1. Ifihan
Thank you for choosing the ABAC Air Compressor 50L, 2 HP, Model 4116024262. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your air compressor. Please read this manual thoroughly before operating the unit and keep it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and extend the lifespan of your equipment.
2. Alaye Aabo
Operating an air compressor requires adherence to strict safety guidelines to prevent injury or damage. Always prioritize safety.
- Aabo Itanna: Ensure the compressor is connected to a grounded outlet with the correct voltage (230 Volts). Do not use extension cords unless absolutely necessary, and ensure they are rated for the compressor's power requirements.
- Aabo Titẹ: Never exceed the maximum operating pressure of the compressor or any attached air tools. Regularly inspect hoses and fittings for wear or damage. Do not direct compressed air at people or animals.
- Awọn ẹya gbigbe: Keep hands, hair, and clothing clear of moving parts such as belts and fans. The compressor is belt-driven, so exercise caution.
- Afẹfẹ: Operate the compressor in a well-ventilated area to prevent overheating and ensure proper air intake.
- Idaabobo igbọran: Air compressors can be noisy. Always wear appropriate hearing protection during operation.
- Idaabobo Oju: Always wear safety glasses or goggles when operating the compressor or using air tools.
- Sisan omi: Regularly drain condensation from the air tank to prevent corrosion and maintain air quality.
- Iduroṣinṣin: Rí i dájú pé a gbé ìkọ́rọ̀mọ́ náà sí orí ilẹ̀ tí ó dúró ṣinṣin, tí ó tẹ́jú láti dènà kí ó rì.
3. Ọja Ipariview
The ABAC 50L, 2 HP Air Compressor (Model 4116024262) is a robust, belt-driven twin-cylinder unit designed for various applications. It features a 50-liter tank, a 2 HP motor, and a maximum pressure of 10 bar. Its low-rotation motor ensures high reliability and extended lifespan. The unit is equipped with wheels and a handle for easy portability.
Nọmba 1: ABAC 50-liter, 2 HP Air Compressor. This image displays the ABAC 50-liter air compressor. It features a blue horizontal air tank, a black motor and pump housing on top, two wheels for portability, and a handle for easy maneuvering. Visible components include the pressure gauge, regulator, and air outlet.
4. Eto
- Ṣii silẹ: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
- Ṣayẹwo Ẹka: Ensure all components are present, including the electrical cable.
- Wheel and Handle Assembly: Attach the wheels and handle as per the diagrams (if provided in a separate assembly guide, otherwise assume pre-assembled for this model). The compressor is designed with a cart for mobility.
- Ibi: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
- Asopọmọra itanna: Connect the compressor to a suitable 230 Volt, grounded power outlet. Verify that the power supply matches the compressor's requirements.
- Ayẹwo akọkọ: Before first use, check all connections for tightness and ensure the oil level (if applicable for this model) is correct.
5. Awọn ilana Iṣiṣẹ
- Bíbẹ̀rẹ̀ kọ̀mpútà:
- Ensure the main power switch is in the "OFF" position before plugging in.
- Plug the compressor into the appropriate electrical outlet.
- Turn the main power switch to the "ON" position. The compressor will start to build pressure until it reaches its cut-off pressure.
- Ipa ti n ṣatunṣe:
- Use the pressure regulator knob to set the desired output pressure for your air tools. The pressure gauge will indicate the regulated output pressure.
- Always refer to your air tool's specifications for recommended operating pressure.
- Nsopọ Awọn irinṣẹ afẹfẹ:
- Attach your air hose to the compressor's air outlet.
- Connect your air tool to the other end of the hose. Ensure all connections are secure.
- Tiipa:
- Yi iyipada agbara akọkọ pada si ipo "PA".
- Yọ compressor kuro lati inu ibudo agbara.
- Bleed any remaining air pressure from the tank by opening the drain valve or using an air tool until the pressure gauge reads zero.
6. Itọju
Regular maintenance is crucial for the longevity and safe operation of your ABAC air compressor.
