Galcon 61562 DC-6S Battery Operated Irrigation Timer User Manual

Ọja Pariview

The Galcon 61562 DC-6S is a dependable battery-operated irrigation controller designed for remote locations without an electrical power source. It can be utilized for various irrigation needs, including sprinkler, drip, and plant propagation systems. Its robust, waterproof (IP-68) and UV-resistant construction ensures durability in harsh indoor and outdoor environments, even when installed inside a valve box.

This controller features an easy-to-operate LCD screen and four large buttons for simple programming. It supports daily or cyclic programs with flexible scheduling options, allowing irrigation durations as short as ten seconds or as long as 30 days, with up to four daily start times. The unit is designed to operate up to 6 irrigation control valves plus a master valve.

Awọn ẹya pataki pẹlu:

• Battery-operated for remote locations (uses two 9V batteries, typically lasting a full season).
• IP-68 waterproof grade and UV-resistant materials for durability.
• Supports up to 6 irrigation control valves + master valve.
• Highly programmable with flexible duration (10 seconds to 30 days) and up to 4 start times.
• Large LCD screen and intuitive buttons for easy operation.
• Mounts to valve's solenoid or to a wall.
• Rain sensor connection wire for water conservation (rain sensor NOT INCLUDED).

Figure 1: Galcon 61562 DC-6S Battery Operated Irrigation Timer.

Eto ati fifi sori

1. Awọn ẹya ara Idanimọ

Familiarize yourself with the main components of the irrigation controller.

Figure 2: Diagram showing the cover, push buttons, controller display, battery compartment cover, adaptor, mechanical operation lever, solenoid, and hydraulic valve.

2. Fifi sori batiri

The unit requires two 9V batteries for operation. These typically last a full season.

1. Open the battery compartment cover. This is typically a round cover on the side of the unit.
2. Fi awọn batiri 9V meji sii, ki o rii daju pe o peye polarity.
3. Replace the battery compartment cover. Ensure the pins are in place and rotate the cover approximately 1/8 of a turn to the right to secure it. Be careful not to break the battery cover pins.

Figure 3: Visual guide for opening the battery compartment and inserting the 9V battery.

3. iṣagbesori Aw

The controller offers two primary mounting methods:

• Solenoid Mount: The unit can slide directly onto a valve's solenoid that is already installed in your piping.
• Odi Odi: A separate wall-mount bracket is included. This bracket can be screwed to a wall, and the controller unit then clips securely onto it.

Figure 4: The Galcon DC-6S controller showing its wiring and the detachable mounting base, which can be used for solenoid or wall mounting.

4. Wiring the Unit

The controller comes with pre-wired leads for connecting to your irrigation valves. Each pair of red and black wires is marked for specific valves (e.g., Valve 1, Valve 2, etc.). There is also a yellow loop for a rain sensor connection.

• Connect the red and black wires from the controller to the corresponding valve solenoids.
• The yellow loop is for an optional rain sensor. If a rain sensor is used, it can be programmed to shut off irrigation for a set amount of time when rain is detected.

Figure 5: Close-up of the Galcon DC-6S showing the labeled wiring for different valves and the rain sensor loop.

Awọn ilana Iṣiṣẹ

The Galcon 61562 DC-6S is programmed using four main buttons: Enter, Right Arrow, Plus (+), and Minus (-).

Figure 6: The controller's interface with buttons for programming irrigation schedules.

1. Ṣiṣeto Akoko ati Ọjọ lọwọlọwọ

1. Open the controller's cover to reveal the LCD screen and buttons. The time display will be flashing.
2. Lo awọn Ọfà ọtun button to navigate to the hour setting. Use the Ni afikun (+) or Iyokuro (-) awọn bọtini lati ṣatunṣe awọn wakati.
3. Tẹ Ọfà ọtun again to navigate to the minute setting and adjust as needed.
4. Tẹ Ọfà ọtun to navigate to the day of the week. Use Ni afikun (+) or Iyokuro (-) to select the current day (M, Tu, W, Th, F, Sa, Su).
5. Tẹ Wọle to confirm the time and day settings.

2. Programming Irrigation Schedules (Valve-Specific)

You can program individual schedules for each valve (1-6) and the master valve.

