Ìwé Ìtọ́sọ́nà Olùlò Sunlite 50703-SU 1-Gang Decorative Steel Switch àti Receptacle Plate

1. Ifihan

This manual provides essential instructions for the safe installation, proper care, and maintenance of your Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate. Designed for durability and aesthetic appeal, this wall plate is intended to cover a single Decora-style switch or receptacle.

2. Alaye Aabo

• Ewu Itanna: Always turn off power at the circuit breaker or fuse box before attempting any electrical installation or maintenance. Failure to do so can result in serious injury or death.
• Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si onisẹ ina mọnamọna ti o peye.
• Ọja yii jẹ apẹrẹ fun lilo inu ile nikan.
• Do not use this product if it appears damaged.

3. Package Awọn akoonu

• One (1) Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate
• Two (2) Color-Matched Mounting Screws

4. Eto ati fifi sori

Follow these steps to safely install your new wall plate:

1. Pa Agbara: Locate the circuit breaker or fuse box that controls the power to the switch or receptacle you are working on. Turn off the power completely. Verify that the power is off using a voltage idanwo.
2. Yọ Àwo Odi Atijọ kuro: Carefully unscrew and remove the existing wall plate.
3. Ipo Awo Odi Tuntun: Align the Sunlite 50703-SU decorative wall plate over the switch or receptacle opening. Ensure the plate is level.
4. Awo Odi to ni aabo: Use the two included color-matched screws to fasten the wall plate to the electrical box. Do not overtighten the screws, as this can damage the plate or the electrical box.
5. Pada Agbara pada: Once the wall plate is securely installed, restore power at the circuit breaker or fuse box.

Iwaju view of the Sunlite 50703-SU 1-Gang Decorative Steel Wall Plate, showcasing its brushed steel finish and single opening for a Decora-style switch or receptacle.

Informational graphic detailing the Sunlite 1-Gang Decorative Steel Wall Plate. It highlights key features such as 1-Gang cover plate, durable steel construction, easy installation, and UL listing, along with its dimensions of 4.6 inches high and 2.8 inches wide.

5. Isẹ

Once installed, the Sunlite 50703-SU wall plate serves as a protective and decorative cover for your electrical switch or receptacle. No operational steps are required for the wall plate itself.

6. Itọju ati Itọju

• To clean the wall plate, use a soft, damp asọ.
• Yẹra fún lílo àwọn ohun ìfọṣọ, àwọn kẹ́míkà líle, tàbí àwọn pádì ìfọṣọ, nítorí pé wọ́n lè ba ìparí rẹ̀ jẹ́.
• Regular cleaning will help maintain the plate's appearance and prevent dust accumulation.

7. Laasigbotitusita

• Àwo Kò Yà: Ensure that the electrical box is a standard 1-gang size and that the switch or receptacle is Decora-style.
• Screws Do Not Align: Check the alignment of the electrical box and the device (switch/receptacle). Adjust if necessary. Do not force screws.
• Awọn idọti tabi ibajẹ: If the plate is scratched or damaged during installation, it may need to be replaced.

8. Awọn pato

9. atilẹyin ọja Information

For detailed warranty information regarding your Sunlite 50703-SU Decorative Steel Switch and Receptacle Plate, please refer to the product packaging or contact Sunlite customer service.

10. Atilẹyin

For further assistance, product inquiries, or to explore other Sunlite products, please visit the official Sunlite store:

Visit the Sunlite Store on Amazon