Ìwé Ìtọ́sọ́nà Olùlò Ẹ̀rọ Ìwòran Káàdì Bluetooth KOAMTAC KDC350Li-MO-3K-R2

1. Ifihan

This manual provides essential information for the safe and efficient operation of your KOAMTAC KDC350Li-MO-3K-R2 Bluetooth Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance.

2. Package Awọn akoonu

Daju pe gbogbo awọn ohun kan wa ninu akopọ ọja rẹ:

• KDC350Li-MO-3K-R2 Barcode Scanner
• Amupadabọ Lanyard
• USB agbara / Ibaraẹnisọrọ Cable
• Product CD (containing drivers and software)

3. Ẹrọ Loriview

Familiarize yourself with the components of your KDC350Li-MO-3K-R2 scanner.

Aworan 1: Iwaju view of the KDC350Li-MO-3K-R2 scanner. The device features an OLED display at the top, showing 'KoamTac Data Collector KDC350_3key'. Below the screen are two green indicator lights. In the middle section, a prominent circular 'SCAN' button is flanked by two navigation keys on each side (left and right arrows). The KOAMTAC logo is visible at the bottom.

Awọn eroja pataki:

• Ifihan OLED: Shows device status, scanned data, and menu options.
• Bọtini SCAN: Activates the barcode scanning laser.
• Awọn bọtini lilọ kiri: Used to navigate through menus and options on the OLED display.
• Awọn imọlẹ Atọka: Provide visual feedback on power, battery, and connection status.

4. Eto

4.1. Ngba agbara si Batiri naa

Before initial use, fully charge the KDC350Li-MO-3K-R2 scanner.

1. Connect the small end of the USB charge/communication cable to the KDC350's charging port.
2. So opin nla ti okun USB pọ si ohun ti nmu badọgba agbara USB (kii ṣe pẹlu) tabi ibudo USB ti kọnputa kan.
3. Ina atọka naa yoo fi ipo gbigba agbara han. Gbigba agbara kikun maa n gba to wakati meji si mẹta.

4.2. Agbara lori / Paa

• Lati Fi agbara: Press and hold the SCAN button for approximately 3 seconds until the display illuminates.
• Lati Paarẹ: Navigate to the 'Power Off' option in the device menu using the navigation keys and confirm, or press and hold the SCAN button for approximately 5 seconds.

5. Awọn ilana Iṣiṣẹ

5.1. Basic Barcode Scanning

Lati ọlọjẹ kooduopo kan:

1. Point the scanner's laser aperture at the barcode.
2. Press and hold the SCAN button. A red laser line will appear.
3. Align the laser line across the entire barcode.
4. Upon successful scan, the scanner will emit a beep, and the scanned data will appear on the OLED display.
5. Tu bọtini SCAN silẹ.

5.2. Using the OLED Display and Navigation

The OLED display provides real-time information and access to device settings. Use the left and right navigation keys to scroll through menu options and select items.

6. Bluetooth Asopọmọra

The KDC350Li-MO-3K-R2 supports Bluetooth connectivity for wireless data transfer to host devices such as smartphones, laptops, and desktops.

6.1. Pairing Modes

The scanner supports various Bluetooth profiles:

• HID (Human Interface Device): Functions as a keyboard, sending scanned data directly to any application with a cursor. No special software is required on the host device.
• SPP (Serial Port Profile): Requires a KTSync application or custom software on the host device to receive data. Offers more control over data handling.
• MFi (Made For iPhone/iPad): Specific profile for iOS devices, often referred to as iOS Bluetooth.

6.2. Pairing with a Host Device

1. Ensure the KDC350 is powered on.
2. On the KDC350, navigate to the 'Bluetooth' menu and select the desired pairing mode (e.g., HID, SPP, iOS).
3. The scanner will enter pairing mode and become discoverable.
4. Lórí ẹ̀rọ ìgbàlejò rẹ (fóònù alágbékalẹ̀, tábìlẹ́ẹ̀tì, kọ̀ǹpútà), mu Bluetooth ṣiṣẹ́ kí o sì wá àwọn ẹ̀rọ tó wà.
5. Select 'KDC350' from the list of discovered devices.
6. Follow any on-screen prompts to complete the pairing process. A successful connection will be indicated on the KDC350's display and by an indicator light.

7. Itọju

7.1. Ninu ẹrọ

To maintain optimal performance, keep the scanner clean.

• Lo asọ asọ, ti ko ni lint die-die dampened pẹlu omi tabi kan ìwọnba ninu ojutu.
• Ma ṣe lo awọn afọmọ abrasive, nkanmimu, tabi awọn kẹmika lile.
• Ensure the scanning window is free of dust and smudges for accurate scanning.

7.2. Itọju batiri

Lati pẹ igbesi aye batiri:

• Yago fun awọn iwọn otutu to gaju.
• Gba agbara si batiri nigbagbogbo, ṣugbọn yago fun fifi silẹ ni kikun fun igba pipẹ.
• If storing the device for a long time, charge it to about 50% before storage.

8. Laasigbotitusita

If you encounter issues with your KDC350Li-MO-3K-R2, refer to the following common problems and solutions:

• Ẹrọ ko ṣiṣẹ lori: Rii daju pe batiri ti gba agbara. Sopọ si orisun agbara ati gbiyanju lẹẹkansi.
• Cannot scan barcodes: Check if the laser is active. Ensure the barcode is not damaged and is within the scanner's range. Clean the scanning window.
• Awọn iṣoro asopọ Bluetooth: Ensure Bluetooth is enabled on both the scanner and the host device. Verify the correct pairing mode is selected. Try unpairing and re-pairing the devices.
• Scanned data not appearing on host device: Confirm successful Bluetooth pairing. If using HID mode, ensure the cursor is in a text field. If using SPP, verify the KTSync application or custom software is running and configured correctly.

For further assistance, consult the KOAMTAC webojula tabi kan si atilẹyin alabara.

9. Awọn pato

10. Atilẹyin ọja ati Support

KOAMTAC products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty card included in your package or visit the official KOAMTAC webojula.

For technical support, software downloads, or frequently asked questions, please visit the KOAMTAC support portal or contact their customer service directly. Contact details can typically be found on the manufacturer's webojula.