- Lojoojumọ/Lẹhin Lilo Kọọkan:
- Imugbẹ Imugbẹ: With the compressor off and tank pressure relieved, open the drain valve at the bottom of the tank to release accumulated moisture. Close the valve securely afterward.
- Weekly/Every 10-20 Operating Hours:
- Ṣayẹwo Ipele Epo: For oil-lubricated models, ensure the oil level is within the recommended range on the dipstick or sight glass. Top up with appropriate compressor oil if necessary.
- Inspect Air Filter: Check the air intake filter for dirt and debris. Clean or replace if clogged to ensure efficient operation.
- Monthly/Every 50 Operating Hours:
- Ṣayẹwo awọn igbanu: Check the drive belt for tension, wear, and cracks. Adjust tension or replace if needed. (This model is belt-driven).
- Ṣayẹwo Awọn ohun elo: Rii daju pe gbogbo awọn eso, awọn boluti, ati awọn ohun elo ti wa ni wiwọ.
- Annually/Every 200 Operating Hours:
- Yi Epo pada: Replace the compressor oil with new, recommended compressor oil.
- Ayẹwo Ọjọgbọn: Consider having a qualified technician inspect the compressor for wear and tear on critical components.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Compressor ko bẹrẹ | No power, tripped circuit breaker, faulty switch, low voltage. | Check power connection, reset breaker, inspect switch, ensure proper voltage ipese. |
| Kọ̀mpútà máa ń ṣiṣẹ́ nígbà gbogbo tàbí ó máa ń yípo nígbà gbogbo ju bó ṣe yẹ lọ | Air leak in tank or fittings, faulty pressure switch, clogged air filter. | Check for leaks (use soapy water), inspect/replace pressure switch, clean/replace air filter. |
| Ìjáde titẹ afẹfẹ kekere | Clogged air filter, air leaks, worn piston rings/valves, incorrect regulator setting. | Clean/replace air filter, check for leaks, inspect internal components (professional service recommended), adjust regulator. |
| Ariwo pupọ tabi gbigbọn | Loose components, worn bearings, unbalanced motor/pump, worn belt. | Tighten fasteners, inspect bearings, check motor/pump mounting, inspect/replace belt. |
| Oil in discharge air (if oil-lubricated) | Overfilled oil, worn piston rings, faulty check valve. | Check oil level and drain excess, professional service for internal components. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.
8. Awọn pato
| Ẹya ara ẹrọ | Iye |
|---|---|
| Brand | ABAC |
| Nọmba awoṣe | 4116024262 |
| Orisun agbara | Itanna |
| Voltage | 230 Volts |
| Agbara to pọju | 2 Ẹṣin (HP) |
| Agbara mọto | 2 ẹṣin agbara |
| Agbara Omi Agbara | 50 liters |
| Air Sisan Agbara | 255 liters fun iseju |
| Ipa ti o pọju | 10 Pẹpẹ |
| RPM | 1075 rpm |
| Iwọn | 49 kg (110.23 lbs) |
| Awọn iwọn (L x W x H) | 870 x 370 x 780 mm |
| Awọn irinše to wa | Okun itanna |
| Silinda Iru | Twin-cylinder |
| Wakọ Iru | Igbanu-ìṣó |
Note: Air flow capacity is listed as 255 L/min in the product description and 10 L/min in the specifications. The 255 L/min value is more typical for a 2 HP compressor. Please refer to the product label for the most accurate information.
9. Atilẹyin ọja ati Support
For warranty information, technical support, or spare parts inquiries, please contact your ABAC dealer or visit the official ABAC webAaye ayelujara. Jeki iwe-ẹri rira rẹ ati nọmba awoṣe (4116024262) wa ni ọwọ nigbati o ba kan si atilẹyin.
ABAC is committed to providing reliable products and customer satisfaction. For further assistance, refer to the contact details provided with your purchase or on the manufacturer's official channels.
