1. Ifihan
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Alaye Aabo
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.
- Nigbagbogbo ge asopọ agbara ṣaaju fifi sori ẹrọ tabi ṣiṣẹ ẹrọ naa.
- Ensure the device is installed in a suitable enclosure to protect against environmental factors.
- Verify correct wiring connections to prevent damage to the device or connected equipment.
- Maa ko koja volum pàtótage ati lọwọlọwọ-wonsi.
3. Ọja Ipariview
The Finder 140182300000PAS is a versatile multifunction timer and staircase relay designed for various electrical control applications. It features a 230V operating voltage, a 1 NO (normally open) contact, and a 16A current rating. Its compact design allows for easy integration into electrical panels.
Nọmba 1: Iwaju view of the Finder 140182300000PAS Multifunction Timer/Staircase Relay. This image shows the device's casing, terminals, and the adjustable timer dial.
Nọmba 2: Example application of the Finder 140182300000PAS controlling staircase lighting. The relay is shown in an inset, demonstrating its use in a typical residential or commercial setting.
Nọmba 3: Another application example, showing the Finder 140182300000PAS managing lighting for a modern spiral staircase. This highlights the device's suitability for various architectural lighting designs.
4. Eto ati fifi sori
4.1 Ti ara Mefa
Refer to the dimensional drawing for precise measurements to ensure proper fit and mounting.
Nọmba 4: Dimensional drawing for the Type 14.01 relay, showing height, width, and depth in millimeters. This diagram is crucial for planning installation space.
4.2 Wiring Awọn aworan atọka
The Finder 140182300000PAS supports both 3-wire and 4-wire connection types. Select the appropriate diagram for your installation.
Nọmba 5: Wiring Diagram Type 14.01 for a 3-wire connection. This diagram illustrates how to connect the relay to the power supply and load using a 3-wire configuration, typically for staircase lighting with a common neutral.
Nọmba 6: Wiring Diagram Type 14.01 for a 4-wire connection. This diagram shows the connections for a 4-wire setup, which might be used in systems requiring separate control wires for the relay and the load.
5. Awọn ilana Iṣiṣẹ
5.1 Aago Atunṣe
The device features an adjustable timer dial on its front face. To set the desired timing duration:
- Locate the orange dial labeled 'T(min)' on the front of the relay.
- Rotate the dial to align the indicator with the desired time setting (e.g., 5, 10, 15, 20 minutes).
- The selected time will determine how long the connected load remains active after activation.
5.2 Multifunction Operation
The Finder 140182300000PAS operates as both a staircase timer and a multifunction relay. When activated (e.g., by a push-button switch), the relay will close its contact, powering the connected load for the duration set on the timer. It can be used for applications such as:
- Staircase lighting control.
- Timed ventilation systems.
- General purpose timed switching.
6. Itọju
The Finder 140182300000PAS is designed for long-term, maintenance-free operation. However, periodic checks are recommended:
- Rí i dájú pé gbogbo àwọn ìsopọ̀ wáyà wà ní ààbò.
- Jeki ẹrọ naa laisi eruku ati idoti.
- Inspect for any signs of physical damage or overheating.
- If the device is exposed to harsh environments, consider more frequent inspections.
WARNING: Always disconnect power before performing any maintenance or inspection.
7. Laasigbotitusita
Tí ẹ̀rọ náà kò bá ṣiṣẹ́ bí a ṣe retí, ẹ gbé àwọn nǹkan wọ̀nyí yẹ̀ wò:
- No power to the load: Check the main power supply, circuit breaker, and all wiring connections. Ensure the device is receiving 230V.
- Timer not activating: Verify the input signal (e.g., from the push-button switch) is correctly connected and functioning.
- Incorrect timing duration: Re-check the setting on the 'T(min)' dial.
- Ngbona ẹrọ: Ensure the load current does not exceed 16A. Check for proper ventilation around the device.
If issues persist after checking these points, consult a qualified electrician or contact Finder customer support.
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Olupese | Oluwari |
| Nọmba awoṣe | 140182300000PAS |
| Awọn iwọn Ọja (L x W x H) | 8.4 x 1.8 x 5.9 cm |
| Iwọn | 60 giramu |
| Àwọ̀ | Grẹy |
| Ohun elo | Ṣiṣu |
| Voltage | 230 Volts |
| Olubasọrọ Iru | 1 KO (A maa n ṣii nigbagbogbo) |
| Ti isiyi Rating | 16 A |
| Nọmba ti Eto | 8 (Timer functions) |
| Batiri (awọn) To wa | Rara |
| Batiri (awọn) beere | Rara |
| Apoju Awọn ẹya ara wiwa | Alaye ko si |
8.1 Awọn iwe-ẹri
The product complies with various international standards.
Nọmba 7: Product certifications, including CE, UKCA, EAC, and Q-Mark, indicating compliance with European, UK, Eurasian, and quality standards respectively.
9. Atilẹyin ọja ati Support
Fun alaye atilẹyin ọja ati atilẹyin imọ-ẹrọ, jọwọ tọka si Oluwari osise webaaye tabi kan si olupin agbegbe rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira.
