1. Ifihan
This manual provides essential information for the safe and effective use of your Philips F54T5/835/HO/EA/ALTO 49 Watt T5 High Output Fluorescent Bulb. Please read these instructions carefully before installation and retain them for future reference.
2. Alaye Aabo
- Aabo Itanna: Always disconnect power to the fixture before installing, removing, or cleaning the bulb. Failure to do so may result in electric shock.
- Mimu: Handle the bulb by its ends or base. Avoid touching the glass directly to prevent oils from your skin from affecting bulb performance or lifespan.
- Ibamu: Ensure the fixture is designed for T5 fluorescent bulbs with a G5 miniature bi-pin base and is rated for 49 watts. Using an incompatible fixture can damage the bulb or fixture.
- Pipin: In case of bulb breakage, ventilate the area and carefully clean up glass fragments and mercury residue according to local regulations. Do not use a vacuum cleaner.
- Idasonu: Fluorescent bulbs contain small amounts of mercury and must be disposed of according to local environmental regulations. Do not dispose of with regular household waste.
3. Ọja Ipariview
The Philips F54T5/835/HO/EA/ALTO is a 49-watt T5 High Output fluorescent bulb designed for general lighting applications. It features a G5 miniature bi-pin base and provides 5000 lumens of 3500K (warm white) light with a Color Rendering Index (CRI) of 85.
Aworan 1: Philips F54T5/835/HO/EA/ALTO 49W T5 High Output Fluorescent Bulb. This image displays the tubular glass bulb with its green G5 miniature bi-pin base on one end, ready for insertion into a compatible fixture.
4. Eto ati fifi sori
Follow these steps to install the fluorescent bulb:
- Agbara Pa: Ensure the power supply to the lighting fixture is completely turned off at the circuit breaker or wall switch.
- Yọ Bulb atijọ kuro (ti o ba wulo): If replacing an existing bulb, carefully twist the old bulb to align the pins with the slots in the lampohun tí ó di mọ́lẹ̀, lẹ́yìn náà fi pẹ̀lẹ́pẹ̀lẹ́ fà á jáde.
- Fi Bọlubu Tuntun sii: Align the two pins of the Philips F54T5/835/HO/EA/ALTO bulb with the slots in the fixture's lampholder. Gently push the bulb into the lampholder until the pins are fully seated.
- Rotate Bulb: Once seated, rotate the bulb approximately 90 degrees until it locks securely into place. Do not force the bulb.
- Pada Agbara pada: Tan ipese agbara pada si ẹrọ fifọ tabi iyipada odi.
- Idanwo: Tan ina yipada lati jẹrisi boolubu naa n ṣiṣẹ ni deede.
If the bulb does not light, refer to the Troubleshooting section.
5. Awọn ilana Iṣiṣẹ
The Philips F54T5/835/HO/EA/ALTO fluorescent bulb operates by being connected to a compatible fluorescent fixture. Once installed, the bulb is controlled by the fixture's power switch. Simply toggle the switch to turn the light on or off.
6. Itọju
- Ninu: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass surface with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Rọpo: Replace the bulb when it reaches the end of its useful life, indicated by flickering, dimming, or failure to light. Follow the installation steps in Section 4 for replacement.
7. Laasigbotitusita
If your Philips F54T5/835/HO/EA/ALTO bulb is not functioning as expected, consider the following:
- Bulb Ko Imọlẹ:
- Ṣayẹwo boya ipese agbara si imuduro wa ni titan.
- Ensure the bulb is correctly seated and locked into the lampawọn dimu.
- Verify that the fixture's ballast is functioning. A faulty ballast can prevent the bulb from lighting.
- Test with a known working bulb if available, or test the bulb in a known working fixture to isolate the issue.
- Fifẹ:
- Flickering can indicate the bulb is nearing the end of its life and needs replacement.
- Rí i dájú pé a gbé bulbu naa kalẹ̀ dáadáa nínú iampawọn dimu.
- A failing ballast can also cause flickering.
- Ijade Imọlẹ Dim:
- Boolubu le ti sunmọ opin ti igbesi aye rẹ.
- Ensure the bulb and fixture are clean and free of dust or debris.
If problems persist after troubleshooting, consult a qualified electrician or contact Philips customer support.
8. Awọn pato
| Iwa | Iye |
|---|---|
| Brand | Philips |
| Nọmba awoṣe | F54T5/835/HO/EA/ALTO |
| Imọlẹ Iru | Fuluorisenti |
| Wattage | 49 Wattis |
| Apẹrẹ boolubu | T5 (Tubular) |
| Bulb Base | G5 (Miniature Bi-Pin) |
| Imujade Imọlẹ (Imọlẹ) | 5000 Lumens |
| Iwọn otutu awọ | 3500 Kelvin (Gbona Funfun) |
| Atọka Rendering Awọ (CRI) | 85 |
| Gigun | 46 inches |
| Ohun elo | Glass, Copper (for pins) |
| Iwọn Nkan | 0.01 iwon |
| UPC | 046677405663 |
9. isọnu Alaye
This product contains mercury and must be disposed of in accordance with local, state, and federal laws. Do not dispose of fluorescent bulbs in regular household trash. Please visit www.epa.gov/cfl or contact your local waste management authority for recycling options.
10. Atilẹyin ọja ati Support
For warranty information or technical support regarding your Philips F54T5/835/HO/EA/ALTO fluorescent bulb, please refer to your purchase documentation or contact Philips customer service directly. Contact details can typically be found on the Philips official webaaye tabi lori apoti ọja.
