Craftmade Z1414-07 Wall Lantern User Manual

1. Ifihan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Craftmade Z1414-07 Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This image displays the Craftmade Z1414-07 Wall Lantern. It features a robust black finish, three light sockets visible through textured seeded champagne glass panels, and a decorative star-shaped mounting plate. The overall design is traditional and suitable for outdoor use.

2. Alaye Aabo

IKILO: Ewu ti Electric mọnamọna.

• Disconnect power at the fuse box or circuit breaker before installation, servicing, or changing bulbs.
• All electrical connections must be in accordance with local and national electrical codes. If you are unsure about the installation process, consult a qualified electrician.
• This fixture is designed for 120-volt electrical systems.
• Maṣe kọja wat ti o pọjutage pato fun awọn Isusu.
• This fixture is UL listed for wet and dry locations, making it suitable for outdoor use.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• 1 x Craftmade Z1414-07 Wall Lantern Fixture
• 1 x Awo iṣagbesori
• 2 x Iṣagbesori skru
• 3 x Seeded Champagne Glass Shades
• Awọn eso Waya
• Iwe itọnisọna

4. Awọn pato

5. Eto ati fifi sori

Follow these steps to install your wall lantern:

1. Pa Agbara: Kí o tó bẹ̀rẹ̀ iṣẹ́ iná mànàmáná èyíkéyìí, rí i dájú pé agbára tó wà nínú àpótí ìsopọ̀ náà ti pa ní ibi tí ẹ̀rọ ìfọ́ tàbí àpótí fiusi wà.
2. Múra Àwo Ìfipamọ́: Attach the mounting plate to the junction box using the provided mounting screws. Ensure it is securely fastened.
3. Ṣe Awọn Isopọ Itanna:
   • Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   Rii daju pe gbogbo awọn asopọ wa ni wiwọ ati aabo.
4. Òkè Ńlá: Carefully align the fixture with the mounting plate and secure it in place using the fixture screws.
5. Fi Awọn ojiji Gilasi sori ẹrọ: Gently place each seeded champagne glass shade into its designated position on the fixture. Secure them according to the specific design of the fixture (e.g., with clips or screws).
6. Fi sori ẹrọ Isusu: Insert three bulbs (not included) into the sockets. Ensure the bulbs are of the correct base type and do not exceed the maximum wattage rating for the fixture.
7. Pada Agbara pada: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box.

6. Awọn ilana Iṣiṣẹ

To operate your Craftmade Z1414-07 Wall Lantern, simply use the wall switch connected to the fixture. Ensure that the main power supply to the fixture is active.

7. Itọju

Regular maintenance will help prolong the life and appearance of your wall lantern:

• Ninu: Láti nu ohun èlò ìṣiṣẹ́ náà, rí i dájú pé agbára ti pa. Fi aṣọ rírọ, d nu ìta rẹ̀.amp cloth. Do not use abrasive cleaners, solvents, or polishes as these can damage the finish or glass.
• Rirọpo Boolubu: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. Carefully remove the glass shades if necessary to access the bulbs. Replace with new bulbs of the same type and wattage.
• Ayewo: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician.

8. Laasigbotitusita

If you encounter issues with your wall lantern, refer to the following common problems and solutions:

• Imọlẹ ko tan:
  • Check if the power is on at the circuit breaker or wall switch.
  • Ensure bulbs are securely screwed into the sockets and are not burnt out.
  • Verify electrical connections are secure (refer to Section 5).
• Imọlẹ flickers:
  • Rii daju pe awọn bulbs ti wa ni kikun di.
  • Ṣayẹwo awọn asopọ okun waya alaimuṣinṣin.
  • Test with new bulbs to rule out faulty bulbs.

If problems persist after troubleshooting, contact a qualified electrician or Craftmade customer support.

9. Atilẹyin ọja ati Support

This Craftmade Z1414-07 Wall Lantern includes a limited one-year warranty from the manufacturer, covering defects in materials and workmanship under normal use.

For technical assistance, warranty claims, or to inquire about replacement parts, please contact Craftmade customer service. Refer to your purchase documentation or the Craftmade official webAaye fun lọwọlọwọ alaye olubasọrọ.