Elero Roltop M-868 / -K Wireless Pipe Drive

1. Ifihan ati Ọja Loriview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Elero Roltop M-868 / -K wireless pipe drive. This device is designed for use with roller shutters, blinds, and screens, offering a robust and intelligent solution for automated window coverings.

The Roltop M-868 / -K features mechatronic end-position detection with soft-stop functionality, intelligent force measurement, and bidirectional radio communication at 868 MHz with an automatic routing function. It is designed for shafts from Ø 50 mm and comes with an adapter set for SW60 shafts.

Figure 1: Elero Roltop M-868 / -K Wireless Pipe Drive. This image shows the cylindrical motor unit with an orange and black end cap, and a power cable extending from it.

2. Awọn ilana aabo

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product.

• Aabo Itanna: Installation and electrical connections must be performed by a qualified electrician in accordance with local regulations. Disconnect power before any installation or maintenance work.
• Awọn ẹya gbigbe: Jeki ọwọ, irun, ati aṣọ alaimuṣinṣin kuro lati awọn ẹya gbigbe lakoko iṣẹ.
• Awọn ọmọde ati awọn ohun ọsin: Keep children and pets away from the operating area of the roller shutter/blind. Do not allow them to play with the controls.
• Awọn ipo Ayika: Do not expose the drive to extreme temperatures, moisture, or corrosive substances.
• Lilo ti a pinnu: Use the drive only for its intended purpose as described in this manual.

3. Awọn ẹya Ọja

The Elero Roltop M-868 / -K offers a range of advanced features:

• Ohun elo: Pipe drive specifically designed for roller shutters, blinds, and screens.
• End Position Detection: Mechatronic end-position detection with soft-stop functionality.
• Isẹ idakẹjẹ: Silent soft brake up to 20 Nm.
• Intelligent Force Measurement: Ensures smooth and safe operation.
• Idaabobo Aṣọ: Features fabric protection for both up and down movements, and free travel.
• End Position Relief: Can be activated at the end position.
• Adjustable End Positions: End positions can be set via mounting cable or handheld transmitter.
• Shaft Size Compatibility: Suitable for shafts from Ø 50 mm. Supplied with an adapter set for SW60 shafts.
• Radio Communication: Bidirectional 868 MHz radio with automatic routing function.
• Asopọmọra: Includes a 2.0-meter plug-in connection cable.

4. Eto ati fifi sori

Installation should be carried out by a qualified professional. Ensure all safety precautions are followed.

1. Igbaradi: Ensure the power supply to the installation area is disconnected. Verify the shaft size is compatible (Ø 50 mm or use the provided SW60 adapter).
2. Iṣagbesori: Insert the pipe drive into the roller shutter shaft. Secure it according to the specific roller shutter system's requirements. The drive is supplied without motor bearings, which must be provided by the installer.
3. Asopọmọra itanna: Connect the 2.0-meter plug-in cable to the power supply according to the wiring diagram provided with the product packaging. Ensure correct polarity and grounding.
4. End Position Setting: Once physically installed and powered, set the upper and lower end positions using either the mounting cable or a compatible handheld transmitter. Refer to the specific instructions for your Elero control unit for detailed programming steps.
5. Idanwo: Perform several test runs to ensure the drive operates smoothly and stops correctly at the set end positions. Check for any unusual noises or movements.

Figure 2: Technical data and dimensions for Elero Roltop M-series drives. This image displays a table with various models (M7/23-868, M10-868, M12/23-868, M20-868, M30-868, M40-868, M50-868) and their specifications such as rated voltage, frequency, torque, speed, current, power, shaft diameter, IP rating, end switch range, operating duration, length, weight, and operating temperature. Below the table, a schematic diagram shows the dimensions of the motor.

5. Awọn ilana Iṣiṣẹ

The Elero Roltop M-868 / -K is operated via a compatible Elero handheld transmitter or wall switch (not included). The bidirectional 868 MHz radio system ensures reliable communication.

• Isẹ ipilẹ: Use the UP/DOWN buttons on your Elero control unit to move the roller shutter/blind. A STOP button is typically available to halt movement at any desired position.
• Automatic Routing: The integrated automatic routing function enhances signal reliability within your Elero radio network.
• Programming Additional Functions: Refer to the manual of your specific Elero control unit for instructions on programming intermediate positions, timer functions, or integrating into smart home systems.

6. Itọju

The Elero Roltop M-868 / -K is designed for long-term, maintenance-free operation. However, regular checks can help ensure optimal performance.

• Ninu: Keep the visible parts of the drive and the roller shutter/blind clean. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ayewo: Periodically check the roller shutter/blind for any obstructions, damage to the fabric, or unusual noises during operation.
• Iṣẹ Ọjọgbọn: If you notice any significant issues or malfunctions, contact a qualified service technician. Do not attempt to open or repair the drive yourself.

7. Laasigbotitusita

If you encounter problems with your Elero Roltop M-868 / -K, consider the following common issues:

• Drive Not Responding:
  • Ṣayẹwo boya ipese agbara ti wa ni asopọ ati ṣiṣe.
  • Ensure the control unit (handheld transmitter/wall switch) has working batteries or power.
  • Verify the control unit is correctly paired with the drive. Refer to your control unit's manual for pairing instructions.
• Incorrect End Positions:
  • The end positions may need to be re-programmed. Follow the end position setting procedure in your control unit's manual.
• Awọn Ariwo Alailẹgbẹ Lakoko Iṣiṣẹ:
  • Check for any obstructions in the roller shutter/blind path.
  • Ensure the shaft and mounting components are securely fastened.
  • If the noise persists, contact a qualified technician.
• Iṣiṣẹ Laarin:
  • This could indicate signal interference. Ensure the control unit is within range and there are no major obstacles.
  • Check for other devices operating on similar frequencies.

For issues not covered here, please contact Elero customer support or a certified service partner.

8. Awọn pato

Key technical specifications for the Elero Roltop M-series pipe drives:

Note: Specific values for other models (M7/23-868, M12/23-868, M20-868, M30-868, M40-868, M50-868) can be found in Figure 2.

9. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Elero products typically come with a manufacturer's warranty covering defects in materials and workmanship.

For technical support, spare parts, or service inquiries, please contact your authorized Elero dealer or visit the official Elero website for contact information. When contacting support, please have your product model (RolTop M10-868) and serial number (if applicable) ready.