1284), Parallel
- Awọn ẹrọ ibaramu: PC
- Titẹ Media: Awọn akole
- Ìwọ̀n Nkan: 8.8 iwon
- Akọkọ Wa: Oṣu Kẹfa Ọjọ 18, Ọdun 2014
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Honeywell (formerly Intermec) support webojula. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.
