Graco Affix Highback Booster Seat with Latch System Instruction Manual

1. Ifihan

This manual provides essential instructions for the proper installation, use, and maintenance of your Graco Affix Highback Booster Seat with Latch System. This booster seat is designed to safely transport children weighing 40 to 100 lb and up to 57 inches tall. The Latch system provides a secure connection to your vehicle seat, facilitating independent buckling for your child. Always secure your child using the vehicle's lap/shoulder belt.

Image 1.1: The Graco Affix Highback Booster Seat, showcasing its design and color scheme.

2. Eto ati fifi sori

2.1 Latch System Connection

The one-hand front-adjust Latch system secures the booster seat to the vehicle. This system is intended to keep the booster seat stable when unoccupied and to assist with independent buckling. It is not used for child restraint during travel; the vehicle's lap/shoulder belt is used for this purpose.

1. Locate the Latch connectors on the booster seat.
2. Press the red button on the Latch connector to release it.
3. Attach the Latch connectors to your vehicle's lower anchor bars.
4. Pull the front-adjust strap to tighten the Latch system, ensuring the booster seat is securely fastened to the vehicle seat.

Image 2.1: A hand demonstrating the adjustment of the one-hand front-adjust Latch system to secure the booster seat to the vehicle.

2.2 Cup dimu sori

The cup holder must be installed before use. It is located in a compartment at the bottom of the booster seat base.

1. Remove the cup holder from its storage compartment in the bottom of the base.
2. Align the tabs on the side and bottom of the cup holder with their corresponding slots in the booster seat base.
3. Press the cup holder firmly into place until it clicks. Once attached, the cup holder should not be removed.

2.3 Headrest Atunṣe

The headrest is fully adjustable to accommodate your child's growth and ensure proper fit of the vehicle's shoulder belt.

1. Wa àtúnṣe ìdúró orí, tí ó sábà máa ń wà ní orí ìdúró orí.
2. Squeeze the lever and slide the headrest up or down to the desired height.
3. Ensure the shoulder belt guide is positioned correctly, just above your child's shoulders, allowing the vehicle's shoulder belt to rest flat across the middle of their shoulder.

3. Awọn ilana Iṣiṣẹ

3.1 Ni aabo ọmọ rẹ

The Graco Affix Highback Booster Seat is designed for children aged 4-10 years, weighing 40-100 lb, and up to 57 inches tall. Always use the vehicle's lap/shoulder belt to secure your child.

1. Position your child in the booster seat.
2. Guide the vehicle's lap belt across your child's upper thighs, ensuring it sits low on the hips.
3. Thread the vehicle's shoulder belt through the red shoulder belt guide on the booster seat's headrest.
4. Ensure the shoulder belt rests flat across the middle of your child's shoulder and chest, not on their neck or arm.
5. Buckle the vehicle's seat belt and pull any slack to ensure a snug fit.

Image 3.1: A child demonstrating how to buckle into the booster seat using the vehicle's seat belt.

3.2 Àwọn Ẹ̀yà Ara Tí A Ṣẹ̀pọ̀

• Dimu Cup: The integrated cup holder keeps drinks and snacks accessible for your child.
• Hideaway Storage: A small compartment is available for storing personal items.
• Full Coverage Back Support: The booster provides continuous back support as your child grows.
• Energy-Absorbing Foam: Equipped with EPS, energy-absorbing foam for effective impact management.

4. Itọju ati Cleaning

4.1 Cleaning the Seat Pad

The seat padding is machine-washable for easy cleaning.

1. Tọkasi itọju naa tag on the seat pad for specific washing instructions.
2. Typically, machine wash in cold water on a delicate cycle.
3. Drip dry; do not use bleach.

4.2 Cleaning Metal and Plastic Parts

Metal and plastic components can be cleaned with mild soap and cool water.

1. Pa awọn oju ilẹ pẹlu ipolowoamp asọ ati ìwọnba ọṣẹ ojutu.
2. Fi omi ṣan daradara pẹlu mimọ, damp asọ.
3. Jẹ́ kí gbogbo àwọn ẹ̀yà ara gbẹ pátápátá kí a tó tún kó wọn jọ tàbí kí a lò wọ́n.

For comprehensive cleaning instructions, please refer to the full user guide.

5. Laasigbotitusita

If you encounter any issues with your Graco Affix Highback Booster Seat, please review the following general advice:

• Fifi sori ẹrọ alaimuṣinṣin: Ensure the Latch system is properly tightened and the vehicle's seat belt is snug. Re-read the installation steps in Section 2.
• Àwọn Ìṣòro Ìbámu Bẹ́ǹtì: Adjust the headrest height to ensure the shoulder belt lies flat across your child's shoulder and chest. The lap belt should be low on the hips.
• Awọn ẹya ti o padanu: Verify all components are present by checking the product packaging and comparing with the parts list in the full user guide.

For persistent problems or specific concerns, consult the detailed user guide or contact Graco customer support.

6. Awọn pato

Image 6.1: Visual representation of the booster seat's dimensions: 15.5 inches deep, 16.5 inches wide, and 26.75 inches high.

7. Atilẹyin ọja ati Support

7.1 atilẹyin ọja Alaye

For detailed information regarding the product warranty, please refer to the documentation included with your purchase or visit the official Graco webojula. Awọn ofin atilẹyin ọja le yatọ.

7.2 Onibara Support

If you require assistance, have questions, or need to report an issue, please contact Graco customer service. You can find contact information on the official Graco website or in the full user guide.

Itọsọna olumulo okeerẹ ni ọna kika PDF wa fun igbasilẹ: Graco Affix Highback Booster Seat User Guide (PDF)