Corsair Vengeance Airflow Memory Cooling Fan CMYAF - Instruction Manual

1. Ti pariview

The Corsair Vengeance Airflow Memory Cooling Fan CMYAF is designed to provide active cooling for your system's RAM modules. This device helps to reduce memory temperatures, which can be beneficial for system stability and performance, especially in overclocked configurations or systems with high-performance memory. It features a compact design that clips onto your RAM slots, directing airflow directly over the memory modules.

olusin 1: Iwaju view of the Corsair Vengeance Airflow Memory Cooling Fan.

2. Key Awọn ẹya ara ẹrọ

• Itutu ti o munadoko: Features a 60mm fan designed to deliver targeted airflow to memory modules.
• Iyara Olufẹ Atunṣe: Operates at 3500 RPM or 2500 RPM using the included speed control cable, allowing for a balance between cooling performance and noise level.
• Isẹ idakẹjẹ: Engineered for low noise output, with a typical noise level of 21.0 dB(A) and a maximum of 25 dB(A).
• Apẹrẹ ti o tọ: Utilizes a ball bearing fan for extended operational life, rated at 80,000 hours at 25°C.
• Asefarabalẹ: Includes interchangeable fan shroud covers in red, blue, and silver to match various system builds.
• Ibamu gbooro: Designed for desktop systems, compatible with various DDR memory types.
• Fifi sori Rọrun: Clips directly onto existing RAM slot retention clips for secure mounting.

olusin 2: Top-isalẹ view showing the fan and Vengeance Airflow branding.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn paati wa ninu package rẹ:

• Corsair Vengeance Airflow Memory Cooling Fan unit
• Speed control cable (for 2500 RPM operation)
• Interchangeable fan shroud covers (Red, Blue, Silver)
• Installation clips/brackets

Figure 3: The Corsair Vengeance Airflow Memory Cooling Fan as packaged.

4. Itọsọna fifi sori ẹrọ

Kí o tó bẹ̀rẹ̀ sí í fi sori ẹrọ, rí i dájú pé kọ̀ǹpútà rẹ ti pa àti pé ó ti yọ ìdènà ògiri kúrò. A gba ọ nímọ̀ràn láti wọ okùn ọwọ́ tí ó ní ìdènà láti dènà ìjáde electrostatic (ESD) láti ba àwọn èròjà jẹ́.

4.1 Ngbaradi Eto Rẹ

1. Power down your computer and disconnect the power cable.
2. Open your computer case to access the motherboard and RAM slots.
3. Identify the RAM modules you wish to cool. Ensure there is adequate clearance above and around the memory slots for the cooling unit.

4.2 Mounting the Cooling Fan

1. Attach the provided installation clips/brackets to the Corsair Vengeance Airflow unit. These clips are designed to secure the unit to the RAM slot retention clips on your motherboard.
2. Carefully position the cooling unit over your RAM modules. The fan should be oriented to blow air directly onto the memory.
3. Gently press the installation clips onto the retention clips of your RAM slots until they securely snap into place. Ensure the unit is stable and does not wobble.
4. Adjust the position of the cooling unit if necessary to optimize airflow and clearance with other components (e.g., CPU cooler, graphics card). The mounting legs are often adjustable to accommodate different spacing.

4.3 Nsopọ Agbara

1. Locate an available 3-pin or 4-pin fan header on your motherboard or a fan controller.
2. Connect the fan's power cable to the chosen header.
3. If you wish to operate the fan at a reduced speed (2500 RPM), use the included speed control cable. Connect this cable between the fan's power cable and the motherboard header. For full speed (3500 RPM), connect the fan directly.

4.4 Customizing Appearance (Optional)

• The unit comes with interchangeable fan shroud covers in red, blue, and silver. To change the cover, gently remove the current cover and snap the desired color cover into place.

After installation, close your computer case, reconnect the power cable, and power on your system.

5. Isẹ

Once installed and powered, the Corsair Vengeance Airflow Memory Cooling Fan operates continuously to provide cooling to your RAM modules. The fan speed will depend on whether the speed control cable is used.

• Standard Operation (3500 RPM): When connected directly to a 3-pin or 4-pin fan header without the speed control cable, the fan will operate at its maximum speed of approximately 3500 RPM. This provides maximum cooling performance.
• Reduced Speed Operation (2500 RPM): When the included speed control cable is used, the fan's speed is reduced to approximately 2500 RPM. This setting offers quieter operation while still providing effective cooling.

Monitor your memory temperatures using system monitoring software to determine the optimal fan speed setting for your system's needs.

6. Itọju

Regular maintenance ensures optimal performance and longevity of your cooling fan.

• Yiyọ eruku kuro: Periodically inspect the fan blades and shroud for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
• Ilana mimọ:
  1. Pa kọmputa rẹ kuro ki o ge asopọ okun agbara.
  2. Use compressed air to gently blow dust off the fan blades and surrounding areas. Hold the fan blades stationary while using compressed air to prevent over-spinning and potential damage to the bearing.
  3. For stubborn dust, a soft brush or cotton swab can be used. Avoid using liquids or harsh chemicals.
• Ayewo: Check the mounting clips periodically to ensure the unit remains securely attached to the RAM slots.

7. Laasigbotitusita

8. Imọ ni pato

9. Atilẹyin ọja ati Support

Corsair products are designed for reliability and performance. For specific warranty information regarding your Corsair Vengeance Airflow Memory Cooling Fan CMYAF, please refer to the warranty card included with your product or visit the official Corsair webojula.

Oluranlowo lati tun nkan se: If you encounter any issues or have questions not covered in this manual, please contact Corsair customer support. You can find support resources, FAQs, and contact information on the official Corsair webojula: www.corsair.com/support

Please have your product model number (CMYAF) and purchase information ready when contacting support.