AIRAM 79W 80mm Linear Halogen Bulb Instruction Manual

1. Ifihan

This manual provides essential instructions for the safe installation, operation, and maintenance of your AIRAM 79W 80mm Linear Halogen Bulb. Please read this manual thoroughly before use and retain it for future reference.

2. Alaye Aabo

Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lati yago fun ipalara tabi ibajẹ:

• Agbara Pa: Always ensure the power supply to the fixture is switched off at the mains before installing, removing, or cleaning the bulb.
• Fara bale: Allow the bulb to cool completely before handling. Halogen bulbs operate at high temperatures and can cause severe burns.
• Mimu to tọ: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves.
• Correct Wattage: Lo awọn isusu nikan pẹlu wat to tọtage ati voltage for your fixture. Exceeding the maximum wattage le fa igbona pupọju ati ina.
• Idasonu: Sọ awọn isubu ti a lo ni ibamu si awọn ilana agbegbe.
• Lilo inu ile: This bulb is designed for indoor use unless specified otherwise by the fixture.

3. Ọja Ipariview

The AIRAM 79W 80mm Linear Halogen Bulb is an energy-efficient light source designed for various lighting applications. It provides a warm white light with a luminous flux of 1000 lumens, equivalent to a 100-watt incandescent bulb. Its linear design and R7s base make it suitable for specific linear halogen fixtures.

Image: A clear glass linear halogen bulb with white ceramic R7s end caps. The bulb features a filament running through its center and is designed for specific fixtures requiring an 80mm linear bulb.

4. Eto ati fifi sori

Follow these steps to safely install your linear halogen bulb:

1. Pa Agbara: Locate the light fixture's power switch and turn it off. For added safety, switch off the circuit breaker supplying power to the fixture.
2. Gba Itutu: If replacing an old bulb, wait for it to cool down completely before touching it.
3. Yọ Bulb atijọ kuro (ti o ba wulo): Carefully remove the old bulb from the fixture. Linear halogen bulbs typically have spring-loaded contacts. Gently push one end of the bulb towards the opposite contact and then pull it out.
4. Fi Bọlubu Tuntun sii: Holding the new AIRAM bulb with a clean cloth or gloves, align one end of the bulb with one of the R7s contacts in the fixture. Gently push the bulb towards that contact, compressing the spring, and then guide the other end into the opposite contact. Ensure both ends are securely seated.
5. Pada Agbara pada: Once the bulb is securely in place, restore power to the fixture at the circuit breaker and then turn on the light switch.

5. Awọn ilana Iṣiṣẹ

The AIRAM 79W 80mm Linear Halogen Bulb operates immediately upon receiving power. Simply use the light switch connected to your fixture to turn the bulb on or off. No special operating procedures are required.

6. Itọju

Minimal maintenance is required for your halogen bulb:

• Ninu: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners.
• Rọpo: Replace the bulb when it reaches the end of its lifespan or fails. Refer to the installation section for replacement instructions.

7. Laasigbotitusita

If your AIRAM halogen bulb is not functioning correctly, consider the following:

• Bulb Ko Imọlẹ:
  • Ṣayẹwo boya agbara agbara ba wa ni titan.
  • Verify that the circuit breaker for the fixture is not tripped.
  • Ensure the bulb is correctly and securely seated in the fixture's contacts.
  • Ó ṣeé ṣe kí gílóòbù náà ti dé òpin ìgbésí ayé rẹ̀, ó sì nílò àtúnṣe.
• Imọlẹ didan:
  • Check for loose connections in the fixture or bulb contacts.
  • Ensure the bulb is fully compatible with any dimmer switches in use.

Tí ìṣòro bá ń bá a lọ lẹ́yìn tí a bá ti ṣàyẹ̀wò àwọn kókó wọ̀nyí, kan sí onímọ̀ ẹ̀rọ iná mànàmáná tó mọ̀ nípa rẹ̀.

8. Awọn pato

9. Atilẹyin ọja ati Support

Fun alaye atilẹyin ọja tabi atilẹyin imọ-ẹrọ, jọwọ tọka si oniṣowo tabi osise olupese. webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.