Elero MonoTel 2 Remote Control User Manual

1. Ifihan

The Elero MonoTel 2 is a pure white, 1-channel remote control operating at an 868 MHz wireless radio frequency. It is designed for convenient control of roller shutters, blinds, and awnings. This manual provides essential information for the setup, operation, and maintenance of your device.

olusin 1: Iwaju view of the Elero MonoTel 2 Remote Control. The device is white with a dark grey base, featuring three central buttons: an upper square button, a circular button with an orange ring, and a lower square button. The Elero logo is visible on the dark grey base.

2. Key Awọn ẹya ara ẹrọ

• Easy-to-use On/Off Buttons: Designed for intuitive control with a clear LED viewwindow window.
• Magnetic Wall Mount: For convenient storage and accessibility.
• Batiri Agbara: Uses common batteries (not included).
• Ibamu Wapọ: Supports both unidirectional and bidirectional radio systems.
• Awọn aṣayan Iṣakoso ilọsiwaju: Allows for intermediate positioning and ventilation functions.

3. Eto

3.1. Fifi sori batiri

1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
2. Ṣii ideri iyẹwu naa.
3. Insert the required common batteries, ensuring correct polarity (+/-).
4. Pa ideri batiri naa ni aabo.

3.2. Pairing with Receiver

Refer to the instruction manual of your Elero receiver (e.g., for roller shutters, blinds, or awnings) for specific pairing procedures. Generally, this involves:

• Activating the programming mode on your receiver.
• Pressing a specific button sequence on the MonoTel 2 remote control within a set timeframe.
• Confirming successful pairing, often indicated by an LED on the receiver or the remote.

3.3. Wall Mount fifi sori

The MonoTel 2 comes with a magnetic wall mount. Choose a suitable location, ensuring it is within range of your controlled devices. Secure the wall mount using appropriate screws (not included) and then simply attach the remote control to the magnetic mount.

4. Awọn ilana Iṣiṣẹ

The MonoTel 2 remote control features three primary buttons for operation:

• Upper Square Button: Typically used for Up or Ṣii functions (e.g., raising a shutter).
• Circular Button (with orange ring): Awọn iṣẹ bi awọn Duro or Ipo agbedemeji button. Pressing it during movement will stop the device. A quick press can activate a pre-set intermediate position.
• Lower Square Button: Typically used for Isalẹ or Sunmọ functions (e.g., lowering a shutter).

4.1. Iṣakoso Ipilẹ

• To move the device up/open: Tẹ awọn Upper Square Button.
• To move the device down/close: Tẹ awọn Lower Square Button.
• Si Duro the device: Press the Circular Button nigba gbigbe.

4.2. Intermediate Position and Ventilation

If configured with your receiver, a short press of the Circular Button can activate a pre-programmed intermediate position. Consult your receiver's manual for programming these advanced functions.

5. Itọju

5.1. Ninu

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

5.2. Batiri Rirọpo

When the LED viewing window indicates low battery or the remote's range decreases, replace the batteries as described in the "Battery Installation" section (3.1). Dispose of old batteries responsibly according to local regulations.

6. Laasigbotitusita

7. Awọn pato

8. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elero webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Manufacturer: Elero