1. Ifihan
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch. This device is designed to provide reliable network connectivity with Power over Ethernet capabilities for various applications.
The AT-GS950/10PS is a managed switch featuring 8 Power over Ethernet Plus (PoE+) ports, 2 Gigabit Ethernet ports, and 2 SFP combo ports. It supports web-based management for easy configuration and monitoring.
Nọmba 1: Iwaju view of the Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch, showing the 8 PoE+ ports, 2 Gigabit ports, 2 SFP combo ports, and LED indicators for power, PoE status, speed, link, and activity.
2. Package Awọn akoonu
Jẹrisi pe package rẹ ni awọn nkan wọnyi ninu:
- Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch
- Ohun elo iṣagbesori
- Apo iṣagbesori agbeko
- Power adapter (not explicitly listed but implied for operation)
- Quick Start Guide (not explicitly listed but typical)
If any items are missing or damaged, please contact your vendor or Allied Telesis support.
3. Eto ati fifi sori
3.1. Ti ara Placement
The AT-GS950/10PS switch can be installed in a desktop, rack-mountable, or wall-mountable configuration. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the switch near sources of electromagnetic interference, excessive dust, or moisture.
3.2. Asopọ agbara
- Connect the power adapter to the power input port on the rear panel of the switch.
- Pulọọgi ohun ti nmu badọgba agbara sinu iṣan agbara AC to dara.
- The PWR LED on the front panel will illuminate, indicating that the switch is receiving power.
3.3. Awọn isopọ nẹtiwọki
Connect network devices (e.g., computers, servers, access points, IP cameras) to the switch using standard Ethernet cables.
- RJ-45 Ports (1-8): These are 10/100/1000BASE-T PoE+ ports. Connect PoE-compatible devices to these ports to provide both data and power.
- RJ-45 Ports (9R, 10R): These are 10/100/1000BASE-T Gigabit Ethernet ports.
- SFP Combo Ports (9, 10): These ports are shared with RJ-45 ports 9R and 10R. Insert compatible SFP transceivers for fiber optic connections. When an SFP module is inserted, the corresponding RJ-45 port is disabled.
3.4. Iṣeto akọkọ (Web-based Management)
The switch features web-based management for configuration. Refer to the separate "Web-based Management Guide" for detailed instructions on accessing and configuring the switch's settings, including VLANs, QoS, and port settings.
4. Ṣiṣẹ Yipada
4.1. Awọn afihan LED
The front panel LEDs provide real-time status information about the switch and its ports.
| LED | Ipo | Apejuwe |
|---|---|---|
| PWR | Alawọ ewe | Yipada ti wa ni agbara. |
| Poe MAX | Amber | Indicates that the total PoE power budget is nearing or exceeding its limit. |
| PoE (per port) | Alawọ ewe | Power is being supplied to the connected PoE device. |
| SPD (per port) | Alawọ ewe | Port is operating at 1000 Mbps (Gigabit). |
| Amber | Port is operating at 10/100 Mbps. | |
| LINK/ACT (per port) | Alawọ ewe (ri to) | Ọna asopọ nẹtiwọki to wulo ti wa ni idasilẹ. |
| Alawọ ewe (Itanna) | Iṣẹ́ ìṣiṣẹ́ dátà ń ṣẹlẹ̀ lórí ibudo náà. |
4.2. Agbara lori Ethernet Plus (PoE+)
The AT-GS950/10PS provides up to 30 watts of power per port on ports 1-8, compliant with IEEE 802.3at (PoE+). This allows for powering devices such as wireless access points, IP cameras, and VoIP phones directly through the Ethernet cable, simplifying deployment and reducing cabling requirements.
5. Itọju
5.1. Ninu
Ensure the switch is powered off and disconnected from all cables before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid or aerosol cleaners, as they may damage the device.
5.2. Awọn imudojuiwọn famuwia
Periodically check the Allied Telesis website for available firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware update package carefully.
5.3. Awọn ero Ayika
Maintain the operating environment within the recommended temperature and humidity ranges specified in the product's technical specifications to ensure optimal performance and longevity of the switch.
6. Laasigbotitusita
This section provides solutions to common issues you may encounter with the AT-GS950/10PS switch.
6.1. Ko si Agbara
- Rii daju pe ohun ti nmu badọgba agbara ti sopọ ni aabo si iyipada mejeeji ati iṣan agbara ṣiṣẹ.
- Daju pe iṣan agbara n ṣiṣẹ nipa pilogi sinu ẹrọ miiran.
- Check the PWR LED on the front panel. If it is off, the switch is not receiving power.
6.2. No Network Link
- Ensure the Ethernet cable is securely connected to both the switch port and the network device.
- Verify that the LINK/ACT LED for the connected port is solid green. If not, try a different cable or port.
- Check the network device to ensure it is powered on and functioning correctly.
- For SFP ports, ensure the SFP module is correctly inserted and compatible.
6.3. PoE Device Not Receiving Power
- Ensure the device connected is PoE-compatible (IEEE 802.3af/at).
- Verify that the PoE LED for the specific port is illuminated.
- Check the PoE MAX LED. If it is amber, the switch may be exceeding its total power budget. Disconnect non-essential PoE devices or reduce power consumption.
- Ensure the Ethernet cable is capable of carrying power (standard Cat5e or higher).
6.4. Ntun Yipada
If the switch is unresponsive or experiencing persistent issues, a factory reset may be necessary. Refer to the "Web-based Management Guide" for instructions on performing a factory reset, as this will erase all custom configurations.
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | AT-GS950/10PS |
| Brand | Allied Telesis |
| Ni wiwo Iru | PoE, SFP |
| Data Gbigbe Oṣuwọn | 1000 Megabits fun keji |
| Nọmba ti Ports | 10 (8 PoE+, 2 Gigabit, 2 SFP Combo) |
| Àgbo | 64 MB |
| Flash Memory Iwon | 16 MB |
| Awọn iwọn Ọja (LxWxH) | 15.75 x 11 x 3.25 inches |
| Iwọn Nkan | 7.2 iwon |
| Iṣagbesori Aw | Desktop, Rack-Mountable, Wall-Mountable |
| Isakoso | Web-based (Managed) |
8. Atilẹyin ọja ati Support
8.1. Atilẹyin ọja
Allied Telesis products are covered by a limited warranty. For detailed information regarding the warranty period and terms, please refer to the warranty statement available on the official Allied Telesis website or contact your local sales representative.
8.2. Imọ Support
For technical assistance, product documentation, or to download the latest firmware, please visit the official Allied Telesis support website. You can also contact Allied Telesis technical support directly for further assistance.
Note: Always refer to the latest documentation available on the manufacturer's webojula fun awọn julọ soke-si-ọjọ alaye.