1. Lo awọn Ọfà ọtun button to select the desired valve (1, 2, 3, 4, or Master). The selected valve number will flash.
2. Tẹ Wọle to begin programming for that valve.
3. Ṣeto Iye akoko: Lo Ni afikun (+) or Iyokuro (-) to set the irrigation duration in hours, minutes, or seconds. Press Ọfà ọtun to move between hours, minutes, and seconds. Durations can be as short as 10 seconds.
4. Set Days/Cycle: Tẹ Ọfà ọtun to move to the 'days' setting.
   • To set specific days of the week: Use Ni afikun (+) to select the desired days (e.g., M, W, F). The cursor will appear under the selected days.
   • To set a cyclical schedule (e.g., every X days): Use Ni afikun (+) or Iyokuro (-) to set the number of days in the cycle (e.g., '2' for every other day).
5. Ṣètò Àwọn Àkókò Ìbẹ̀rẹ̀: Tẹ Ọfà ọtun to move to 'Start 1'. Use Ni afikun (+) or Iyokuro (-) to set the first start time. You can set up to four start times (Start 1, Start 2, Start 3, Start 4). Navigate between them with the Ọfà ọtun.
6. Tẹ Wọle to save the settings for the current valve.

Example Programming from Video:

• Valve 1 (Misting/Propagation): 10 seconds duration, runs every 5 minutes on a cycle, starting at 8:10 AM. Irrigation window open from 8:00 AM to 5:00 PM.
• Valve 2 (Cyclical): 20 minutes duration, runs every 2 days, starting at 8:30 AM.
• Valve 3 (Specific Days): 30 minutes duration, runs on Monday, Wednesday, Friday. Two start times: 8:30 AM and 5:00 PM.

Figure 7: The controller's display showing various programming parameters like valve duration, days, and start times.

3. Rain Sensor Integration (Optional)

The controller has a dedicated connection for a rain sensor (not included). When a rain sensor is attached and activated, it can temporarily suspend irrigation to conserve water.

• Connect the rain sensor to the yellow loop wires on the controller.
• The controller can be programmed to shut off irrigation for a specified period (e.g., 24, 48, 72 hours) when the rain sensor is triggered.

Figure 8: The Galcon 6100 Series controller, highlighting its battery-powered nature and suitability for various applications including residential gardening and greenhouses.

Itoju

Batiri Rirọpo

The two 9V batteries typically last a full season. Replace them when the low battery indicator appears on the LCD screen or if the unit stops functioning as expected.

1. Gently open the battery compartment cover (refer to Setup section).
2. Remove the old batteries and insert new 9V batteries, ensuring correct polarity.
3. Ni aabo pa ideri kompaktimenti batiri ni aabo.

Figure 9: The IP68 rating ensures the controller can withstand indoor or outdoor weather conditions, contributing to its low maintenance needs.

Laasigbotitusita

While the Galcon 61562 DC-6S is designed for reliable operation, here are some common issues and their potential solutions:

• Unit Not Powering On / Display Blank: Check the 9V batteries. Ensure they are new and correctly installed. Replace if necessary.
• Irrigation Not Starting:
  • Verify that the current time and day are correctly set on the controller.
  • Check the programmed start times and durations for the specific valves.
  • Ensure the irrigation window (open/close times) allows for watering at the scheduled time.
  • If a rain sensor is connected, check if it's active and preventing irrigation.
  • Confirm that the valve solenoids are properly connected and functioning.
• Watering Duration Incorrect: Re-check the programmed duration for the affected valve in the settings.
• Watering on Wrong Days: Review the 'days' or 'cycle' settings for the specific valve to ensure they match your desired schedule.

For more complex issues, refer to the official user manual PDF linked in the Support section or contact Galcon customer support.

Awọn pato ọja

Official ọja Video

Watch this official video from the seller for a detailed overview and demonstration of the Galcon DC-6S irrigation timer, including setup and programming tips.

Atilẹyin ọja ati Support

For detailed warranty information, please refer to the official product documentation or contact Galcon customer support directly.

Awọn orisun afikun:

• Ṣe igbasilẹ Itọsọna olumulo (PDF)
• Visit the Official Galcon Store on Amazon

This product is designed for use only in the USA and Canada.