1. Ifihan
The Galcon 800248 AC-24 is a versatile modular controller designed for irrigation, fertigation, and low voltage lighting applications. It comes equipped with 8 stations and is expandable up to 24 stations using optional 4-station expansion modules (GAEC14203P0). This controller offers advanced programming flexibility, allowing for independent station operation or grouped operation across three distinct programs (A, B, and C).
This manual provides detailed instructions for the installation, programming, and maintenance of your Galcon AC-24 controller to ensure optimal performance and longevity.
olusin 1: Iwaju view of the Galcon AC-24 controller with the protective cover open, revealing the user interface. The interface includes a digital display, a central rotary dial for mode selection, and several push buttons for navigation and adjustment. The model number AC-800248 is visible on the lower right of the control panel.
2. Eto ati fifi sori
2.1 Iṣagbesori Adarí
The Galcon AC-24 controller is designed for both indoor and outdoor installation. Choose a location that is protected from direct sunlight and extreme weather conditions, yet easily accessible for programming and maintenance. Ensure the mounting surface is stable and capable of supporting the controller's weight.
- Securely mount the controller to a wall using appropriate screws and anchors.
- Ensure the controller is level to prevent moisture accumulation.
2.2 Awọn isopọ onirin
All wiring should be performed by a qualified electrician in accordance with local electrical codes. This product is designed for use only in the USA and Canada.
- Asopọ agbara: Connect the controller to a suitable AC power source.
- Wáyà fáfà: Connect each irrigation valve to its corresponding station terminal on the controller. Ensure common wires are connected to the common terminal.
- Sensor Connection (Optional): If using a rain sensor or flow sensor, connect it to the designated sensor terminals.
- Fertigation Valve (Optional): Connect the fertigation valve to its dedicated terminal if utilizing this feature.
- Kekere VoltagÌmọ́lẹ̀ e (Àṣàyàn): Fun kekere voltage lighting applications, a separate relay is required and must be connected to the controller's low voltage output. This relay is not included.
2.3 Expanding Stations
The AC-24 controller can be expanded from 8 to up to 24 stations. To expand, purchase optional 4-station expansion modules (GAEC14203P0) and follow the instructions provided with the modules for installation into the controller's expansion slots.
3. Awọn ilana Iṣiṣẹ
The controller features a rotary dial and push buttons for navigation and programming. The dial selects the programming mode, and the buttons are used to adjust values and confirm selections.
3.1 Initial Setup and Time/Day Setting
- Yi ipe kiakia Rotari si TIME/DAY.
- Lo awọn + ati - buttons to set the current time and day of the week.
- Tẹ awọn → bọtini lati jẹrisi ati gbe lọ si eto atẹle.
3.2 Programming Irrigation (Programs A, B, C)
The controller allows for three independent programs (A, B, C) which can be set as weekly or cyclic. Each program can have up to 4 start times per day.
- Yi ipe kiakia Rotari si ETO.
- Select the desired program (A, B, or C) using the + ati - awọn bọtini.
- Tan ipe naa si WEEKLY/CYCLIC to choose the program type.
- Tan ipe naa si BERE to set up to 4 daily start times for the selected program.
- Tan ipe naa si VALVES to assign specific valves to the program.
- Tan ipe naa si Àkókò to set the irrigation duration for each assigned valve (1 minute to 9 hours).
- For weekly programs, select the days of the week for irrigation. For cyclic programs, set the cycle interval (1 to 30 days).
3.3 Independent Program (I)
The controller also features an independent program (I) for specific applications like low voltage lighting or pond pumps. This program operates independently of irrigation schedules and rain delays.
- Yi ipe kiakia Rotari si INDEPENDENT I.
- Set the start time, duration, and frequency (weekly or cyclic) for the independent program.
3.4 Awọn iṣẹ pataki
- Fertigation Control: Tan ipe naa si FERTILIZER. Assign a percentage of run time for fertilizer injection to individual valves. The fertilizer valve will activate after a calculated delay and stop before the irrigation cycle ends.
- Idaduro Ojo: Tan ipe naa si OJO PA. Set a programmable "rain off" period up to 240 days to suspend irrigation.
- Seasonal Adjustment (Water Budget): Tan ipe naa si WATER BUDGET. Adjust irrigation duration from 10% to 190% to compensate for seasonal changes without reprogramming.
- Isẹ afọwọṣe: Tan ipe naa si Afọwọṣe to manually operate individual valves or all valves for a set duration.
- Test/Reset: Tan ipe naa si Idanwo/Tuntunto for system testing or to reset programming.
4. Itọju
The Galcon AC-24 controller is designed for durability and requires minimal maintenance. Regular checks can help ensure its long-term performance.
- Keep the controller's exterior clean and free from dust and debris. Use a soft, damp asọ fun ninu.
- Ṣe àyẹ̀wò gbogbo àwọn ìsopọ̀ wáyà láti rí i dájú pé wọ́n wà ní ààbò àti pé wọn kò ní ìbàjẹ́.
- Ensure the protective cover is properly closed when not accessing the controls to protect against environmental elements.
- In regions with freezing temperatures, ensure the system is properly winterized to prevent damage to valves and pipes.
5. Laasigbotitusita
This section addresses common issues you might encounter with your Galcon AC-24 controller.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan oludari jẹ ofo. | No power supply; faulty transformer; internal fuse. | Check power outlet and connections. Verify transformer output. Consult a qualified technician if fuse replacement is suspected. |
| Valves not activating. | Incorrect programming; wiring issue; faulty solenoid; rain sensor active. | Verify program settings (start times, durations, assigned valves). Check wiring to valves and common. Test solenoids. Check if rain delay is active or sensor is preventing operation. |
| Ìṣòro sísọ̀rọ̀. | Unfamiliarity with interface; incorrect dial position. | Refer to Section 3: Operating Instructions. Ensure the dial is in the correct position for the desired setting. Practice navigating the menus. |
| Watering occurs at unexpected times. | Incorrect start times; multiple programs active; independent program running. | Review all program start times (A, B, C, and Independent I). Ensure only desired programs are enabled. |
6. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | GAECS900208 (AC-24) |
| Initial Stations | 8 |
| Awọn Ibusọ ti o pọju | 24 (with optional 4-station expansion modules GAEC14203P0) |
| Awọn eto | 3 (A, B, C) weekly or cyclic, plus 1 independent (I) program |
| Start Times per Program | Up to 4 per day |
| Irrigation Duration | Iṣẹju 1 si awọn wakati 9 |
| Cyclic Interval | Every 1 day up to every 30 days |
| Ti igba tolesese | 10% si 190% |
| Idaduro Ojo | Titi di ọjọ mẹwa 240 |
| Fertigation Control | Yes, percentage of run time |
| Kekere Voltage Iṣakoso ina | Yes (requires separate relay, not included) |
| Ọja Mefa | 12.45 x 23.11 x 29.72 cm |
| Iwọn Nkan | 2.23 kg |
| Apẹrẹ Fun | USA ati Canada nikan |
7. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Galcon webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
For further assistance, contact Galcon customer service. Contact details are typically available on the manufacturer's webaaye tabi apoti ọja.
